2026-09-10T18:32:39+01:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results39310finds-107107MAS-F100107TRANSPORTPOST MEDIEVALThis ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor. The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee. The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.SHIP36411224/173MAS2017-08-23T00:00:00ZTimberWith finder2017-08-23T08:34:54Z2018-05-23T13:57:54Z10711012083011428114PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081739.JPG262images/MASABB2024-10-09T14:16:36.896Zfinds-4545MAS-D100045BOTTLEPOST MEDIEVALBase of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.FOOD AND DRINK SERVING CONTAINER36361120/173MAS2017-05-17T00:00:00ZCONTAINERWith finder2017-05-30T11:34:20Z2020-02-28T15:54:03Z4511828115PAS57C96ECD001E82PAS57C96ECD001E82214362DorsetSZ058050.61968642-1.93068328princely.meaning.pulps10MAS MASMASGlass10879FragmentPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of WreckOnionbottle1.JPG150images/MASABB2024-10-09T14:15:14.327Zfinds-5353MAS-O100053BOTTLEPOST MEDIEVALOne gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - this examples therefore probably date to the 19th century, but pre-dating the 1880s.This item was found along with three candlesticks (MAS-D100039 and MAS-D100041). All of these items were recovered from the wreck of Josephine Willis, a New Zealand sail and steam propelled packet ship built in c.1840. The ship was carrying 110 people on board bound for Auckland, comprising ten First class passengers, 60 steerage and 40 crew. It sank in 1856 following a collision with Mangerton with the loss of 69 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Josephine Willis.Container3939180018561092/173MAS2017-05-28T00:00:00ZDRINK SERVING CONTAINER1025695Kent HER Number: TR 22 NE 45With finder2017-05-29T08:46:26Z2018-03-19T20:02:58Z531182815PAS57C96ECD001E82PAS57BC21F300115B218210KentTR183051.02800971.10748152immature.twang.uncouth10MAS MASMASGlass10879NINETEENTH CENTURYNINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck41_f3yhwrzgu1vk.jpg185images/MASABB2024-10-09T14:15:16.447Zfinds-4040MAS-D100040BOTTLEPOST MEDIEVALOne onion bottle dated to c.1700. Glass onion bottles were large hand-blown glass bottles, used aboard sailing ships to hold wine or brandy. For increased stability on rough seas, the bottles were fashioned with a wide-bottom shape to prevent toppling. Between c.1690 and c.1720 the outline of a wine bottle resembled an onion - a wide compressed globular body and a short neck (Robinson and Harding 2015). Most bottles before 1700 had a ring of glass just below the neck that gave anchorage to the string used to hold in variety of stoppers. The Dutch bottles usually had a longer neck than the English ones and featured a flat wraparound rim, while the English bottlenecks had an applied collar or laid on ring (Polak 2016).This item was found along with a large round jug (MAS-D100052) and were recovered from the Goodwin Sands, Kent.Container36361091/173MAS2017-05-23T00:00:00ZFood and liquid storage containerWith finder2017-05-23T19:42:07Z2017-10-04T09:49:26Z401182841415PAS5989C577001EA7PAS57BC21F300115B2MAS MASMASGlass10879BlownCompletePOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of Wreck40_IMG_02.jpg137images/MASLR2024-10-09T14:15:13.095Zfinds-5252MAS-D100052JUGPOST MEDIEVALOne badly damaged ceramic jug with marine encrustration. The vessel is probably stoneware, but possibly glazed redware as there appears to be the characteristic 'orange peel' texture of salt-glazed stoneware visible in the photo, with the 'reeding' that you get round the rims of stoneware vessels. If this is the case it is almost certainly German in origin. The rounded shape would place it somewhere in the second half of the 16th century or first half of the 17th century.This item was found along with an onion bottle (MAS-D100040) and were recovered from the Goodwin Sands, Kent.CONTAINER36361091/173MAS2017-05-23T00:00:00ZDRINK SERVING CONTAINERWith finder2017-05-23T19:42:07Z2017-10-03T14:03:20Z52120282315PAS57C96ECD001E82PAS57BC21F300115B2MAS MASMASStonewareIncompletePoorPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of Wreck40_mz32qhebl0cg.jpg138images/MASABB2024-10-09T14:15:16.205Zfinds-3838MAS-D100038BOTTLEPOST MEDIEVALFour glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - these examples therefore probably date to the 19th century, but pre-dating the 1880s.This item was found along with an ivy leaf teacup (MAS-D100051).FOOD AND DRINK SERVING CONTAINER36391090/173MAS2017-05-21T00:00:00ZWINE BOTTLEWith finder2017-05-21T14:02:28Z2017-09-26T13:13:09Z38418284115PAS57C96ECD001E82PAS57BC21F300115B218210KentTR233651.079963081.18236287petty.jetting.hazy10MAS MASMASGlass10879CompleteFairPOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck38_az9rlbhpze9s.jpg131images/MASABB2024-10-09T14:15:12.611Zfinds-5151MAS-D100051DRINKING VESSELPOST MEDIEVALOne ivy leaf patterned teacup marked with the Davenport logo. This transfer printed refined ware (either pearlware or whiteware) cup dates to the 19th century. John Davenport acquired his own pottery in 1794, initially producing cream coloured blue-printed earthernware. Within 12 years the company's reputation and the quality of its porcelain was such that the future King George IV was ordering services from the company. John Davenport retired in 1830 and the company was continued to be run by his sons and their children until 1887 when the factory closed and the company was acquired by Burleigh Pottery.This item was found along with four square glass bottles (MAS-D100038).Container39391090/173MAS2017-05-21T00:00:00ZCUPWith finder2017-05-21T14:02:28Z2017-09-26T13:22:32Z5111928415PAS57C96ECD001E82PAS57BC21F300115B218210KentTR233651.079963081.18236287petty.jetting.hazy10MAS MASMASEarthenwareCompleteNINETEENTH CENTURYNINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck38_8a0k1tqgoyrk.jpg133images/MASABB2024-10-09T14:15:15.964Zfinds-3636MAS-D100036SAUCERPOST MEDIEVALPewter bowl measuring 15 inches in diameter by 2 1/2 inches in depth. This find is a pewter dish or saucer (the term 'saucer' is used here to describe vessels used to contain sauces, in order to disguise or enhance the taste of food), probably dating somewhere between the 16th and 18th centuries - there are very similar examples, for instance, in 16th century contexts from Nonsuch Palace in Surrey (Rosemary Weinstein, 'Pewter vessels', in Biddle 2005). That doesn't mean that this vessel is a high-status object - saucers and dishes were among the most commonly made pewter items, and would have been in use in humbler households too. Pewterers call chargers, dishes, plates and saucers 'sadware'. The difference between them is based on their sizes, with some overlap between the four occurring. Generally, they are now separated as saucers being anything under 7" (17.7 cm) in diameter, plates being 7" to 11" (17.7 to 27.8 cm) in diameter, dishes being 11" to 18" (27.9 to 45.6 cm) in diameter, and chargers being anything larger than this. Early British sadware is usually characterised by a plain rim, a gently-rounded bouge and, often, a raised centre to the well. Unfortunately, only a small fraction survives in the archaeological record due to what we would now term recycling, but also because it does not survive well in the environment. Up until about 1640 styles remained relatively static, before a period of rapid changes for nearly a century occurred, before settling back to a stable style which continued until the use of pewter for sadware died out in the 19th century. From c.1640 there was a vogue for sadware with a steeper bouge and broad rim. In Britain, massive amounts of sadware was made between 1650 and 1780 as households across the social divide replaced their wooden tableware with 'modern' pewter. From c.1660 there was a demand for rims with multiple-reeded edges, before the rim widths steadily shrank back to where they had been, though some very narrow rims were also produced. Around 1700, the single reeded rim became popular and the plain rim also re-appeared, though without the gentler bouge of the earlier version. The single reed continued to be produced throughout the 18th century on sadware intended for export to America, but fell out of favour c.1730 for the domestic British market, with the plain rim dominated the market until production of pewter sadware ceased. A few variations did occur in the 18th century when non-circular plates with wavy or polygonal edges became popular amongst the wealthy in Britain in the later part of the century; engraved owners' crests were popular for a while and at the beginning of the century wrigglework decoration had a brief spell of popularity.FOOD AND DRINK SERVING CONTAINER36361056/173MAS2017-04-23T00:00:00ZSAUCERWith finder2017-04-25T10:27:27Z2017-09-26T13:12:49Z36133282115PAS57C96ECD001E82PAS57BC21F300115B2MAS MASMASTin or tin alloy11849IncompleteFairPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of Wreck36_IMG_01.jpg117images/MASABB2024-10-09T14:15:11.944Zfinds-3232MAS-D100032WATER CRAFT EQUIPMENTPOST MEDIEVALA wooden belaying pin, approximately 0.4 m in length. Belaying pins are either solid metal or wooden objects used on sailing ships to secure the running rigging. They are still seen today on traditional square rigged ships and replica vessels. More modern sailing vessels have tended to replace them with fixed cleats. Their design has little changed, comprising a rounded handle and cylindrical shaft of varying length and thickness, dependant on the workload placed on it. The shaft would fit into holes in pinrails, which lined the inside of the bulwarks around the base of the ship's mast, or a fife rail, which was a free-standing rail set on posts to hold the belaying pins to secure the ship's halyards. The ropes or lines would be wrapped around the pin in a figure of eight pattern to secure them. Similarly designed pins, known as thole pins, were inserted into the gunwales to act as a fulcrum for oars on small boats.This item was found along with two pulley sheeves (MAS-D100049) and a marble tile (MAS-D100050).TRANSPORT36391032/173MAS2017-03-14T00:00:00ZWATER CRAFT EQUIPMENTWith finder2017-03-14T07:28:01Z2017-09-26T13:11:50Z3211428415PAS57C96ECD001E82PAS57C96ECD001E822MAS MASMASWood11988CompletePOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of WreckIMG_3921.JPG104images/MASABB2024-10-09T14:15:10.995Zfinds-4949MAS-D100049WATER CRAFT EQUIPMENTPOST MEDIEVALTwo circular wooden pulley sheaves. It is not clear whether these wooden pulley sheaves were a pair or from single sheave pulleys. Generally made from ash (Fraxinus), hickory (Carya) in the case of North America, or Lignum vitae. Lignum vitae, Latin for 'wood of life', is a trade wood, also called Guayacan or Guaiacum from the trees of the genus Guaiacum. The trees are indigenous to the Caribbean and the northern coast of South America and have been an important export crop to Europe since the beginning of the 16th century due to its extraordinary combination of strength, toughness, and density. It was also considered to have self lubricating properties. Ash though tough and elastic is prone to wet rot. Roller bushes were also introduced during the 1880s to reduce friction on the sheave pin. A sheave's size depended mostly on the rope it handled, the higher up the rigging the block was, and the lighter the ropes, the smaller they were. Sheaves also shrank in size as rope quality improved over time, and the introduction of iron parts also contributed to this process. However, many ships continued to use larger blocks due to their making the work easier and therefore requiring less crew to operate.This item was found along with a wooden belaying pin (MAS-D100032) and a marble tile (MAS-D100050).WATER CRAFT36391032/173MAS2017-03-14T00:00:00ZSHIPWith finder2017-03-14T07:28:01Z2017-09-26T13:21:53Z49214283115PAS57C96ECD001E82PAS57C96ECD001E822MAS MASMASWood11988UncertainFairPOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of WreckIMG_3921.JPG164images/MASABB2024-10-09T14:15:15.476Z