2024-03-28T09:46:31+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results2110finds-111111MAS-F100111AIRCRAFT COMPONENTMODERNAluminium aircraft section, heavily corroded and damaged. No identifying marks or plates visible, though two cross member plate remnants present. 870 x 45mm.
The lack of identifying marks means that the type and origin of the aircraft cannot be definitively identified from this recovered section. Initially thought to be part of a piston engine support frame from something like a Spitfire fighter, a Dakota transport aircraft, or perhaps one of the multi-engined bombers,this theory was discarded as these are generally circular in section. The double row of rivet holes down one side (presumably where it attached to the skin) suggest it is more likely a stringer of some description. A stringer is a Longitudinal member (i.e. in the fuselage aligned with the longitudinal axis and in wings and tail surfaces perpendicular to this axis) which gives the airframe its shape and provides the support for the skin. In fuselages, they link frames and in aerofoils they link ribs. The consensus therefore, is that it is from the outer wing rib of a single engine aeroplane or the fin/tail plane rib of a larger multi engine aircraft from the Second World War; and has characteristics that suggest it is from a Royal Air Force or British aircraft. However, due to the corrosion and the very close variations in measurement between both metric and imperial measurements, i.e. millimetres (mm), standard wire gauge (swg) or thousands of an inch (thou), used by aircraft designers during this period, the use of the spacing and diameter of rivets, bolt holes and other spacings combined with any drilling/stamping errors means that these do not help in identifying the piece. The damage to the piece also means that the use of rivet pitch, which might identify the manufacturer, rather than the country of origin, would be open to a wide degree of error.TRANSPORT41411218/173MAS2017-08-23T00:00:00ZVehicle componentWith finder2017-08-23T08:47:41Z2018-05-23T13:59:19Z111458701272811422625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_201708174.JPG288images/MAS2018-05-23T12:59:19.121Zfinds-109109MAS-F100109BOATMODERNThis find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth.
Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.TRANSPORT41411219/173MAS2017-08-23T00:00:00ZWATER CRAFTWith finder2017-08-23T08:40:58Z2018-05-08T08:40:03Z109524094012728114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081726.JPG277images/MASABB2018-05-08T07:40:03.024Z