2024-03-28T21:31:48+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results112220finds-193193MAS-D100193ENGINENINETEENTH CENTURYUnidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side approximately 25 mm from the upper edge. This circular aperture, with the lug at its centre, has a diameter of c. 95 mm. The interior of the object is not recessed beneath the edges of the aperture and therefore forms a a solid shape between the solid and open faces, conforming to the circumference of the aperture. The solid face, presumably forming the rear of the object, is approximately 6 mm thick. The outline of what may be a screw hole for affixing is visible 3 - 4 mm from the top edge just to right of centre on the solid face. The object has 3 closed and one open side, where the circular aperture flairs outwards. Of the closed sides two are straight, running at right angles to the opens side, with the remaining closed side opposite the open side being slightly curved. This slightly more aesthetically pleasing element may indicate that this is in fact the top edge of the object.
The intended function of the item is not immediately apparent, though clearly something is intended to either run through the object or pivot around the central lug. Though no firm identification has been established the suggested functions include a bearing case, a rail mount, a hinge pivot or a cable relay.This item was found with pepper pot (MAS-D100190).TRANSPORT3941118/183MAS2018-06-03T00:00:00ZVESSEL COMPONENTWith finder2018-06-21T20:58:32Z2020-03-26T13:10:03Z1021935111417415PAS5C5037EF001C0322625East SussexTV768950.674056230.48951592undersigned.participation.rapidity10MAS MASMASCopper alloy10627CompleteNINETEENTH CENTURYMODERNDiving193_193_IMG_01.JPG465images/MASPhil Trim2020-03-26T13:10:03.103Zfinds-192192MAS-D100192PERSONAL ACCESSORYNINETEENTH CENTURYOne gold T piece to believe part of a watch chain. These pieces were used to fasten the watch chain to an item of clothing, most often a wasitcoat. The T piece has a rounded embossing in the centre of the strip, with a small ring attached at this point for attaching the piece to a chain. The right end of the piece has a single ringed pattern shortly before terminating in a straight clean end. The left side of the piece has steps from the thicker piece to a thinner section extruding out a short distance. Given the date of sinking of the vessel from which it was recovered this item can reliably be dated to the middle of the 19th century. All of these items were recovered from the wreck of SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.
This item was found with a nineteenth century coin (MAS-D100191).DRESS AND PERSONAL ACCESSORIES393918781134/183MAS2018-06-21T00:00:00ZWATCH883110Kent HER Number: TR 33 SW 26With finder2018-06-21T19:59:25Z2020-03-26T13:22:58Z192150115PAS5C50379B001E6C218210KentTR102650.9950660.99125136streamers.tanked.swan10MAS MASMASYellow metalFragmentNINETEENTH CENTURYNINETEENTH CENTURYDiving192_192_IMG_01.jpg464images/MASRobbie Trevelyan2020-03-26T13:22:58.721Zfinds-191191MAS-D100191COINNINETEENTH CENTURYThis find comprises of a single gold coin from the USA with a value of $10. This 1847 minted coin was created for standard circulation and measures 27 mm in diameter with a weight of 16.72 grammes, the coin is minted in an alloy of 90% gold and 10% copper. It is of a type known as a Coronet Head - Eagle, based on the depictions on each face. The head side shows a side profile of lady liberty wearing a coront inscribed with the word "LIBERTY", the obverse bearing a spread eagle with a crest upon it and the words "UNITED STATES OF AMERICA TEN D." inscribed around the circumference of the coin. The edge of the coin is finished with a pattern known as reeding. A total of 862,258 of these coins were minted in 1847 and these are considered to be of high value due to their rarity. Another batch of coins was produced in the same year but bear the letter O below the eagle on the obverse face (https://en.numista.com/catalogue/pieces16125.html accessed 10 March 2020). The engraving of the master coin was carried out by a Christian Gobrecht and the coins were minted in Philadelphia (https://www.usacoinbook.com/coins/4090/gold-10-eagle/coronet-head/1847-P/ accessed 10 March 2020).
It is not clear why the SS Pomerania was carrying such a coin, though the vessel carried passengers between Europe and the United States. It may have belonged to a passenger, although as the vessel was en route to the USA this would have required changing currency prior to departure. Alternatively it may have belonged to a crew member or the vessel itself for purchasing supplies and the like whilst in US ports.This item was recovered from the wreck of SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.
This item was found with an unidentified object, possibly part of a watch chain (MAS-D100192).CURRENCY3939184718471134/183MAS2018-06-21T00:00:00ZCOIN883110Kent HER Number: TR 33 SW 26With finder2018-06-21T19:59:24Z2020-03-26T13:23:29Z16.721912712353410215PAS5C50379B001E6C218210KentTR102650.9950660.99125136streamers.tanked.swan10MAS MASMASGold10892Copper10626StampedCompleteGoodNINETEENTH CENTURYNINETEENTH CENTURYDiving191_191_IMG_01.jpg462images/MASRobbie Trevelyan2020-03-26T13:23:29.684Zfinds-190190MAS-D100190CONTAINERSPOST MEDIEVALThis find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and that the figure is actually holding a mug of ale. It should have a hole in the bottom where the cork would have been placed once filled. As this figure was found in isolation, it is not clear whether it was part of the sunken vessel's cargo, a posession of the crew/passengers, a mess item, or an object discarded/lost over an earlier wreck site by chance.This item was found with engine part (MAS-D100193).Container39391118/183MAS2018-06-03T00:00:00ZFOOD SERVING CONTAINERWith finder2018-06-21T15:58:31Z2020-03-26T13:11:07Z19065145152115PAS5C503E21001138PAS5E4D4FFA001DA522625East SussexTV768950.674056230.48951592undersigned.participation.rapidity10MAS MASMASCeramic10539IncompleteFairNINETEENTH CENTURYNINETEENTH CENTURYx41047Diving190_190_IMG_01.JPG467images/MASJoaquin Callejo Gomez2020-03-26T13:11:07.795Zfinds-189189MAS-O100189NAILPOST MEDIEVALThe find consists of 8 iron nails and an unidentifiable object that contains one further nail and is made of, or covered in, what appears to be fur.
The nails range in length from 135 - 175 mm, and c. 10 - 20 mm in width at their widest point below the head. All 8 nails have a rose type head and taper to a broad point. These features suggest that the nails were hand wrought, rather than cut or wire, a method where each nail is manufactured individually by hand on a blacksmiths anvil. The invention of the slitting mill c. 1590 simplified this process by manufacturing iron rods from which nails could be cut, tapered and given a head. Between 1790 and 1820 this process began to be replaced by machine cut nails, before eventual replacement by wire nails in the late 19th century. These nails, therefore, likely date from before the mid-19th century. The level of preservation of iron objects in an intertidal environment also suggests that they are likely to be more recent than the 1590 development of the slitting mill, a date of mid-18th to mid-19th centuries is tentatively suggested.
Images of the other object were sent to in-house finds secialist and animal bone specialist at Wessex Archaeology who both said it appeared to be animal skin that had been bundled up but could not tell what it was for. As the object has no readily diagnostic features, it remains unidentifiable.These objects were found during a walk on the River Thames near Rotherhithe. The finder notes that there were possible more than a 100 nails in total, spread over an area about 1.5 square metres.
The objects have been deemed as non-wreck material by the Receiver of Wreck and therefore do not have a droit number.UNASSIGNED36393MAS2018-06-13T00:00:00ZFastening2018-06-13T08:36:15Z2020-03-30T14:25:50Z18920175183234PAS5C5037EF001C03241441Greater London AuthorityTQ347951.49407113-0.07113608path.across.back10MAS MASMASIron11019OrganicIncompletePoorPOST MEDIEVALx41047NINETEENTH CENTURYx41047Other chance find189_DSC_0067.JPG456images/MASPhil Trim2020-03-30T13:25:50.487Zfinds-181181MAS-D100181TIMBERPOST MEDIEVALFind consists of two sections of timber or wood. The first measures approximately 1650 mm in length, 85 mm in width and 90 mm in depth. There are no diagnostic elements visible upon the timber, such as tool marks or fixing points, and therefore its function remains unknown. It does, however, appear to be faced and is therefore unlikely to be a piece of natural driftwood.
The second piece of wood measures approximately 196 mm in length and 20 mm in width. There is at least one possible nail hole visible and again it appears to have been faced or worked by human hands. It is heavily degraded and this, coupled with a lack of diagnostic details, preclude any comment on its original function or use.
Both pieces of timber appear to have been at least prepared for use by human action, though how they came to be in the sea or when is unknown at this point. It may be that they relate to ships timbers, originating from a wreck or discarded overboard, part of shoreline installations, such as a pier or jetty, or simpley be lost cargo from a ship carrying timber as cargo. The nail hole in the second piece suggests that this has been used and is therefore unlikely to be cargo, whereas the lack of bolt holes or othwer fixings on the larger timber may suggest the opposite.
The fact that the larger timber was photographed with with a swivel gun (MAS-D100180) may indicate that it was recovered from the same area on the seabed.SHIP36391094/183MAS2018-05-22T00:00:00ZTimber2018-06-01T09:21:57Z2020-03-26T15:02:12Z18190851650114115214362DorsetSY637150.53759313-2.52346561feeds.passive.slims10MAS MASMASWood11988FragmentPOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving181_IMG_2022.jpg446images/MAS2020-03-26T15:02:12.325Zfinds-180180MAS-D100180CANNONPOST MEDIEVALThis item appears to be a small calibre black powder weapon, such as a swivel gun, commonly mounted on vessels throughout the age of sail as well as being used in terrestrial settings. The weapon is approximately 750 mm in overall length, with external muzzle diameter of approximately 110 mm flaring to an external diameter of 180 mm at the breech end. The condition of the artefact is poor due to heave concretion, though visual analysis suggests it is a muzzle loading gun. No Trunnions for mounting the weapon are immediately apparent despite the concretion.
As their name suggests, swivel guns were small cannons mounted on iron staves or sticks so that the point of aim could be quickly and easily changed. They are essentially close in defence weapons, designed to be fired over short distances to deter attempts to board the vessel which they are defending. Commonly the ammunition used would be cannister, a small case packed with musket balls or the like, which upon firing would spread out in a cone potentially hitting multiple targets. Such a weapon would be particularly effective against small boats or boarding parties where large numbers of enemies would be packed together.This find comes from an unidentified wreck known as the Brandy Wreck, situated east of Portland Harbour in Weymouth Bay, Dorset. An investigation of the newly discovered wreck was carried out by Wessex Archaeology (2016) in conjunction with The Shipwreck Project, a local organisation who discovered the site, and at the behest of Historic England. The lack of datable evidence from secure contexts, structural elements of a vessel and other factors meant that a precise date or name of the vessel could not be determined. Broadly, the vessel is thought to date between 1600 and 1825 AD and may relate to a naval or merchant vessel, or potentially be a chance accumulation of artefacts. Vessel currently has no NRHE or HER designation numbers.
This item was found with a ships timber (MAS-D100177), length of braided copper (MAS-D100183) and a flat strip of copper (MAS-D100184).ARMOUR AND WEAPONS36391091/183MAS2018-05-22T00:00:00ZfirearmN/AWith Finder2018-06-01T08:40:20Z2020-03-26T15:57:58Z180180750183715214362DorsetSY737550.57411317-2.38265074commander.evening.twist10MAS MASMASIron11019UncertainConcretedPOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving180_IMG_2029.jpg441images/MAS2020-03-26T15:57:58.537Zfinds-184184MAS-D100184UNIDENTIFIED OBJECTPOST MEDIEVALA single piece of copper alloy sheeting, measuring approximately 70 mm by 55 mm with a thickness of c. 2 mm. The item bears 4 grooves pressed into the metal along the long axis on one face, only one of which is evident on the opposite face. The item appears to be distorted from its original shape, all the edges appear intact suggesting it is otherwise complete. The function of such an item is unclear, though it was recovered in close proximity to a swivel gun (MAS-D100180) and may relate to the functioning of such a weapon in some way.This find comes from an unidentified wreck known as the Brandy Wreck, situated east of Portland Harbour in Weymouth Bay, Dorset. An investigation of the newly discovered wreck was carried out by Wessex Archaeology (2016) in conjunction with The Shipwreck Project, a local organisation who discovered the site, and at the behest of Historic England. The lack of datable evidence from secure contexts, structural elements of a vessel and other factors meant that a precise date or name of the vessel could not be determined. Broadly, the vessel is thought to date between 1600 and 1825 AD and may relate to a naval or merchant vessel, or potentially be a chance accumulation of artefacts. Vessel currently has no NRHE or HER designation numbers.
This item was found with a swivel gun (MAS-D100180), a timber (MAS-D100177) and a length of copper wire (MAS-D100183).363913MAS2018-05-22T00:00:00Z2018-06-01T08:28:33Z2020-03-26T16:15:52Z1845570174415PAS5C5037EF001C03214362DorsetSY737550.57411317-2.38265074commander.evening.twist10MAS MASMASCopper alloy10627CompleteCorrodedPOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving184_MAS_D100183_2.JPG487images/MASPhil Trim2020-03-26T16:15:52.417Zfinds-183183MAS-D100183UNIDENTIFIED OBJECTPOST MEDIEVALFind comprises of a single length of copper or copper alloy wire, measuring approximately 140 mm long and 10 mm in thickness. The wire consists of a central core of copper alloy strands, which are then wrapped or sheathed in a strand of copper alloy tightly wound around the core. The wire appears to taper towards one end, though it is not clear if this part of its manufacture or damage occurring to it during its use or post deposition on the seabed. The function of this item, clearly incomplete as evidenced by its severed ends, is unclear. Its finding was recorded as being in close proximity to a swivel gun (MAS-D100180) and it is possible that its function related to the use or maintenance of the weapon. It would seem unlikely that it functioned as a cable, due to the use of copper alloy which is not known for it tensile strength. Similarly, though copper is used extensively in modern electrical wiring, the date of the associated Brandy wreck would preclude its use within electronics. Of course this find may be intrusive and not relate to the wreck at all. One further consideration is the possibility it is a fragment of a lightning rod that may have been fitted to a ships mast for protection during and electrical storm at sea.This find comes from an unidentified wreck known as the Brandy Wreck, situated east of Portland Harbour in Weymouth Bay, Dorset. An investigation of the newly discovered wreck was carried out by Wessex Archaeology (2016) in conjunction with The Shipwreck Project, a local organisation who discovered the site, and at the behest of Historic England. The lack of datable evidence from secure contexts, structural elements of a vessel and other factors meant that a precise date or name of the vessel could not be determined. Broadly, the vessel is thought to date between 1600 and 1825 AD and may relate to a naval or merchant vessel, or potentially be a chance accumulation of artefacts. Vessel currently has no NRHE or HER designation numbers.
This item was found with a swivel gun (MAS-D100180), a timber (MAS-D100177) and a flat strip of copper (MAS-D100184).36391091/183MAS2018-05-22T00:00:00Z2018-06-01T08:28:32Z2020-03-27T15:32:00Z1831401531415PAS5C5037EF001C03214362DorsetSY737550.57411317-2.38265074commander.evening.twist10MAS MASMASCopper10626FragmentCorrodedPOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving183_MAS_D100184_1.JPG485images/MASPhil Trim2020-03-27T15:32:00.545Zfinds-179179MAS-O100179ORDNANCEPOST MEDIEVALThis find consists of 12 lead balls varying in diameter between c. 15 mm and 21mm. All appear unfired and bear the mould lines and sprue marks from being hand moulded in a 2 part mould. The balls themselves are in fair condition, though some bear concretion/encrustation.
Images of the finds were sent to Charles Trollop, an expert in historical ordnance, who advised that in all likelihood these are English Standard Musket (0.775 " or 19.79 mm) and Carbine (0.615 " or 15.64 mm) Balls. These standards relate to most of the black powder/smooth bore period from the 17th to 19th centuries.This find comes from an unidentified wreck known as the Brandy Wreck, situated east of Portland Harbour in Weymouth Bay, Dorset. An investigation of the newly discovered wreck was carried out by Wessex Archaeology (2016) in conjunction with The Shipwreck Project, a local organisation who discovered the site, and at the behest of Historic England. The lack of datable evidence from secure contexts, structural elements of a vessel and other factors meant that a precise date or name of the vessel could not be determined. Broadly, the vessel is thought to date between 1600 and 1825 AD and may relate to a naval or merchant vessel, or potentially be a chance accumulation of artefacts. Vessel currently has no NRHE or HER designation numbers.ARMOUR AND WEAPONS36391095/183MAS2018-05-22T00:00:00ZAMMUNITIONWith Finder2018-06-01T08:28:31Z2020-03-26T16:00:29Z17921129415214362DorsetSY737550.57411317-2.38265074commander.evening.twist10MAS MASMASLead11094CompletePOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving179_IMG_2041.jpg439images/MAS2020-03-26T16:00:29.552Zfinds-178178MAS-D100178TOOTHBRUSHPOST MEDIEVALThis find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secured. The condition of the brush is poor, especially the handle where the bone is heavily degraded. No markings are evident anywhere on the object. The brush is of a type used for cleaning teeth from the 17th through to early 20th century, closer dating is not possible without markings or further typological detail (https://www.dentalartsmv.com/the-long-and-remarkable-history-of-the-toothbrush/ accessed March 2020).This find comes from an unidentified wreck known as the Brandy Wreck, situated east of Portland Harbour in Weymouth Bay, Dorset. An investigation of the newly discovered wreck was carried out by Wessex Archaeology (2016) in conjunction with The Shipwreck Project, a local organisation who discovered the site, and at the behest of Historic England. The lack of datable evidence from secure contexts, structural elements of a vessel and other factors meant that a precise date or name of the vessel could not be determined. Broadly, the vessel is thought to date between 1600 and 1825 AD and may relate to a naval or merchant vessel, or potentially be a chance accumulation of artefacts.
Vessel currently has no NRHE or HER designation numbers.DRESS AND PERSONAL ACCESSORIES36391090/183MAS2018-05-21T00:00:00ZToothbrushN/AWith Finder2018-06-01T06:40:01Z2020-03-26T16:00:04Z1781516013215PAS5C5037EF001C03PAS5C5037EF001C03214362DorsetSY737550.57411317-2.38265074commander.evening.twist10MAS MASMASOrganicIncompletePOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving178_IMG_2026.jpg438images/MASPhil Trim2020-03-26T16:00:04.103Zfinds-177177MAS-D100177TIMBERPOST MEDIEVALSection of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships timber that has been exposed for at least part of its life on the sea bed.This find comes from an unidentified wreck known as the Brandy Wreck, situated east of Portland Harbour in Weymouth Bay, Dorset. An investigation of the newly discovered wreck was carried out by Wessex Archaeology (2016) in conjunction with The Shipwreck Project, a local organisation who discovered the site, and at the behest of Historic England. The lack of datable evidence from secure contexts, structural elements of a vessel and other factors meant that a precise date or name of the vessel could not be determined. Broadly, the vessel is thought to date between 1600 and 1825 AD and may relate to a naval or merchant vessel, or potentially be a chance accumulation of artefacts. Vessel currently has no NRHE or HER designation numbers.
This item was found with a swivel gun (MAS-D100180), length of braided copper (MAS-D100183) and a flat strip of copper (MAS-D100184).TRANSPORT36391091/183MAS2018-05-22T00:00:00ZSHIP2018-06-01T06:40:00Z2020-03-26T15:59:14Z177352201142315PAS5C5037EF001C03214362DorsetSY737550.57411317-2.38265074commander.evening.twist10MAS MASMASWood11988IncompletePoorPOST MEDIEVALx41047NINETEENTH CENTURYx41047Diving180_IMG_2025.jpg445images/MASPhil Trim2020-03-26T15:59:14.22Zfinds-175175MAS-D100175SHIP FITTINGSNINETEENTH CENTURYTwo brass deck water filler plates and one ceramic door number (45).
The water filler plates are 150 mm in diameter and approximately 100 mm thick. They are both heavily degraded and concreted, distorting their 'mushroom-shaped' original form. It appears they have screws running through the wider top surface and hanging down below next to the tinner plug interior. The screws are approximately 50 mm long and 5 mm in diameter. This type of ships fiitting is used to provide an access point by which to fill water tanks on a vessel and are common on many vessels, from pleasure craft to commercial vessels, up until the present. A hole would be drilled through the deck to accomodate the tube and the outer face of the plate would be flush with the deck, the central cap could then be unscrewed to allow a water pipe to be inserted and the tank filled. The plates are manufactured in a material, such as brass or stainless steel, is resistant to corrosion from sea water thereby protecting the rest of the pipework which would connect the pipe to the tank itself fitted lowr in the vessel.
The ceramic door number is 50 mm in diameter, and in fair condition. The number '45' has faded, and the white ceramic has been stained yellow in places. Near the edges either side of the number there are two holes roughly 3.5 mm in diameter, used to secure the number plate in place. The exact use for this item is difficult to determine, as it could be cargo or more likely ship fittings. It may correspond to cabin door numbers, crew lockers or the like, its high quality finish suggests that it is unlikely to be part of the crew or operating areas of the vessel and therefore probably relates to the accomodation of the 100 or more passengers the vessel could carry.These items were recovered from the wreck of the SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.39391878073/183MAS2018-05-06T00:00:00Z883110Kent HER Number: TR 33 SW 262018-05-09T11:27:36Z2020-03-26T15:39:40Z17510015012454515PAS5C50379B001E6C218210KentTR323251.040489161.30806705resemblances.unopposed.audiobooks10MAS MASMASSteel11786Ceramic10539CompleteEncrustedNINETEENTH CENTURYNINETEENTH CENTURYDiving175_IMG_4997Large.JPG435images/MASRobbie Trevelyan2020-03-26T15:39:40.161Zfinds-174174MAS-D100174CUTLERYNINETEENTH CENTURYThis record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or have had silver plating which can also corrode to a similar colour. There may be a hallmark or makers mark stamped on the back of the object that may shed more light on where it was manufactured. The date of this item is given by the wreck from which it was recovered, which sank in 1878.All of these items were recovered from the wreck of SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.
This item was found with a clock (MAS-D100173), a decorative lead object (MAS-D100146) and crockery fragments (MAS-D100138).Spoon39391878320/173MAS2018-03-26T00:00:00Z883110Kent HER Number: TR 33 SW 262018-05-02T10:10:08Z2020-03-26T16:10:28Z174172415PAS5C5037EF001C03218210KentTR232951.017114981.17805502devoting.snowstorm.sobbing10MAS MASMASCopper alloy10627IncompleteCorrodedNINETEENTH CENTURYNINETEENTH CENTURYDiving174_IMG_6351.jpg741images/MASPhil Trim2020-03-26T16:10:29.018Zfinds-138138MAS-D100138CONTAINERSNINETEENTH CENTURYTwo shards of crockery with makers mark present. The stamp is made up of letters "H A P A G" and a stylised admiralty anchor which has a wooden stock behind a shield. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. The stamps would have been on the base of the corckery therefore it is not clear whether these pieces would have belonged to bowls or plates when they were in use. The shards are white, with dark flecked inclusions and yellowish patches. It is more than likely that these pieces were part of the vessel's everyday tableware.All of these items were recovered from the wreck of SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.
This item was found with a decorative lead object (MAS-D100146), six clock parts (MAS-D100173), and a fork or spoon handle (MAS-D100174).CONTAINER39411320/173MAS2018-03-26T00:00:00ZFOOD AND DRINK SERVING CONTAINER883110Kent HER Number: TR 33 SW 26With finder2018-05-02T10:10:08Z2020-03-26T16:11:45Z138251115PAS5C50379B001E6C218210KentTR232951.017114981.17805502devoting.snowstorm.sobbing10MAS MASMASCeramic10539FragmentFairNINETEENTH CENTURYMODERNDiving173_IMG_6356.JPG431images/MASRobbie Trevelyan2020-03-26T16:11:45.896Zfinds-146146MAS-D100146UNIDENTIFIED OBJECTNINETEENTH CENTURYFind consists of an ornate metal piece, bearing a flyr de lys type of design above a solid bar, presumably used for mounting. No dimensions were given, though it is suggested to be made from lead and H shaped, the finder described it as "part of a fireguard from the ship room". This material type would seem unsuitable for such a purpose, therefore it is still unclear what the purpose of this object is, although it is generally accepted that it is a decorative object of some sort.All of these items were recovered from the wreck of SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.
This item was found with a spoon/fork handle (MAS-D100174), fragments of a clock (MAS-D100173) and crockery fragments (MAS-D100138).Decorative Piece39392318781320/173MAS2018-03-26T00:00:00Z883110Kent HER Number: TR 33 SW 26With finder2018-05-02T10:10:08Z2020-03-26T16:13:14Z146193115PAS5C5037EF001C03218210KentTR232951.017114981.17805502devoting.snowstorm.sobbing10MAS MASMASLead11094UncertainFairNINETEENTH CENTURYMiddleLateNINETEENTH CENTURYDiving146_Capture2.JPG743images/MASPhil Trim2020-03-26T16:13:14.659Zfinds-173173MAS-D100173CLOCKNINETEENTH CENTURYThis record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks.
Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular aperture and a ridge running around its circumference. The verdigris corrosion on this item only affects one half of the object, suggesting that it has been partially protected whilst on the seabed. The remaining item is considerably more corroded, though it still appears to be made from a copper alloy. It comprises a hollow circle with a band dividing the central aperture in equal halves, opposite the end of this band are two circular fixing points with screw holes attached to the outside central circular element. The central band has a square hole in its centre, which is unlikely to be much more than 5 mm across. There is an additional element that obscures the upper half of the central circular element which cannot be accurately described from the object.
The sixth clock part described by the finder is a flat copper alloy plate with a minimum of 18 holes drilled into it in addition to two square, one rectangular and one open rectangular aperture/s. At the top of the item is what appears to be a latch or clip. This object appears to be part of the mounting for the mechanism, and several of the drilled holes bear the shadows of where bolts and screws would have been attached. Most notably though is the inscription S Thomas, Thomaston C, US which can be observed. This refers to the manufacturer of the time piece, the Seth Thomas Clock Company, details of which are described in the next section.
A square piece of glass is described by the finder as being the clock face associated with the clock parts described above. Consultation online with examples of clocks manufactured by S Thomas support this use for the glass, as some of their models do have square faces.
The final object relating to clocks is a large oval ring of copper alloy which is described by the finder as the clock face from a grandfather clock. Its size, in comparison to the glass face, would certainly suggest it is from a different larger time piece. To the bottom right of the photograph it is possible to observe a hinge on the outside of the ring, whilst diametrically opposite a possible catch can be seen. These features suggest an opening element, presumably holding an oval glass clock face, may have attached to the recovered item. No other diagnostic features are immediately apparent from the photo provided.All of these items were recovered from the wreck of SS Pomerania, a German ocean liner steamer built in 1873 by J. Caird & Co., in Greenock. This vessel was one of many owned by the Hamburg Amerikanische Packetfahrt Actien Gesellschaft (HAPAG); a transatlantic shipping enterprise established in Hamburg in 1847 that transported hundreds of thousands of emigrants from Germany, Scandinavia, and eastern Europe to the United States, Canada, Latin America, and other destinations around the world. The ship sank in 1878, 5 miles SE of Folkestone whilst carrying 109 passengers and 111 crew en route from New York to Cherbourg and Hamburg, last from Plymouth, following a collision with Welsh barque Moel Eilian and resulting in the loss of 55 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Pomerania.
Seth Thomas Clock Company - One of the clock pieces identified from this find bears the inscription S Thomas, Thomaston C, US. Seth Thomas (1785-1859) was a clock maker from Plymouth Hollow, Connecticut, USA. He began making clocks at his site in 1814 and established the company in 1853, which was passed to his sons and continued as a family business into the 20th century. In 1931 the company became a subsidiary of the General Time Instruments Corporation and eventually passed from family control, General Time announced its closure in 2001. Shortly after the death of the company's founder in 1865, the town of Plymouth Hollow was renamed Thomaston in his honour. This then firmly dates the manufacture of this clock to between 1865 and 1878 when the Pomerania sank. (http://www.nationalclockrepair.com/Seth_Thomas_Clock_History.php accessed January 2020).
These items were found with a spoon/fork handle (MAS-D100174), a decorative lead object (MAS-D100146) and crockery fragments ( MAS-D100138).S THOMAS/THOMASTON C/USMEASUREMENT393923186518781320/173MAS2018-03-26T00:00:00ZAn instrument used to measure the passing of time.883110Kent HER Number: TR 33 SW 26With finder2018-05-02T10:10:08Z2020-04-09T12:32:54Z173172315PAS5C5037EF001C03218210KentTR232951.017114981.17805502devoting.snowstorm.sobbing10MAS MASMASCopper alloy10627IncompletePoorNINETEENTH CENTURYMiddleLateNINETEENTH CENTURYDiving173_IMG_6351.jpg434images/MASPhil Trim2020-04-09T11:32:54.955Zfinds-172172MAS-F100172AIRCRAFT COMPONENTMODERNRolls Royce Merlin 45 gear unit, serial number GU 69 677, with a truncated, heavily damaged and corroded, three bladed propeller. All three propeller blades have survived despite heavy corrosion, though the end of one is missing. The wiring in the propeller cam shaft is visible since the outer dome casing has partially disintegrated. The Merlin 45 engine was used in the Mk. V Supermarine Spitfire fighters, in Reconnaissance Spitfires (PR Mk. IG & P MK. IV), and early versions of the naval version the Supermarine Seafire Mk. IB and Mk. IIC). The Merlin 45 saw active service from early 1941 as squadrons were equipped with the new Mk. V Spitfires.
Consultation with Boscombe Down Aviation Collection has suggested that this aircraft likely landed on the water, rather than crashed directly, as the damage to the propellor blades is minimal. Given that the nose of an aircraft is most likely where the initial impact of a crash would occur this would appear a more than probable conclusion. Additionally, following cleaning and initial preservation steps, it was noted that there are two circular scollops in the edge of one of the propellor blades (see image 13 of 13). Boscombe Down Aviation Collection suggest that these are of a diametre closely matching that of cannon shells that may have been fired at the Spitfire from a German aircraft such as a Messerschmitt BF 109E. This evidence suggests that the aircraft, to which this Gear unit belonged, was in combat shortly before its loss. The damaged sustained likely caused the engine to fail, causing the pilot to belly land the aircraft on the sea. It is to be hoped that he successfully exited the aircraft and was rescued following these events. Efforts to identify the exact aircraft from which this gear unit originated are being contiued by Boscombe Down AC.The Mk. V Spitfires were initially developed in late 1940 as a high altitude interceptor and were essentially remodelled Mk I & Mk II spitfires with a new engine, later Mk V's were purpose built airframes.
The PR Mk. IG (Armed) & P MK. IV (Unarmed) Spitfires were variants created to fulfil the role of photo- reconnaissance of enemy held territory. On some variants the planes had all their armament removed and often replaced with additional fuel tanks to increase their operational range. Their speed, small size and high operational ceiling allowed them to either remain undetected or avoid enemy aircraft. This role had previously been performed by light bombers, such as the Bristol Blenheim, or purpose built reconnaissance aircraft, such as the Westland Lysander. They are both relatively slow aircraft and the Lysander had no armament what so ever, as a result early war losses were high and an alternative solution was sought.
The Seafire was a naval version of the Spitfire, adapted for use on aircraft carriers, the first batch of which came into service in late 1941. The earlier variants being used for training to acquaint Fleet Air Arm pilots with the Spitfire air frame and using it on aircraft carriers. vehicle41411059/183MAS2018-04-27T00:00:00Zaircraft engineWith Boscombe Down Aviation Collection2018-04-27T09:07:05Z2020-03-27T15:30:26Z172124512414PAS5C5037EF001C032MAS MASMASSteel11786OtherIncompleteCorrodedMODERNMODERNFishing172_i0000010.jpg418images/MASPhil Trim2020-03-27T15:30:26.261Zfinds-169169MAS-O100169KNIFEPOST MEDIEVALDouble edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long.
Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and only appears to be blade like.Tools and equipment3641026/183MAS2017-10-15T00:00:00Zcutting equipmentWith finder2018-01-20T18:52:51Z2020-03-26T16:22:12Z16902527018275PAS5C50379B001E6C225469Isle of WightSZ428050.61820269-1.40768541blesses.recline.numeral10MAS MASMASIron11019IncompleteConcretedPOST MEDIEVALx41047MODERNx41047Coastal walking169_20180205_150952.jpg409images/MASRobbie Trevelyan2020-03-26T16:22:12.235Zfinds-133133MAS-D100133BOTTLESPOST MEDIEVALTwo clear glass fruit bottles, one ornate green glass wine bottle, one tall brown wine bottle with glass hexagonal base (94 stamped on base) and one black glass bottle.
The fruit bottles are 280 mm long and 70 mm wide. One appears to be more encrusted and discoloured than the other, but both are consistent in their shape. They possess straight bodies, abrubtly curving shoulders and straight necks running to applied finishes. One is still stoppered and contains what appears to be olives. Both are indicative of fruit bottles in style and shape.
The two wine bottles differ in appearance. The first is made from clear green and ornately decorated glass, with spiralling exhibitned from the shoulders and up the neck. It is 300 mm long and 60 mm wide, with straight sides and gradually sloping shoulders to a straight neck before a wine finish. The second bottle is cruder in appearance. The dark brown/black glass in encrusted with marine biofauna, and its shape is slightly warped to the left in the photograph. The sides are straight, but the shoulders are seemingly absent, as the entire 380 mm length of the bottle appears to slope right down to the finish. At its base '94' is stamped, which could mean it is dated from 1894 (1994 and 1794 unlikely for this style of bottle). Both bottles are still stoppered.
The final bottle has straight sides, very pronounced and acutely rounded shoulders, a slightly bulging neck and a ringed finish with cork still intact. The bottle is squat in profile, with a length of 230 mm and a width of 80 mm. This style is indicative of port bottles, and as such the bottle could contain liquor.These items were found with one stoneware salt glazed jar (MAS-D100132), three stoneware bottles (MAS-D100156) and part of a metal fork (MAS-D100134).Container39411894316/173MAS2017-10-18T00:00:00ZStorage container. Food and liquid storage containerWith finder2017-10-23T17:13:40Z2020-03-27T15:17:55Z13311814414115PAS5C50379B001E6C2MAS MASMASGlass10879Wood11988BlownCompleteFairNINETEENTH CENTURYMODERNx41047Diving156_IMG_3550Large.JPG357images/MASRobbie Trevelyan2020-03-27T15:17:55.406Z