2024-03-28T22:50:16+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results112120finds-111111MAS-F100111AIRCRAFT COMPONENTMODERNAluminium aircraft section, heavily corroded and damaged. No identifying marks or plates visible, though two cross member plate remnants present. 870 x 45mm.
The lack of identifying marks means that the type and origin of the aircraft cannot be definitively identified from this recovered section. Initially thought to be part of a piston engine support frame from something like a Spitfire fighter, a Dakota transport aircraft, or perhaps one of the multi-engined bombers,this theory was discarded as these are generally circular in section. The double row of rivet holes down one side (presumably where it attached to the skin) suggest it is more likely a stringer of some description. A stringer is a Longitudinal member (i.e. in the fuselage aligned with the longitudinal axis and in wings and tail surfaces perpendicular to this axis) which gives the airframe its shape and provides the support for the skin. In fuselages, they link frames and in aerofoils they link ribs. The consensus therefore, is that it is from the outer wing rib of a single engine aeroplane or the fin/tail plane rib of a larger multi engine aircraft from the Second World War; and has characteristics that suggest it is from a Royal Air Force or British aircraft. However, due to the corrosion and the very close variations in measurement between both metric and imperial measurements, i.e. millimetres (mm), standard wire gauge (swg) or thousands of an inch (thou), used by aircraft designers during this period, the use of the spacing and diameter of rivets, bolt holes and other spacings combined with any drilling/stamping errors means that these do not help in identifying the piece. The damage to the piece also means that the use of rivet pitch, which might identify the manufacturer, rather than the country of origin, would be open to a wide degree of error.TRANSPORT41411218/173MAS2017-08-23T00:00:00ZVehicle componentWith finder2017-08-23T08:47:41Z2018-05-23T13:59:19Z111458701272811422625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_201708174.JPG288images/MAS2018-05-23T12:59:19.121Zfinds-172172MAS-F100172AIRCRAFT COMPONENTMODERNRolls Royce Merlin 45 gear unit, serial number GU 69 677, with a truncated, heavily damaged and corroded, three bladed propeller. All three propeller blades have survived despite heavy corrosion, though the end of one is missing. The wiring in the propeller cam shaft is visible since the outer dome casing has partially disintegrated. The Merlin 45 engine was used in the Mk. V Supermarine Spitfire fighters, in Reconnaissance Spitfires (PR Mk. IG & P MK. IV), and early versions of the naval version the Supermarine Seafire Mk. IB and Mk. IIC). The Merlin 45 saw active service from early 1941 as squadrons were equipped with the new Mk. V Spitfires.
Consultation with Boscombe Down Aviation Collection has suggested that this aircraft likely landed on the water, rather than crashed directly, as the damage to the propellor blades is minimal. Given that the nose of an aircraft is most likely where the initial impact of a crash would occur this would appear a more than probable conclusion. Additionally, following cleaning and initial preservation steps, it was noted that there are two circular scollops in the edge of one of the propellor blades (see image 13 of 13). Boscombe Down Aviation Collection suggest that these are of a diametre closely matching that of cannon shells that may have been fired at the Spitfire from a German aircraft such as a Messerschmitt BF 109E. This evidence suggests that the aircraft, to which this Gear unit belonged, was in combat shortly before its loss. The damaged sustained likely caused the engine to fail, causing the pilot to belly land the aircraft on the sea. It is to be hoped that he successfully exited the aircraft and was rescued following these events. Efforts to identify the exact aircraft from which this gear unit originated are being contiued by Boscombe Down AC.The Mk. V Spitfires were initially developed in late 1940 as a high altitude interceptor and were essentially remodelled Mk I & Mk II spitfires with a new engine, later Mk V's were purpose built airframes.
The PR Mk. IG (Armed) & P MK. IV (Unarmed) Spitfires were variants created to fulfil the role of photo- reconnaissance of enemy held territory. On some variants the planes had all their armament removed and often replaced with additional fuel tanks to increase their operational range. Their speed, small size and high operational ceiling allowed them to either remain undetected or avoid enemy aircraft. This role had previously been performed by light bombers, such as the Bristol Blenheim, or purpose built reconnaissance aircraft, such as the Westland Lysander. They are both relatively slow aircraft and the Lysander had no armament what so ever, as a result early war losses were high and an alternative solution was sought.
The Seafire was a naval version of the Spitfire, adapted for use on aircraft carriers, the first batch of which came into service in late 1941. The earlier variants being used for training to acquaint Fleet Air Arm pilots with the Spitfire air frame and using it on aircraft carriers. vehicle41411059/183MAS2018-04-27T00:00:00Zaircraft engineWith Boscombe Down Aviation Collection2018-04-27T09:07:05Z2020-03-27T15:30:26Z172124512414PAS5C5037EF001C032MAS MASMASSteel11786OtherIncompleteCorrodedMODERNMODERNFishing172_i0000010.jpg418images/MASPhil Trim2020-03-27T15:30:26.261Zfinds-2929MAS-D100029AMPULLAMEDIEVALAn incomplete, flask shaped ampulla made of lead dating to the late Medieval period, around AD 1350 to 1500. These objects are believed to have been used to transport holy liquid from pilgrim sites. The ampulla, found in the River Wear, has a rounded body that extends upwards into the neck and diverges outwards towards the top. One handle on the side of the neck is intact and the remains of a second handle is visible on the other side of the neck. The obverse side of the ampulla is rounded and there are no visible decorations remaining. A relief decoration of a small equal-armed cross within a circle is visible under raking light on the reverse, flat side of the body of the object.These are normally associated with Christian cross symbology.Holy water bottles made of lead were often brought from pilgrimage places as a souvenir. There is some suggestion that they were used in agricultural blessing ceremonies with the contents sprinkled on the ground during prayers and then the ampulla discarded, alternatively they were buried with their contents (Anderson 2010,182-203).
The object is being conserved/researched at Durham University as part of the Durham River Wear Assemblage ProjectReligion or Ritual29293MAS2016-09-15T00:00:00ZReligous or Ritual ContainerB.3399Durham University2017-02-28T09:58:52Z2018-05-23T14:03:02Z64292256125282415243607County DurhamNZ274254.77219974-1.58182606humid.pages.putty10MAS MASMASLead Alloy11095IncompleteCorrodedMEDIEVALx14221MEDIEVALx14221x14221DivingSubmitted as wreck to the Receiver of WreckB3399.JPG90images/MAS2018-05-23T13:03:02.224Zfinds-5050MAS-D100050ARCHITECTURAL FRAGMENTPOST MEDIEVALA rough cut square marble tile with pink colouration and marine growth visible. The tile measures approximately 0.3 m in length. It has not been possible to provide furter identification at this time.This item was found along with a wooden belaying pin (MAS-D100032) and two pulley sheeves (MAS-D100049).ARCHITECTURE36391032/173MAS2017-03-14T00:00:00ZTILEWith finder2017-03-14T07:28:01Z2017-09-26T13:22:13Z501228215PAS57C96ECD001E82PAS57BC21F300115B2MAS MASMASStone11794IncompletePOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of WreckIMG_3921.JPG165images/MASABB2017-11-06T18:19:30.224Zfinds-234234MAS-O100234BARRELPOST MEDIEVALThis find comprises of the remains of three to four wooden barrels, which were buried in the intertidal sandy substrate of a pleasure beach. The action of the tide revealed the barrels and it is unclear how much of the barrels remain. End of the staves, lengths of timber making the sides of the barrel, are visible and clearly degraded. In some cases these give the appearance of flaring outwards, implying that only the lower portion of the barrel remains. At least one barrel exhibits inwardly projecting staves, suggesting more than half of the barrel remains. There is some evidence for the remains of posts protruding from the barrels which otherwise give the appearance of having been filled with sand and stone.
The term cask is also used to describe barrels specifically intended for the storage of liquid, most commonly alcohol such as wine and beer. It has not been possible at this stage to ascertain the exact size and type of the barrels comprising this find, though it is estimated that they are of a small to medium size such as a Rundlet or Tierce. What the barrels were originally used for is not readily discernible, though it does appear that they have been repurposed for another function. The presence of posts within the barrels and their relative positions, laid out in a rough rectangle, suggests they used to accommodate foundation posts of a possible structure. This may have been a simple platform for bathers or anglers or something more complex such as a temporary jetty or pontoon. An image, submitted by the finder, dating to the 1850s shows structures in approximately the same position as the barrels, which may indicate the structure previously supported by the barrels. Alternatively they may relate someway to the practicing for the D-Day Landings in Normandy, which incorporated the beach and construction of landing pontoons. It has not been possible to firmly date this find from the available data, but given their condition and the preservation of the timber elements a more recent, post-medieval, date is tentatively suggested.Barrels have been in use since at least the time of the Roman Republic, with evidence suggesting their use from 350 BC or earlier (https://www.riverdrive.co/history-of-barrels/ accessed March 2020). Their suitability as water tight containers meant that, until the 20th century, they were essential for the transport and storage of food stuffs, water and alcohol. The whiskey distilling industry still uses traditional oak barrels extensively in the ageing process. The term barrel itself is a general term and there are many different types of barrel, determined by size, such as a firkin (c. 30 litres) and a tun (c. 954 litres). Container21413MAS2018-09-27T00:00:00ZStorage container. Food and liquid storage containerSite2018-10-15T09:58:04Z2020-03-30T14:21:28Z23441482835PAS5C5037EF001C03250003DownNW653654.66413092-5.64553486soils.bike.luck10MAS MASMASWood11988Iron11019Hand madeIncompletePoorROMANx41218MODERNx41047Coastal walking234_20180927_192948.jpg604images/MASPhil Trim2020-03-30T13:21:28.39Zfinds-33MAS-1F5444BEADPOST MEDIEVALTwenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing the layers to be seen from the side.
These polychrome beads are of a type known as 'chevron' or 'rosetta' beads, which for several hundred years have been a speciality of the Venetian glassmakers. First appearing in the late 15th century, they were made from a short section of drawn-out hollow cane in a translucent greenish glass, coated with six further layers of white, translucent greenish, red and blue glass, and given a star-like cross-section by pressing in a 12-pointed corrugated mould; the canes were then cut into short lengths and the ends ground to expose the inner layers. Later beads may have fewer layers; they are still being made in Venice today, albeit in very small quantities. These beads can reach up to 90 mm in length and 60 mm in diameter, however the more common size is 20-30 mm in length and 10 mm in diameter.
In the UK, chevron beads usually belong to 16th or 17th century contexts, but they were also made in quantity for export to West Africa and the Americas, and the peak of production came during the 19th and early 20th centuries. These later beads were usually of four and six layers, in red, blue and white. Chevron beads are still highly valued in present-day West Africa, where they continue to be worn for prestige and ceremonial purposes, and are occasionally buried with the dead.These beads were recovered from the wreck of Loanda, along with three clay pipes recorded as MAS-100004. Built in 1891 at Barrow-in-Furness (Cumbria) by the Naval Construction and Armaments Co., Loanda was a two-masted screw-driven steamer owned by the British and African Steam Navigation Co. On 31 May 1908, following a collision with SS Junona, Loanda foundered while under tow 1 mile east of St Margaret's at Cliffe, Kent. At the time of loss, the vessel was bound from Hamburg, Germany, to West Africa with a general cargo. This cargo, which has seen significant recovery by divers, included: clay pipes; bottles of wine and gin; glass beads; perfume bottles; pencils, writing slates and inkpots; lamps; and teacups, lids, dishes, pots, saucers, plates, jugs and eggcups. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Loanda.Dress and personal accessories3641150019081196/163MAS2016-07-12T00:00:00ZJewellery901835Kent HER Number: TR 34 SE 108; TR 45 NE 256; TR 34 SE 112With finder2016-08-03T14:44:36Z2016-09-30T11:57:40ZPAS57A1F5440013D68252618284317115PAS57BC1B67001A23PAS57BC1E1600176F218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS-1FC389MAS MASMASGlass10879OtherDrawnCompleteFairPOST MEDIEVALx41047MODERNx41047DivingSubmitted as wreck to the Receiver of WreckP1050090.JPG2images/MASMF2017-11-06T18:25:22.053Zfinds-109109MAS-F100109BOATMODERNThis find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth.
Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.TRANSPORT41411219/173MAS2017-08-23T00:00:00ZWATER CRAFTWith finder2017-08-23T08:40:58Z2018-05-08T08:40:03Z109524094012728114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081726.JPG277images/MASABB2018-05-08T07:40:03.024Zfinds-7171MAS-D100071BOTTLENINETEENTH CENTURYThree aqua coloured glass bottles with tooled lips; for foodstuffs or other household goods; probably dating to the 19th century.
These bottles have a double ring also known as a double collar, double bead, double lip, Davis-type, stacked ring, bead lip with a ring, round band lower flared, broad round collar with lower bevel, inverted double ring, citrate of magnesia finish, double roll collar and stacked ring. This two-part finish is composed of two connected 'rings' - usually with a thicker and slightly wider variably rounded ring at the top of the finish with a thinner and narrower variably rounded to flat ring below. Other variations can have either or both rings somewhat or totally flattened on outside, which is similar to the three bottles recorded here.
This popular finish was used on many different bottle types but was most common on a wide array of medicines, many varieties of liquor flasks and various sauces. Between about 1840 and the 1920s, and particularly between 1850 and 1910, this style of finish was one of the most popular and functional finishes used. It can be found on both mouth-blown and machine-made bottles. The lips or double ring on the bottle seem to be a tooled lip which means the lip was formed in the mould itself rather than applied to the bottle separately. The popularity of this finish was probably a combination of corking strength and relative ease of manufacturing (Society for Historical Archaeology webpage, accessed September 2017).These items were found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39391173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:45:41Z71318284915PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASGlass10879MouldedCompleteNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG10images/MASLR2017-11-06T18:17:47.683Zfinds-7272MAS-D100072BOTTLENINETEENTH CENTURYOne Hamilton bottle also known as a torpedo or egg bottle. These bottles are named after their English inventor, William Francis Hamilton who took out a patent in 1809 for a method of bottling soda and other mineral waters, involving ovate bottles (although use of ovate bottle probably pre-dated his patent by at least 20 years). These bottles became common in the 1840s when the manufacturing of mineral water became very popular. Before this date, carbonated water was only sold on a small scale. The bottle was invented as a way of keeping the gas in fizzy drinks. The pointed base meant that the cork or stopper was always airtight as it was always wet and swollen due to being laid on its side (Dale 2012). A Swiss chemist, Jacob Schwepper, set up a chemist's shop in London and was selling the newly invited artificial fizzy spring water known as aerated water in the early years of the 19th century, and was an early user of the Hamilton bottles to keep in schweppervescence. However, bottles with a pointed base were difficult to transport and could not be stood upright (Dale 2012). Common use of ovate bottles runs from the 1830s through to the end of the century. This item was found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), 3 aqua glass bottles (MAS-D100071), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39391173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:54:23Z7211828415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASGlass10879CompleteNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG200images/MASLR2017-11-06T18:17:43.951Zfinds-6565MAS-D100065BOTTLENINETEENTH CENTURYSix stoneware seltzer bottles, of a type used to carry mineral water from various Continental (mainly German) spas. The term 'seltzer' takes its name from the town of Selters in the lower Rhineland, one of the original producers of effervescent mineral waters. This cylindrical bottle type was used from the early 19th century through to the First World War. These types of bottles were produced by the specialist potters known as Krugbacker, or pot bakers, in the Westerwald region of Germany. These bottles, which changed little throughout the 19th century, were slender and cylindrical and colored reddish brown with straight, vertical sides. Bottles were stamped with marks indicating the bottling company, the jug baker's mark, the well number from which they were filled, and the town from which they were shipped (NMSC Archaeology & Museum Blog webpage, accessed September 2017).These items were found with four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:46:02Z6565284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG181images/MASLR2017-11-06T18:18:24.986Zfinds-6666MAS-D100066BOTTLENINETEENTH CENTURYFour stoneware bottles (three large and one smaller) that were probably used for beer, ale, stout or porter.
Stoneware bottles provided the ultimate in protection from the detrimental effects of light but were very heavy. They were produced in Britain in the 1800s and many bottles found in the United States were even imported from here.
All of these bottles have a feldspathic glaze over an ochre dip on the upper parts of the bottle giving them a darker colour on top. Feldspars (natural rocks of aluminosilicates) are used in stoneware and porcelain glazes because they fuse only at high temperatures. The feldspathic glaze dates the bottles to the 1830s or later while stoneware bottles were more or less superseded by glass by the first decade of the 20th century. These items were found with six stoneware seltzer bottles (MAS-D100065), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and an egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:46:18Z6645284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteGoodNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG182images/MASLR2017-11-06T18:18:21.703Zfinds-3838MAS-D100038BOTTLEPOST MEDIEVALFour glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - these examples therefore probably date to the 19th century, but pre-dating the 1880s.This item was found along with an ivy leaf teacup (MAS-D100051).FOOD AND DRINK SERVING CONTAINER36391090/173MAS2017-05-21T00:00:00ZWINE BOTTLEWith finder2017-05-21T14:02:28Z2017-09-26T13:13:09Z38418284115PAS57C96ECD001E82PAS57BC21F300115B218210KentTR233651.079963081.18236287petty.jetting.hazy10MAS MASMASGlass10879CompleteFairPOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck38_az9rlbhpze9s.jpg131images/MASABB2017-11-06T18:20:15.54Zfinds-4040MAS-D100040BOTTLEPOST MEDIEVALOne onion bottle dated to c.1700.
Glass onion bottles were large hand-blown glass bottles, used aboard sailing ships to hold wine or brandy. For increased stability on rough seas, the bottles were fashioned with a wide-bottom shape to prevent toppling. Between c.1690 and c.1720 the outline of a wine bottle resembled an onion - a wide compressed globular body and a short neck (Robinson and Harding 2015). Most bottles before 1700 had a ring of glass just below the neck that gave anchorage to the string used to hold in variety of stoppers. The Dutch bottles usually had a longer neck than the English ones and featured a flat wraparound rim, while the English bottlenecks had an applied collar or laid on ring (Polak 2016).This item was found along with a large round jug (MAS-D100052) and were recovered from the Goodwin Sands, Kent.Container36361091/173MAS2017-05-23T00:00:00ZFood and liquid storage containerWith finder2017-05-23T19:42:07Z2017-10-04T09:49:26Z401182841415PAS5989C577001EA7PAS57BC21F300115B2MAS MASMASGlass10879BlownCompletePOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of Wreck40_IMG_02.jpg137images/MASLR2017-11-06T18:20:06.692Zfinds-8282MAS-D100082BOTTLENINETEENTH CENTURYA collection of four stoneware ginger beer bottles covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. These bottles relate to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectibles, accessed November 2017). These stoneware ginger beer bottles were produced in Britain by the Doulton Lambeth Company. 'VI' stood for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).These items were found with a collection of five other bottles (MAS-D100100).CONTAINER393913MAS2017-08-01T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:38:35Z2017-12-06T12:53:48Z827645284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR353551.06620131.35272976recharges.vehicles.unmarked10MAS MASMASCeramic10539CompleteGoodNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of WreckIMG_2179.JPG202images/MASLR2017-12-06T12:53:48.966Zfinds-8484MAS-D100084BOTTLENINETEENTH CENTURYThree cylindrical glass bottles. The two larger bottles are full size wine bottles. One is of the 'Burgundy' type and is most likely Continental. The half-size wine bottle, originally thought to be a champagne bottle, also has a Continental style neck. The Continental style neck appears around the middle of the 19th century (Dumbrell 1983). All are of nineteenth or twentieth century type.These bottles were found with two green glass gin bottles (MAS-D100101), seven clay pipes (MAS-D100085) and the lid of a ceramic serving dish (MAS-D100087).CONTAINER394113MAS2017-08-06T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:45:35Z2017-12-06T12:54:12Z8476318284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS MASMASGlass10879CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of Wreck84_Picture1.jpg386images/MASLR2017-12-06T12:54:12.225Zfinds-5353MAS-O100053BOTTLEPOST MEDIEVALOne gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - this examples therefore probably date to the 19th century, but pre-dating the 1880s.This item was found along with three candlesticks (MAS-D100039 and MAS-D100041). All of these items were recovered from the wreck of Josephine Willis, a New Zealand sail and steam propelled packet ship built in c.1840. The ship was carrying 110 people on board bound for Auckland, comprising ten First class passengers, 60 steerage and 40 crew. It sank in 1856 following a collision with Mangerton with the loss of 69 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Josephine Willis.Container3939180018561092/173MAS2017-05-28T00:00:00ZDRINK SERVING CONTAINER1025695Kent HER Number: TR 22 NE 45With finder2017-05-29T08:46:26Z2018-03-19T20:02:58Z531182815PAS57C96ECD001E82PAS57BC21F300115B218210KentTR183051.02800971.10748152immature.twang.uncouth10MAS MASMASGlass10879NINETEENTH CENTURYNINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck41_f3yhwrzgu1vk.jpg185images/MASABB2018-03-19T20:02:58.842Zfinds-103103MAS-F100103BOTTLEMODERNThis flat-based Hamilton, or 'torpedo' bottle stands 240 mm high, with a 64-mm wide base and is approximately 90 mm wide at the waist. It has a 'bottle logo' embossed on its base. There are possibly other text/numerals that have since worn away. The bottle shows moulding scars on the base and sides. It has a crown top finish.
The egg-shaped bottle was first patented by William Francis Hamilton in 1814, the idea being that the bottle had to be stored on its side to keep the cork wet and ensuring a good seal on the reusable bottle. In around 1870, the flat based egg or Hamilton bottle was introduced. Following the 'blob top' finish being replaced by the crown top and cork sometime after 1892, when this cap design was patented, the design became more popular. This was because the bottles could now be reliably stored upright without cork shrinkage and a leaky seal causing loss of the carbonated gas. This is recognisable on this bottle by the beaded rim that the metal cap fitted over. These are also generally c.25mm in diameter. The cap would have been metal with a cork lining. This, however, lead to the decline in the popularity of torpedo bottles as it made them no longer necessary (Lucas, 2010).
The mould scar travels up the neck to the lip of the bottle and this would suggest that it was manufactured around 1910 on a semi or fully automated bottle making machine, near to the end of their popularity. The 'bottle logo' on the base is probably the manufactures logo, however, several manufacturers used the same logo as their mark and therefore it has not now been possible to isolate its exact point of manufacture. The bottles were extensively exported from the U.K. and are therefore found around the world, but particularly in the former colonies and North America.BOTTLE41413MAS2017-08-23T00:00:00ZFood and liquid storage containerWith finder2017-08-23T08:15:00Z2018-05-23T14:00:10Z24010390118284911422625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASGlass10879MouldedCompleteFairMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081795.JPG241images/MAS2018-05-23T13:00:10.772Zfinds-100100MAS-D100100BOTTLENINETEENTH CENTURYA collection of five bottles comprising two full-size glass bottles, one squat cylindrical glass bottle, one small clear bottle, and one stoneware bottle. All the bottles are believed to be of nineteenth and twentieth century type, although it is difficult to date all but the stoneware bottle.
The two full-size glass bottles are thought to be either wine or beer bottles. If the bottles have kicked bases, it would indicate a wine bottle, while a flat base would indicate a beer bottle.
The squat cylindrical glass bottle was thought to be a port bottle, however if the base is flat, this could also be another example of a beer bottle.
The small clear bottle with a long narrow neck is thought to have been used for foodstuffs, possibly a condiment of some sort.
The ginger beer stoneware bottle is covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. This bottle relates to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectables, accessed November 2017). This stoneware ginger beer bottle was produced in Britain by the Doulton Lambeth Company. 'VI' stands for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).These items were found with four stoneware ginger beer bottles (MAS-D100082).CONTAINER39411201/173MAS2017-08-01T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:38:35Z2018-05-22T15:47:59Z10076518284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR353551.06620131.35272976recharges.vehicles.unmarked10MAS MASMASGlass10879CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_2178.JPG201images/MASLR2018-05-22T14:47:59.413Zfinds-101101MAS-D100101BOTTLENINETEENTH CENTURYTwo case gin bottles.
Some of the earliest liquor bottles were square in cross section and generally designed to contain gin though undoubtedly contained various types of liquor and possibly wine. Commonly called 'case gin' or 'taper gin' bottles since they would pack more efficiently in a case (6 to 24 bottles) than round bottles. Case gin bottles are square with a distinct taper inwards from the shoulder to the base. The neck is very short to almost non-existent with the finishes varying from a laid-on ring, flared, mineral finish, oil, and even a blob. This shape and style of bottle originated in, and was commonly made in, Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later (Historic Glass Bottle Identification & Information Website, accessed November 2017), and may therefore be earlier 19th century.This items was found with three cylindrical glass bottles (MAS-D100084), seven clay pipes (MAS-D100085) and the lid of a ceramic serving dish (MAS-D100087).CONTAINER39391200/173MAS2017-08-06T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:45:35Z2018-05-22T15:48:20Z10151218284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS MASMASGlass10879CompleteGoodNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of Wreck101_Picture2.jpg387images/MASLR2018-05-22T14:48:20.248Zfinds-199199MAS-D100199BOTTLENINETEENTH CENTURYThis find is a small medicine style bottle in green glass. No scale was provided but these vessels are usually 160 - 190 mm in overall height. The vessel is flat bottomed with a rectangular shape in plan, with the short sides being rounded. it has a short but wide neck ending in a bead type finish, common to medicine bottles. Embossed on the shoulders of the vessel is the word KEPLER, which refers to the product which it contained. The base is embossed with SNOW HILL, B. W. & Co, LONDON, which refers to the manufacturer and their factory in London. The condition of the vessel is good though the cap or stopper is missing along with a paper label that was common to these vessels.
This vessel is a product of Burroughs Wellcome & Company, a London based pharmaceutical company established in 1880 by two American pharmicists. The company continued to trade until 1994, when it merged with Glaxo in turn becoming the modern pharmaceutical conglomerate GlaxoSmithKline. Snow Hill, London, was the company's first business premises which they continued to operate from until it was destroyed during the Blitz. By 1900 their product range included a trademarked product known as Kepler, which this bottle would have contained. This was a dietary supplement of cod liver oil and malt extract, containing vitamins A and D and with added calcium and potassium salts (www.gracesguide.co.uk accessed 2019).Recovered from Unknown Wreck, one mile off The Warren.Container393918801133/183MAS2018-06-21T00:00:00ZMedicine BottleN/AWith Finder2018-07-04T09:32:50Z2020-02-19T13:44:25Z199118214115PAS5C5037EF001C032MAS MASMASGlass10879BlownIncompleteFairNINETEENTH CENTURYNINETEENTH CENTURYDiving199_IMG_6710.JPG511images/MASPhil Trim2020-02-19T13:44:25.994Z