2024-03-28T12:42:50+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results112420finds-111111MAS-F100111AIRCRAFT COMPONENTMODERNAluminium aircraft section, heavily corroded and damaged. No identifying marks or plates visible, though two cross member plate remnants present. 870 x 45mm.
The lack of identifying marks means that the type and origin of the aircraft cannot be definitively identified from this recovered section. Initially thought to be part of a piston engine support frame from something like a Spitfire fighter, a Dakota transport aircraft, or perhaps one of the multi-engined bombers,this theory was discarded as these are generally circular in section. The double row of rivet holes down one side (presumably where it attached to the skin) suggest it is more likely a stringer of some description. A stringer is a Longitudinal member (i.e. in the fuselage aligned with the longitudinal axis and in wings and tail surfaces perpendicular to this axis) which gives the airframe its shape and provides the support for the skin. In fuselages, they link frames and in aerofoils they link ribs. The consensus therefore, is that it is from the outer wing rib of a single engine aeroplane or the fin/tail plane rib of a larger multi engine aircraft from the Second World War; and has characteristics that suggest it is from a Royal Air Force or British aircraft. However, due to the corrosion and the very close variations in measurement between both metric and imperial measurements, i.e. millimetres (mm), standard wire gauge (swg) or thousands of an inch (thou), used by aircraft designers during this period, the use of the spacing and diameter of rivets, bolt holes and other spacings combined with any drilling/stamping errors means that these do not help in identifying the piece. The damage to the piece also means that the use of rivet pitch, which might identify the manufacturer, rather than the country of origin, would be open to a wide degree of error.TRANSPORT41411218/173MAS2017-08-23T00:00:00ZVehicle componentWith finder2017-08-23T08:47:41Z2018-05-23T13:59:19Z111458701272811422625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_201708174.JPG288images/MAS2018-05-23T12:59:19.121Zfinds-107107MAS-F100107TRANSPORTPOST MEDIEVALThis ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor.
The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee.
The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.SHIP36411224/173MAS2017-08-23T00:00:00ZTimberWith finder2017-08-23T08:34:54Z2018-05-23T13:57:54Z10711012083011428114PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081739.JPG262images/MASABB2018-05-23T12:57:54.253Zfinds-101101MAS-D100101BOTTLENINETEENTH CENTURYTwo case gin bottles.
Some of the earliest liquor bottles were square in cross section and generally designed to contain gin though undoubtedly contained various types of liquor and possibly wine. Commonly called 'case gin' or 'taper gin' bottles since they would pack more efficiently in a case (6 to 24 bottles) than round bottles. Case gin bottles are square with a distinct taper inwards from the shoulder to the base. The neck is very short to almost non-existent with the finishes varying from a laid-on ring, flared, mineral finish, oil, and even a blob. This shape and style of bottle originated in, and was commonly made in, Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later (Historic Glass Bottle Identification & Information Website, accessed November 2017), and may therefore be earlier 19th century.This items was found with three cylindrical glass bottles (MAS-D100084), seven clay pipes (MAS-D100085) and the lid of a ceramic serving dish (MAS-D100087).CONTAINER39391200/173MAS2017-08-06T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:45:35Z2018-05-22T15:48:20Z10151218284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS MASMASGlass10879CompleteGoodNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of Wreck101_Picture2.jpg387images/MASLR2018-05-22T14:48:20.248Zfinds-100100MAS-D100100BOTTLENINETEENTH CENTURYA collection of five bottles comprising two full-size glass bottles, one squat cylindrical glass bottle, one small clear bottle, and one stoneware bottle. All the bottles are believed to be of nineteenth and twentieth century type, although it is difficult to date all but the stoneware bottle.
The two full-size glass bottles are thought to be either wine or beer bottles. If the bottles have kicked bases, it would indicate a wine bottle, while a flat base would indicate a beer bottle.
The squat cylindrical glass bottle was thought to be a port bottle, however if the base is flat, this could also be another example of a beer bottle.
The small clear bottle with a long narrow neck is thought to have been used for foodstuffs, possibly a condiment of some sort.
The ginger beer stoneware bottle is covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. This bottle relates to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectables, accessed November 2017). This stoneware ginger beer bottle was produced in Britain by the Doulton Lambeth Company. 'VI' stands for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).These items were found with four stoneware ginger beer bottles (MAS-D100082).CONTAINER39411201/173MAS2017-08-01T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:38:35Z2018-05-22T15:47:59Z10076518284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR353551.06620131.35272976recharges.vehicles.unmarked10MAS MASMASGlass10879CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_2178.JPG201images/MASLR2018-05-22T14:47:59.413Zfinds-105105MAS-F100105STRUCTURAL TIMBERNINETEENTH CENTURYThese two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.ARCHITECTURE39411223/173MAS2017-08-23T00:00:00ZARCHITECTURAL FRAGMENTWith finder2017-08-23T08:21:58Z2018-05-22T15:29:55Z10521428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081780.JPG251images/MASABB2018-05-22T14:29:55.334Zfinds-2626MAS-O100026SHIPS TIMBERNINETEENTH CENTURYTwo fragments of waterlogged wood with two copper fasteners dating from the post-medieval period onwards.
The wood may be the remains of two planks of wood used in the construction of a ship as the planks are secured with one copper fastening and a hole is visible where another fastening may have also been used. Copper rivets are the standard method of fastening the planks to each other in clinker constructed vessels, or in the planks to the ribs or frames (Traditional Maritime Skills website, accessed September 2017). Clinker is a method of constructing the hull of a boat by fixing wooden planks so that the planks overlap along their edges. The overlapping joint is called a land. If the plank is too short for the hull, it would be necessary to extend the plank by joining with another piece of wood. Planks are also known as strakes (rubbing strake for example) so this method is also known as lapstrake. It is a very traditional method of ship construction.
Metallic fastenings followed on from tree nails (also commonly known as trunnels and trennels), which were an older method of securing two planks together using wooden 'nails'.TRANSPORT36411008/173MAS2017-01-28T00:00:00ZVESSEL COMPONENTWith finder2017-01-28T22:05:37Z2018-05-22T15:29:15Z262142815PAS5989C577001EA7PAS5989C577001EA7222028North YorkshireNZ672154.57977665-0.96494213trek.amazed.stated10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNCoastal walkingSubmitted as wreck to the Receiver of WreckIMG_0877.JPG83images/MASLR2018-05-22T14:29:15.772Zfinds-104104MAS-F100104SHELL CASESMODERNThe shell case measures 660 mm long and is 152 mm in diameter at the base, and 116 mm in diameter at the neck though this has been buckled and stretched. The shell case appears to have been either constructed without a base, or it has been removed at some point in the past. The diameter of the neck and its overall size point to it being a 4.5-inch or possibly a 4.7-inch shell case. Without the base with the details of type, manufacturer and date of manufacture, the history and origin of this case is not clear. It would have been part of a fixed round, i.e. the shell was attached to the shell case like a large rifle round. The maximum weight of these rounds was around 36 kg (80 lbs), which was the weight considered to be sustainable for loading manually loaded fixed ammunition. The 4.5-inch gun has been the standard medium-gun calibre of the Royal Navy for use against surface, aircraft and shore targets since 1938, and in the case of the 4.7-inch gun since 1916.
The history of this shell case is unknown, however, based on the damage it has sustained and the degree of corrosion, it appears that the shell was pried out of it and the base cut off with a lathe at some point in the past, before the remainder was lost or discarded. ARMOUR AND WEAPONS41411221/173MAS2017-08-23T00:00:00ZAMMUNITIONWith finder2017-08-23T08:19:22Z2018-05-08T08:41:12Z104152660150282114PAS57C96ECD001E82PAS59C90C510011A322625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASYellow metalIncompleteFairMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081783.JPG246images/MASABB2018-05-08T07:41:12.137Zfinds-106106MAS-F100106LADDERNINETEENTH CENTURYThese two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut.
Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.Tools and equipment39411222/173MAS2017-08-23T00:00:00ZCompanion ladderWith finder2017-08-23T08:31:10Z2018-05-08T08:40:53Z10621428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081767.JPG254images/MASABB2018-05-08T07:40:53.678Zfinds-108108MAS-F100108PORTHOLEMODERNThis object is the remains of a brass porthole ring measuring 250 mm across with a brass rim 28 mm wide. It is thought that this frame would have been on the outside of the hull of the vessel while an internal frame on the inside of the vessel would have contained the glass element and a hinged deadlight (a metal plate that was both a curtain and a reinforcement against heavy seas).
Portholes have been used for centuries to allow light and ventilation to enter the lower, darker levels of vessels and in some early cases, as a means of seeing out of a submersible. Portholes are watertight and are generally crafted from glass, secured within a metal frame that is then bolted to the vessel. The popular metals that are used to create the frame of the portholes are bronze and brass because these metals corrode less in saltwater.Fixtures and Fittings41411225/173MAS2017-08-23T00:00:00ZPortholeWith finder2017-08-23T08:38:12Z2018-05-08T08:40:10Z10825032815028214PAS57C96ECD001E82PAS5A27DDB80016AC22625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASYellow metalIncompleteMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081732.JPG272images/MASABB2018-05-08T07:40:10.128Zfinds-109109MAS-F100109BOATMODERNThis find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth.
Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.TRANSPORT41411219/173MAS2017-08-23T00:00:00ZWATER CRAFTWith finder2017-08-23T08:40:58Z2018-05-08T08:40:03Z109524094012728114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081726.JPG277images/MASABB2018-05-08T07:40:03.024Zfinds-110110MAS-F100110POSTPOST MEDIEVALHeavily eroded and abraded timber fragment with marine borer and growth present. As it is so worn, it is difficult to tell what type of wood it is and whether this fragment was originally completely shaped and worked, or just partially worked to achieve its function. The timber does not exhibit any evidence or staining from fastenings, however, there is one hole that could have been a fastening point at some stage.
It is thought that this fragment may be a broken post or groyne timber that has come from a beach rather than material relating to a wreck. Groynes are wooden barriers built at right angles to a beach to prevent the movement of material along the coast caused by longshore drift. They can be subjected to storm damage which results in them being broken and drifting out to sea. The possibility that this piece of wood derives from a vessel should not be ruled out, however. Shipwrecks represent an important part of our marine historic landscape and are important in understanding some of the most fundamental aspects relating to human past and experience.ARCHITECTURE36411220/173MAS2017-08-23T00:00:00ZARCHITECTURAL ELEMENTWith finder2017-08-23T08:45:04Z2018-05-08T08:39:55Z110180720114281314PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPoorPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081719.JPG284images/MASABB2018-05-08T07:39:55.115Zfinds-5353MAS-O100053BOTTLEPOST MEDIEVALOne gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - this examples therefore probably date to the 19th century, but pre-dating the 1880s.This item was found along with three candlesticks (MAS-D100039 and MAS-D100041). All of these items were recovered from the wreck of Josephine Willis, a New Zealand sail and steam propelled packet ship built in c.1840. The ship was carrying 110 people on board bound for Auckland, comprising ten First class passengers, 60 steerage and 40 crew. It sank in 1856 following a collision with Mangerton with the loss of 69 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Josephine Willis.Container3939180018561092/173MAS2017-05-28T00:00:00ZDRINK SERVING CONTAINER1025695Kent HER Number: TR 22 NE 45With finder2017-05-29T08:46:26Z2018-03-19T20:02:58Z531182815PAS57C96ECD001E82PAS57BC21F300115B218210KentTR183051.02800971.10748152immature.twang.uncouth10MAS MASMASGlass10879NINETEENTH CENTURYNINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck41_f3yhwrzgu1vk.jpg185images/MASABB2018-03-19T20:02:58.842Zfinds-8585MAS-D100085CLAY PIPE (SMOKING)NINETEENTH CENTURYA selection of seven clay pipes.
Two of the pipes are of 'Irish' type (Atkinson and Oswald 1969, type 31, dated post-1840), with spurs and milled bowl rims, and the remaining five are of a spur-less form copying the briar pipe (ibid., type 30, dated c. 1850-1910). All of the clay pipes are 'cutty' (short) pipes. The spur-less examples are all stamped with the mark 'H B W Russell Co.'. This appears to be the mark of an agent or retailer rather than the pipe manufacturer (as is more usual). H. B. W. Russell may have a connection with Liverpool - pipes stamped 'HBW Russell of Liverpool' have been found in Ghana (Basford 2012), but the company also had a base in Cape Town (Micots 2010).These items were found with three cylindrical glass bottles (MAS-D100084), the lid of a ceramic serving dish MAS-D100087) and two green glass gin bottles (MAS-D100101). DRESS AND PERSONAL ACCESSORIES394113MAS2017-08-06T00:00:00ZPIPE (SMOKING)With finder2017-08-11T10:45:35Z2017-12-07T16:38:35Z8513075284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS MASMASCeramic10539CompleteGoodNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_2279.JPG205images/MASLR2017-12-07T16:38:35.418Zfinds-8787MAS-D100087DOMED LIDNINETEENTH CENTURYOne ceramic serving dish lid made of a refined whiteware with transfer-printed design in red.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c. 1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate).This item was found with three cylindrical glass bottles (MAS-D100084), seven clay pipes (MAS-D100085) and two green glass gin bottles (MAS-D100101). UNASSIGNED394113MAS2017-08-06T00:00:00ZLIDWith finder2017-08-11T10:45:35Z2017-12-06T12:54:31Z8720515284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS MASMASCeramic10539CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_2279.JPG237images/MASLR2017-12-06T12:54:31.628Zfinds-8484MAS-D100084BOTTLENINETEENTH CENTURYThree cylindrical glass bottles. The two larger bottles are full size wine bottles. One is of the 'Burgundy' type and is most likely Continental. The half-size wine bottle, originally thought to be a champagne bottle, also has a Continental style neck. The Continental style neck appears around the middle of the 19th century (Dumbrell 1983). All are of nineteenth or twentieth century type.These bottles were found with two green glass gin bottles (MAS-D100101), seven clay pipes (MAS-D100085) and the lid of a ceramic serving dish (MAS-D100087).CONTAINER394113MAS2017-08-06T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:45:35Z2017-12-06T12:54:12Z8476318284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS MASMASGlass10879CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of Wreck84_Picture1.jpg386images/MASLR2017-12-06T12:54:12.225Zfinds-8282MAS-D100082BOTTLENINETEENTH CENTURYA collection of four stoneware ginger beer bottles covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. These bottles relate to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectibles, accessed November 2017). These stoneware ginger beer bottles were produced in Britain by the Doulton Lambeth Company. 'VI' stood for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).These items were found with a collection of five other bottles (MAS-D100100).CONTAINER393913MAS2017-08-01T00:00:00ZFOOD AND LIQUID STORAGE CONTAINERWith finder2017-08-11T10:38:35Z2017-12-06T12:53:48Z827645284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR353551.06620131.35272976recharges.vehicles.unmarked10MAS MASMASCeramic10539CompleteGoodNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of WreckIMG_2179.JPG202images/MASLR2017-12-06T12:53:48.966Zfinds-7474MAS-D100074INK BOTTLENINETEENTH CENTURYA collection of four ink bottles; one large and three small.
The larger stoneware ink bottle displays a pourer on the rim and is glazed with a feldspathic glaze. This type of ink bottle was introduced in the 1860s and were superseded by glass bottles by the first decade of the 20th century. Cylindrical stoneware ink bottles were made in England in large quantities throughout the Victorian era. The bottles varied widely in size and were not all brown. The larger or master bottles with a pouring lip brown bottles were commonly used for ink. The pouring spout would be used to distribute the ink in to smaller wells (Hume 2001).
Of the three smaller stoneware ink bottles, two are glazed with a feldspathic glaze. This type of ink bottle was introduced in the mid-19th century and were superseded by glass bottles by the first decade of the 20th century. Small ink bottles or wells were usually no more than four inches high and did not have a pouring spout like the master bottles as they were intended to be dipped into (Hume 2001). These ink bottles came in two main varieties; very squat cinders or wide-based cones.These items were found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), six small bowls (MAS-D100076) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Written communications39411173/173MAS2017-07-24T00:00:00ZWriting and drawing equipment813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-11-21T14:09:49Z744528415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG233images/MASLR2017-11-21T14:09:49.202Zfinds-7676MAS-D100076ROUNDED BOWLNINETEENTH CENTURYSix small convex bowls that may have also functioned as cups or tea bowls. All the bowls are made of a refined whiteware and three of them display a hand painted decoration.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily, white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is thought that these examples may be tea wares dating to the 19th or 20th century.These items were found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZBowl813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T16:13:21Z766528415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG234images/MASLR2017-11-06T18:17:23.969Zfinds-7272MAS-D100072BOTTLENINETEENTH CENTURYOne Hamilton bottle also known as a torpedo or egg bottle. These bottles are named after their English inventor, William Francis Hamilton who took out a patent in 1809 for a method of bottling soda and other mineral waters, involving ovate bottles (although use of ovate bottle probably pre-dated his patent by at least 20 years). These bottles became common in the 1840s when the manufacturing of mineral water became very popular. Before this date, carbonated water was only sold on a small scale. The bottle was invented as a way of keeping the gas in fizzy drinks. The pointed base meant that the cork or stopper was always airtight as it was always wet and swollen due to being laid on its side (Dale 2012). A Swiss chemist, Jacob Schwepper, set up a chemist's shop in London and was selling the newly invited artificial fizzy spring water known as aerated water in the early years of the 19th century, and was an early user of the Hamilton bottles to keep in schweppervescence. However, bottles with a pointed base were difficult to transport and could not be stood upright (Dale 2012). Common use of ovate bottles runs from the 1830s through to the end of the century. This item was found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), 3 aqua glass bottles (MAS-D100071), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39391173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:54:23Z7211828415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASGlass10879CompleteNINETEENTH CENTURYNINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG200images/MASLR2017-11-06T18:17:43.951Zfinds-6868MAS-D100068WINE BOTTLENINETEENTH CENTURYTwo green glass wine bottles that appear to have the flat band-like collar around the rim which is typical of Continental (particularly French) wine bottles; the type appeared around the middle of the 19th century. This particular shape was - and still is - referred to as a 'hock' or Rhine wine and was one of the three dominant styles of wine bottles that bridge the time from at least the mid-19th century to the present day.
Hock wine bottles are of German or French origin and during the 19th century, typically contained both red and white Rhine and Mosel wines. The distinctive shape of these bottles is typified by being tall and slender with no sharp break where the body merges into the shoulder and the shoulder becomes the neck. They were typically free-blown or dip moulded, often exhibiting pontil scars where the glass was broken away from the rod. Hock wine bottles from the 19th and early 20th centuries are most often seen in shades of olive green or amber, but were produced commonly in a wide array of other colours (Society for Historical Archaeology webpage, accessed Sept 2017).These items were found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066),three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and an egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZBottle813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:47:13Z682182841415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASGlass10879BlownCompleteNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG1images/MASLR2017-11-06T18:18:14.453Z