Record ID: MAS-D100193
Object type: ENGINE
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100192
Object type: PERSONAL ACCESSORY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One gold T piece to believe part of a watch chain. These pieces were used to fasten the watch chain to an item of clothing, most often a wasitcoat. The T piece has a rounded embossing in the centre of the strip, with a small ring attached at this point for attaching the piece to a chain. The right end of the piece has a single ringed pattern shortly before terminating in a straight clean end. The left side of the piece has steps from the thicker piece to a thinner section extruding out a short distance. Given the date of sinking of the vessel from which it was recovered this item can r…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100191
Object type: COIN
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find comprises of a single gold coin from the USA with a value of $10. This 1847 minted coin was created for standard circulation and measures 27 mm in diameter with a weight of 16.72 grammes, the coin is minted in an alloy of 90% gold and 10% copper. It is of a type known as a Coronet Head - Eagle, based on the depictions on each face. The head side shows a side profile of lady liberty wearing a coront inscribed with the word "LIBERTY", the obverse bearing a spread eagle with a crest upon it and the words "UNITED STATES OF AMERICA TEN D." inscribed around the circumference of the…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100190
Object type: CONTAINERS
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Published
This find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and t…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-O100189
Object type: NAIL
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Published
The find consists of 8 iron nails and an unidentifiable object that contains one further nail and is made of, or covered in, what appears to be fur. The nails range in length from 135 - 175 mm, and c. 10 - 20 mm in width at their widest point below the head. All 8 nails have a rose type head and taper to a broad point. These features suggest that the nails were hand wrought, rather than cut or wire, a method where each nail is manufactured individually by hand on a blacksmiths anvil. The invention of the slitting mill c. 1590 simplified this process by manufacturing iron rods from whi…
Created on: Wednesday 13th June 2018
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-D100181
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Find consists of two sections of timber or wood. The first measures approximately 1650 mm in length, 85 mm in width and 90 mm in depth. There are no diagnostic elements visible upon the timber, such as tool marks or fixing points, and therefore its function remains unknown. It does, however, appear to be faced and is therefore unlikely to be a piece of natural driftwood. The second piece of wood measures approximately 196 mm in length and 20 mm in width. There is at least one possible nail hole visible and again it appears to have been faced or worked by human hands. It is heavily deg…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100180
Object type: CANNON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This item appears to be a small calibre black powder weapon, such as a swivel gun, commonly mounted on vessels throughout the age of sail as well as being used in terrestrial settings. The weapon is approximately 750 mm in overall length, with external muzzle diameter of approximately 110 mm flaring to an external diameter of 180 mm at the breech end. The condition of the artefact is poor due to heave concretion, though visual analysis suggests it is a muzzle loading gun. No Trunnions for mounting the weapon are immediately apparent despite the concretion. As their name suggests, swiv…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100184
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
A single piece of copper alloy sheeting, measuring approximately 70 mm by 55 mm with a thickness of c. 2 mm. The item bears 4 grooves pressed into the metal along the long axis on one face, only one of which is evident on the opposite face. The item appears to be distorted from its original shape, all the edges appear intact suggesting it is otherwise complete. The function of such an item is unclear, though it was recovered in close proximity to a swivel gun (MAS-D100180) and may relate to the functioning of such a weapon in some way.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100183
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Find comprises of a single length of copper or copper alloy wire, measuring approximately 140 mm long and 10 mm in thickness. The wire consists of a central core of copper alloy strands, which are then wrapped or sheathed in a strand of copper alloy tightly wound around the core. The wire appears to taper towards one end, though it is not clear if this part of its manufacture or damage occurring to it during its use or post deposition on the seabed. The function of this item, clearly incomplete as evidenced by its severed ends, is unclear. Its finding was recorded as being in close pro…
Created on: Friday 1st June 2018
Last updated: Friday 27th March 2020
Spatial data recorded.

Record ID: MAS-O100179
Object type: ORDNANCE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of 12 lead balls varying in diameter between c. 15 mm and 21mm. All appear unfired and bear the mould lines and sprue marks from being hand moulded in a 2 part mould. The balls themselves are in fair condition, though some bear concretion/encrustation. Images of the finds were sent to Charles Trollop, an expert in historical ordnance, who advised that in all likelihood these are English Standard Musket (0.775 " or 19.79 mm) and Carbine (0.615 " or 15.64 mm) Balls. These standards relate to most of the black powder/smooth bore period from the 17th to 19th centuries.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100178
Object type: TOOTHBRUSH
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secu…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100177
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Section of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships …
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100175
Object type: SHIP FITTINGS
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two brass deck water filler plates and one ceramic door number (45). The water filler plates are 150 mm in diameter and approximately 100 mm thick. They are both heavily degraded and concreted, distorting their 'mushroom-shaped' original form. It appears they have screws running through the wider top surface and hanging down below next to the tinner plug interior. The screws are approximately 50 mm long and 5 mm in diameter. This type of ships fiitting is used to provide an access point by which to fill water tanks on a vessel and are common on many vessels, from pleasure craft to com…
Created on: Wednesday 9th May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100174
Object type: CUTLERY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100138
Object type: CONTAINERS
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two shards of crockery with makers mark present. The stamp is made up of letters "H A P A G" and a stylised admiralty anchor which has a wooden stock behind a shield. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. The stamps would have been on the base of the corckery therefore it is not clear whether these pieces would have belonged to bowls or plates when they were in use. The shards are white, with dark flecked inclusions and yellowish patches. It is more than likely that these pieces we…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100146
Object type: UNIDENTIFIED OBJECT
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Find consists of an ornate metal piece, bearing a flyr de lys type of design above a solid bar, presumably used for mounting. No dimensions were given, though it is suggested to be made from lead and H shaped, the finder described it as "part of a fireguard from the ship room". This material type would seem unsuitable for such a purpose, therefore it is still unclear what the purpose of this object is, although it is generally accepted that it is a decorative object of some sort.
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100173
Object type: CLOCK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks. Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 9th April 2020
Spatial data recorded.

Record ID: MAS-F100172
Object type: AIRCRAFT COMPONENT
Broad period: MODERN
Workflow stage: Published
Rolls Royce Merlin 45 gear unit, serial number GU 69 677, with a truncated, heavily damaged and corroded, three bladed propeller. All three propeller blades have survived despite heavy corrosion, though the end of one is missing. The wiring in the propeller cam shaft is visible since the outer dome casing has partially disintegrated. The Merlin 45 engine was used in the Mk. V Supermarine Spitfire fighters, in Reconnaissance Spitfires (PR Mk. IG & P MK. IV), and early versions of the naval version the Supermarine Seafire Mk. IB and Mk. IIC). The Merlin 45 saw active service from ear…
Created on: Friday 27th April 2018
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-O100169
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Published
Double edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long. Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and o…
Created on: Saturday 20th January 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100133
Object type: BOTTLES
Broad period: POST MEDIEVAL
Workflow stage: Published
Two clear glass fruit bottles, one ornate green glass wine bottle, one tall brown wine bottle with glass hexagonal base (94 stamped on base) and one black glass bottle. The fruit bottles are 280 mm long and 70 mm wide. One appears to be more encrusted and discoloured than the other, but both are consistent in their shape. They possess straight bodies, abrubtly curving shoulders and straight necks running to applied finishes. One is still stoppered and contains what appears to be olives. Both are indicative of fruit bottles in style and shape. The two wine bottles differ in appearance…
Created on: Monday 23rd October 2017
Last updated: Friday 27th March 2020
No spatial data available.