2026-09-24T00:24:07+01:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results17110finds-1010MAS-100010FOOD AND DRINK SERVING CONTAINERROMANThis is a group of nine sherds of ceramic, of which six are samian ware (also called terra sigillata). Samian pottery is a mould-made, glossy red, mass-produced, fine tableware. It was first manufactured in northern Italy at the end of the 1st century BC, however by AD 43 production had moved to Gaul (France). The production of samian ware ended around AD 260. The following interpretation is based on the photographs associated with this record. An examination of the fabric and surviving decorative elements may provide further information on the region of manufacture or production centre and the identity of the potter, which can indicate a more accurate date of production. Images 1 & 4: A sherd of the base of a samian vessel, form unknown. The easily legible name-stamp is that of Advocisus who worked at Lezoux (Central Gaul) c. AD 160 to AD 200. Images 2 & 5: Three decorated samian sherds that all appear to be from form 37 bowls and are suspected to be from Central Gaul. All three have surviving decorative elements. Image 3: This smaller samian base sherd was probably part of a cup form. Interestingly, it has been observed that samian cup forms are very strongly represented in the Essex region, especially at rural sites, to a degree not seen elsewhere (Willis 2004). Image 5 (top right): The form of this non-samian sherd suggests that it is of 1st or earlier 2nd century AD date. Images 6 & 8: This is a Roman jug rim that was probably made in Britain. Image 7: This is the rim of an imported Roman amphora. Amphora are a type of wheel-thrown container used for the transport and storage of liquids and dry products. As an inexpensive container for the transport of goods, they were broken up and discarded at their destination rather than being reused.Samian vessels are known to occur in structured deposits associated with water, and therefore are interpreted to have played a role in the activities undertaken at such locations (Willis 2004). In some instances, in Britain, samian ware was a selected and prominent element within assemblages deposited in wells or shafts and other wet places (Willis 2004). Food preparation and consumption2121-1003001037/173MAS2016-09-14T00:00:00ZContainer by functionWith finder2016-09-28T09:50:33Z2017-04-13T10:05:01Z10952813925PAS57BC1B67001A23219687EssexTQ818251.507938610.60677648workroom.fragments.went10MAS MASMASCeramic10539OtherMouldedFragmentGoodROMANx41218ROMANx41218x41218Coastal walkingSubmitted as wreck to the Receiver of WreckMAS100010a.jpg27images/MASMF2024-10-09T14:13:34.321Zfinds-2020MAS-100020JARPOST MEDIEVALPottery sherd: a rim sherd from a Post Medieval glazed redware flanged bowl with a horizontal looped side handle. The sherd dates to the 17th/18th century. The manufacture and origin of the sherd is unknown due to the mass production of this type of kitchenware.Container3636160018001390/163MAS2016-10-31T00:00:00ZFood and liquid storage containerWessex Archaeology, Salisbury2016-12-13T09:55:35Z2017-04-03T11:14:33Z201528154PAS57C96ECD001E82PAS57BC21F300115B218210KentTR188251.494889831.13915054flipside.fearfulness.underpinned10MAS MASMASCeramic10539FragmentEncrustedPOST MEDIEVALx41047POST MEDIEVALx41047x41047Other chance findSubmitted as wreck to the Receiver of WreckPC120161.JPG74images/MASABB2024-10-09T14:15:07.95Zfinds-2626MAS-O100026SHIPS TIMBERNINETEENTH CENTURYTwo fragments of waterlogged wood with two copper fasteners dating from the post-medieval period onwards. The wood may be the remains of two planks of wood used in the construction of a ship as the planks are secured with one copper fastening and a hole is visible where another fastening may have also been used. Copper rivets are the standard method of fastening the planks to each other in clinker constructed vessels, or in the planks to the ribs or frames (Traditional Maritime Skills website, accessed September 2017). Clinker is a method of constructing the hull of a boat by fixing wooden planks so that the planks overlap along their edges. The overlapping joint is called a land. If the plank is too short for the hull, it would be necessary to extend the plank by joining with another piece of wood. Planks are also known as strakes (rubbing strake for example) so this method is also known as lapstrake. It is a very traditional method of ship construction. Metallic fastenings followed on from tree nails (also commonly known as trunnels and trennels), which were an older method of securing two planks together using wooden 'nails'.TRANSPORT36411008/173MAS2017-01-28T00:00:00ZVESSEL COMPONENTWith finder2017-01-28T22:05:37Z2018-05-22T15:29:15Z262142815PAS5989C577001EA7PAS5989C577001EA7222028North YorkshireNZ672154.57977665-0.96494213trek.amazed.stated10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNCoastal walkingSubmitted as wreck to the Receiver of WreckIMG_0877.JPG83images/MASLR2024-10-09T14:15:09.369Zfinds-3535MAS-D100035JARMEDIEVALPart of a large clay storage jar. Due to the size of the fragment and the degree of marine growth on this item it has been tentatively identified as an olive jar, probably Spanish in origin, and dating anywhere between the medieval to post-medieval period (13th/14th to 18th century), most likely from the latter end of this date range (16th - 18th century).FOOD PREPARATON AND CONSUMPTION29361032/173MAS2017-04-06T00:00:00ZJARWith finder2017-04-07T15:57:16Z2017-09-26T13:12:28Z351528115PAS57C96ECD001E82PAS57BC21F300115B2MAS MASMASCeramic10539FragmentMEDIEVALx14221POST MEDIEVALx41047x14221DivingSubmitted as wreck to the Receiver of WreckIMG_44381.JPG112images/MASABB2024-10-09T14:15:11.695Zfinds-4242MAS-D100042BOWLNINETEENTH CENTURYFragment of white ceramic bowl or lid marked with black and white geometric design and number '23'. Number appears to be hand-painted or stamped. Found loose on the seabed with a little marine growth present. This is a naval issue bowl probably used for drinking rather than smaller, handled cups, as they were more practical on board a ship. The number refers to the mess number, and the bowls were designed to be stored upside-down. The find dates to the late 19th or 20th century.CONTAINER39411119/173MAS2017-05-03T00:00:00ZFOOD SERVING CONTAINERWith finder2017-05-29T15:59:39Z2017-09-26T13:19:10Z425110160152811315PAS5989C577001EA7PAS57BC21F300115B214362DorsetSZ057950.6106936-1.93069645excuse.snore.bookings10MAS MASMASCeramic10539GeometricFragmentPoorNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckLid3.jpg147images/MASLR2024-10-09T14:15:13.613Zfinds-4545MAS-D100045BOTTLEPOST MEDIEVALBase of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.FOOD AND DRINK SERVING CONTAINER36361120/173MAS2017-05-17T00:00:00ZCONTAINERWith finder2017-05-30T11:34:20Z2020-02-28T15:54:03Z4511828115PAS57C96ECD001E82PAS57C96ECD001E82214362DorsetSZ058050.61968642-1.93068328princely.meaning.pulps10MAS MASMASGlass10879FragmentPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of WreckOnionbottle1.JPG150images/MASABB2024-10-09T14:15:14.327Zfinds-105105MAS-F100105STRUCTURAL TIMBERNINETEENTH CENTURYThese two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.ARCHITECTURE39411223/173MAS2017-08-23T00:00:00ZARCHITECTURAL FRAGMENTWith finder2017-08-23T08:21:58Z2018-05-22T15:29:55Z10521428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081780.JPG251images/MASABB2024-10-09T14:16:36.428Zfinds-106106MAS-F100106LADDERNINETEENTH CENTURYThese two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut. Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.Tools and equipment39411222/173MAS2017-08-23T00:00:00ZCompanion ladderWith finder2017-08-23T08:31:10Z2018-05-08T08:40:53Z10621428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081767.JPG254images/MASABB2024-10-09T14:16:36.661Zfinds-107107MAS-F100107TRANSPORTPOST MEDIEVALThis ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor. The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee. The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.SHIP36411224/173MAS2017-08-23T00:00:00ZTimberWith finder2017-08-23T08:34:54Z2018-05-23T13:57:54Z10711012083011428114PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081739.JPG262images/MASABB2024-10-09T14:16:36.896Zfinds-109109MAS-F100109BOATMODERNThis find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth. Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.TRANSPORT41411219/173MAS2017-08-23T00:00:00ZWATER CRAFTWith finder2017-08-23T08:40:58Z2018-05-08T08:40:03Z109524094012728114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081726.JPG277images/MASABB2024-10-09T14:16:37.539Z