2024-03-28T19:49:28+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results81100finds-110110MAS-F100110POSTPOST MEDIEVALHeavily eroded and abraded timber fragment with marine borer and growth present. As it is so worn, it is difficult to tell what type of wood it is and whether this fragment was originally completely shaped and worked, or just partially worked to achieve its function. The timber does not exhibit any evidence or staining from fastenings, however, there is one hole that could have been a fastening point at some stage.
It is thought that this fragment may be a broken post or groyne timber that has come from a beach rather than material relating to a wreck. Groynes are wooden barriers built at right angles to a beach to prevent the movement of material along the coast caused by longshore drift. They can be subjected to storm damage which results in them being broken and drifting out to sea. The possibility that this piece of wood derives from a vessel should not be ruled out, however. Shipwrecks represent an important part of our marine historic landscape and are important in understanding some of the most fundamental aspects relating to human past and experience.ARCHITECTURE36411220/173MAS2017-08-23T00:00:00ZARCHITECTURAL ELEMENTWith finder2017-08-23T08:45:04Z2018-05-08T08:39:55Z110180720114281314PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPoorPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081719.JPG284images/MASABB2018-05-08T07:39:55.115Zfinds-109109MAS-F100109BOATMODERNThis find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth.
Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.TRANSPORT41411219/173MAS2017-08-23T00:00:00ZWATER CRAFTWith finder2017-08-23T08:40:58Z2018-05-08T08:40:03Z109524094012728114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081726.JPG277images/MASABB2018-05-08T07:40:03.024Zfinds-106106MAS-F100106LADDERNINETEENTH CENTURYThese two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut.
Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.Tools and equipment39411222/173MAS2017-08-23T00:00:00ZCompanion ladderWith finder2017-08-23T08:31:10Z2018-05-08T08:40:53Z10621428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081767.JPG254images/MASABB2018-05-08T07:40:53.678Zfinds-105105MAS-F100105STRUCTURAL TIMBERNINETEENTH CENTURYThese two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.ARCHITECTURE39411223/173MAS2017-08-23T00:00:00ZARCHITECTURAL FRAGMENTWith finder2017-08-23T08:21:58Z2018-05-22T15:29:55Z10521428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081780.JPG251images/MASABB2018-05-22T14:29:55.334Zfinds-4545MAS-D100045BOTTLEPOST MEDIEVALBase of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.FOOD AND DRINK SERVING CONTAINER36361120/173MAS2017-05-17T00:00:00ZCONTAINERWith finder2017-05-30T11:34:20Z2020-02-28T15:54:03Z4511828115PAS57C96ECD001E82PAS57C96ECD001E82214362DorsetSZ058050.61968642-1.93068328princely.meaning.pulps10MAS MASMASGlass10879FragmentPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of WreckOnionbottle1.JPG150images/MASABB2020-02-28T15:54:03.447Zfinds-4949MAS-D100049WATER CRAFT EQUIPMENTPOST MEDIEVALTwo circular wooden pulley sheaves. It is not clear whether these wooden pulley sheaves were a pair or from single sheave pulleys. Generally made from ash (Fraxinus), hickory (Carya) in the case of North America, or Lignum vitae. Lignum vitae, Latin for 'wood of life', is a trade wood, also called Guayacan or Guaiacum from the trees of the genus Guaiacum. The trees are indigenous to the Caribbean and the northern coast of South America and have been an important export crop to Europe since the beginning of the 16th century due to its extraordinary combination of strength, toughness, and density. It was also considered to have self lubricating properties. Ash though tough and elastic is prone to wet rot. Roller bushes were also introduced during the 1880s to reduce friction on the sheave pin. A sheave's size depended mostly on the rope it handled, the higher up the rigging the block was, and the lighter the ropes, the smaller they were. Sheaves also shrank in size as rope quality improved over time, and the introduction of iron parts also contributed to this process. However, many ships continued to use larger blocks due to their making the work easier and therefore requiring less crew to operate.This item was found along with a wooden belaying pin (MAS-D100032) and a marble tile (MAS-D100050).WATER CRAFT36391032/173MAS2017-03-14T00:00:00ZSHIPWith finder2017-03-14T07:28:01Z2017-09-26T13:21:53Z49214283115PAS57C96ECD001E82PAS57C96ECD001E822MAS MASMASWood11988UncertainFairPOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of WreckIMG_3921.JPG164images/MASABB2017-11-06T18:19:33.525Zfinds-3232MAS-D100032WATER CRAFT EQUIPMENTPOST MEDIEVALA wooden belaying pin, approximately 0.4 m in length.
Belaying pins are either solid metal or wooden objects used on sailing ships to secure the running rigging. They are still seen today on traditional square rigged ships and replica vessels. More modern sailing vessels have tended to replace them with fixed cleats. Their design has little changed, comprising a rounded handle and cylindrical shaft of varying length and thickness, dependant on the workload placed on it. The shaft would fit into holes in pinrails, which lined the inside of the bulwarks around the base of the ship's mast, or a fife rail, which was a free-standing rail set on posts to hold the belaying pins to secure the ship's halyards. The ropes or lines would be wrapped around the pin in a figure of eight pattern to secure them. Similarly designed pins, known as thole pins, were inserted into the gunwales to act as a fulcrum for oars on small boats.This item was found along with two pulley sheeves (MAS-D100049) and a marble tile (MAS-D100050).TRANSPORT36391032/173MAS2017-03-14T00:00:00ZWATER CRAFT EQUIPMENTWith finder2017-03-14T07:28:01Z2017-09-26T13:11:50Z3211428415PAS57C96ECD001E82PAS57C96ECD001E822MAS MASMASWood11988CompletePOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of WreckIMG_3921.JPG104images/MASABB2017-11-06T18:21:06.602Zfinds-1717MAS-100017MAMMAL REMAINSUNKNOWNThis cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema.
Providing a relative date for this cattle mandible is challenging without further examination.Cattle are arguably the most important species of livestock - providing products such as meat, milk and leather; and strength for agricultural tasks (e.g. ploughing) (Zhang et al. 2013). The domestication of cattle (Bos spp) is generally accepted to have occurred around 10,500 years ago in the Near East (Zhang et al. 2013). Cattle dentition is an important archaeological signature of ancient cattle husbandry, as dentition varies between individual cattle due to genetics, diet and the geographical location in which they were raised. The age of an animal at death can also be determined by the stage of dental development and the wear of the mandibular teeth (McGrory et al. 2012: 3224).Ecofacts294113MAS2016-10-17T00:00:00ZVertebrate remainsIn situ2016-10-18T08:58:44Z2017-01-16T15:01:10Z172152825PAS57BC1B67001A23PAS57C96ECD001E82219687EssexTQ818251.507938610.60677648workroom.fragments.went10MAS MASMASAnimal skeletal material10232IncompleteMEDIEVALx14221MODERNCoastal walkingSubmitted as wreck to the Receiver of WreckIMG_20161016_080811389.jpg64images/MASMF2017-11-06T18:23:50.425Z