MAS-6105BA: FIREARM
This gun is a QF (quick firing) 6-pounder Hotchkiss, a light 2.25 inch (57 mm) naval and coastal defence gun from the late 19th century. The design appears to be pre-1890 as it does not have the recoil system that was introduced at that time. The original 1885 Mk I was a built-up gun with a vertical sliding-block breech. The name comes from the French manufacturing company, Hotchkiss, who were the major supplier of light QF guns in the world. This type of gun became a standard torpedo defence weapon; many navies bought this same type of gun (Friedman 2011).
Stable URI: https://marinefinds.org.uk/database/artefacts/record/id/1

MAS-100004: CLAY PIPE (SMOKING)
All three white pipes here are complete, and are of the short or 'cutty' form. Two carry relief moulded decoration featuring Masonic emblems (incorporating the crossed compass and square), while the third is in the form of a male head, wearing a thin-brimmed cap, possibly a military figure. Pipes with Masonic emblems were made from the mid-18th century in the UK, but remained popular into the early 20th century, while the male head falls into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, common in the late 19th and early 20th centuries. Such decorative pipes would have been commonly exported. Tobacco was grown in West Africa from the 17th century; the inhabitants made their own pipes, the manufacture evolving from that of pottery vessels, but they also imported some through the Atlantic trade (Knight 2010, 67). The inclusion here of the Masonic pipes is of interest; their use was not necessarily confined to Freemasons, but it is likely that they would have been of greater significance to smokers for whom the symbols they bore had meaning (White and Beaudry 2009, 220).
Stable URI: https://marinefinds.org.uk/database/artefacts/record/id/4

MAS-1F5444: BEAD
Twenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing the layers to be seen from the side. These polychrome beads are of a type known as 'chevron' or 'rosetta' beads, which for several hundred years have been a speciality of the Venetian glassmakers. First appearing in the late 15th century, they were made from a short section of drawn-out hollow cane in a translucent greenish glass, coated with six further layers of white, translucent greenish, red and blue glass, and given a star-like cross-section by pressing in a 12-pointed corrugated mould; the canes were then cut into short lengths and the ends ground to expose the inner layers. Later beads may have fewer layers; they are still being made in Venice today, albeit in very small quantities. These beads can reach up to 90 mm in length and 60 mm in diameter, however the more common size is 20-30 mm in length and 10 mm in diameter. In the UK, chevron beads usually belong to 16th or 17th century contexts, but they were also made in quantity for export to West Africa and the Americas, and the peak of production came during the 19th and early 20th centuries. These later beads were usually of four and six layers, in red, blue and white. Chevron beads are still highly valued in present-day West Africa, where they continue to be worn for prestige and ceremonial purposes, and are occasionally buried with the dead.
Stable URI: https://marinefinds.org.uk/database/artefacts/record/id/3

MAS-100007: SPOON
This spoon is made of a metal alloy, possibly copper alloy, and was probably originally plated. Its manufacture would have been cast. The Royal Australian Air Force (RAAF) crest is stamped into the end of the spoon. The crest features the RAAF monogram with a laurel wreath surmounted by a crown. This crest is the same style as that used for cap badges and is modelled from a Royal Air Force (RAF) crest. The more widely adopted RAAF crest was commissioned and designed in 1937 and accepted in 1939. It is composed of the imperial crown mounted on a circle featuring the words 'Royal Australian Air Force' and overlaid with a wedge-tailed eagle. Beneath this the scroll work displays the Latin motto 'Per Ardua Ad Astra' (through adversity to the stars). This spoon may have been issued by the RAAF victualling department for squadron members to use in the mess, or to a particular individual as one item of their personal mess gear accompanied by crockery and other cutlery. It was the Australian Defence Force that adopted the cutlery moniker 'eating irons'. The spoon was discovered on Batten Beach, Plymouth, which is in proximity to RAF Mount Batten, a RAF station and flying boat base, and indicates the likely origin and time period of its loss, although it may have been produced any time after 1921, when the RAAF was formed.

MAS-100008: MAMMAL REMAINS
This tooth is a cattle (Bos spp) molar from the upper jaw. It has four crescentic cusps (polycuspid) forming a square crown, as well as four root elements. These characteristics are typical of selenodont teeth which are found in ruminant herbivores (e.g. cattle, goats, sheep, or deer). Viewed from the side, the crown of the tooth forms triangular profiles which, in combination with ridges, makes the sideways jaw motion of ruminants an effective way to break-up tough plant matter. Thus their function as crushing and grinding teeth. The alternating layers of enamel, dentine and cementum are exposed. The surface of the neck of the tooth is white and grey, however, there is also a distinct bluish tinge to parts of the tooth that may indicate the presence of the iron phosphate mineral, vivianite. The presence of vivianite attached to bones is generally accepted as evidence of subfossil status. Providing a relative date for this tooth is challenging as there are numerous reasons as to why it has not fully fossilised. It may be that not enough time has elapsed since the animal died, or the conditions in which the remains were deposited may not have been optimal for fossilisation. While the domestication of cattle occurred approximately 10,500 years ago in the Near East, it is generally accepted that domesticated cattle first appeared in England during the Neolithic (circa 4,000 BC) (Lynch et al. 2008).

This is an assemblage of six round cast iron and stone projectiles of varying sizes. Due to the ubiquitous nature of their design, it is difficult to accurately date cannonballs with any certainty. This issue is compounded by the wide variation in designs and calibres of the cannons that fired them and the lifespan of the weapon, with obsolete designs often still in use on merchant ships long after they had fallen out of service with the various navies of Northern Europe, who also used captured weapons on their vessels. Cast iron cannonballs are thought to have appeared at some point during the 15th century and were used as late as the last quarter of the 19th century, having gradually superseded stone cannonballs. By this time, rifled artillery had become the norm. From their general condition and flaking, these examples are heavily corroded. The round shot of speckled appearance could be granite, and may pre-date the cast iron round shot. An element of lead may also be involved in the manufacture of some of the shot in this assemblage. The following potential identifications are based on the associated images for this record. Images 1, 2 & 4: Left: 4¼ inch iron cannonball, originally weighing approximately 10 pounds. A shot of this size may have been fired by a demi culverin. Demi culverin guns fired round shot of 4 - 4½ inch diameter weighing approximately 12 pounds (Collins 2016). The breaks may have happened after deposition due to the rusting and fracturing of iron. Middle: 3¼ inch iron cannonball, originally weighing approximately 5 pounds. A shot of this size may have been fired by a saker. Saker guns fired round shot of 3 - 3¾ inch diameter weighing approximately 6 pounds (Collins 2016). Right: 3¾ inch iron cannonball, originally weighing approximately 7 pounds. A shot of this size may have been fired by a saker. This is only a fragment of the cannonball, about two-thirds remain. Images 3, 5 & 6: Left: 2 inch stone shot (possibly granite), originally weighing approximately 1 pound. A shot of this size may have been fired by a falcon. Falcon ordnance of 2½ inch calibre fired round shot weighing approximately 1½ pounds (Collins 2016). Middle: 1¾ inch possible lead alloy shot, originally weighing approximately 12 ounces. A shot of this size may have been fired by a base. Base ordnance of 1½ inch calibre fired round shot weighing approximately ½ a pound (Collins 2016). Right: 1¼ inch possible lead alloy shot, originally weighing approximately 4 ounces. A shot of this size may have been fired by a musket. A musket is a long gun, fired from the shoulder, which is muzzle-loaded and has a smooth bore (Collins 2016).

MAS-100010: FOOD AND DRINK SERVING CONTAINER
This is a group of nine sherds of ceramic, of which six are samian ware (also called terra sigillata). Samian pottery is a mould-made, glossy red, mass-produced, fine tableware. It was first manufactured in northern Italy at the end of the 1st century BC, however by AD 43 production had moved to Gaul (France). The production of samian ware ended around AD 260. The following interpretation is based on the photographs associated with this record. An examination of the fabric and surviving decorative elements may provide further information on the region of manufacture or production centre and the identity of the potter, which can indicate a more accurate date of production. Images 1 & 4: A sherd of the base of a samian vessel, form unknown. The easily legible name-stamp is that of Advocisus who worked at Lezoux (Central Gaul) c. AD 160 to AD 200. Images 2 & 5: Three decorated samian sherds that all appear to be from form 37 bowls and are suspected to be from Central Gaul. All three have surviving decorative elements. Image 3: This smaller samian base sherd was probably part of a cup form. Interestingly, it has been observed that samian cup forms are very strongly represented in the Essex region, especially at rural sites, to a degree not seen elsewhere (Willis 2004). Image 5 (top right): The form of this non-samian sherd suggests that it is of 1st or earlier 2nd century AD date. Images 6 & 8: This is a Roman jug rim that was probably made in Britain. Image 7: This is the rim of an imported Roman amphora. Amphora are a type of wheel-thrown container used for the transport and storage of liquids and dry products. As an inexpensive container for the transport of goods, they were broken up and discarded at their destination rather than being reused.

MAS-100011: CLAY PIPE (SMOKING)
This is a very worn example of a 'cutty' (short) pipe (total length 115 mm) with a round-based spurless bowl imitating a briar pipe, and decorated with multiple 'thorns' - small pointed protrusions around the stem and bowl. This type of bowl was in use between c. 1850 and 1910 (Atkinson and Oswald 1969: type 30), and the thorn design was one of the many decorative types popular during this period (e.g. Ayto 1994:11; Hammond 2009: figure 7). Clay tobacco pipes were manufactured (using two-piece moulds) in huge quantities in many towns and cities around the UK and were also imported from the Continent. They were cheap, highly disposable items, often given away with a pint of beer by the local publican. The short 'cutty' pipes were popular with working men as they could be smoked while working, whereas the longer pipes were more for smoking at leisure. This clay pipe was found approximately 250 m outside the offshore designated area for the HMS Coronation wreck site. The period of the pipe's manufacture confirms that it is not associated with this vessel, which was wrecked in 1691. The pipe's location is thought to be within an extensive dumping site featuring artefacts dating from the 19th century through to the modern period.

MAS-100012: LANDING CRAFT INFANTRY
This hulk is situated on the River Deben, just outside of Melton (Suffolk) and is estimated to measure 11.5 m in length and 3 m in width. The structure is rectangular in shape with squared edges and straight sides. One end suggests the presence of a bulkhead and a hatch or doorway, while the other end is missing. Parts of possible rudder components are located close to the bulkhead, suggesting that this is the stern. Internal frames can be seen throughout the remaining structure; estimated measurements reveal a spacing of approximately 0.42 m. The hull is constructed of wood in a double diagonal layout, with metal plating over the top on the exterior of the hull. The hulk shows extensive deterioration and many of its fixtures and fittings have been stripped. A large proportion of the vessel is now missing. The shape, size and construction are all indicative of a British Landing Craft Assault (LCA) from the Second World War (WW2). The basic structure of this type of landing craft was a double diagonal wooden hull, commonly built using mahogany (Lavery 2009:20), although other timber species were used to keep up with the number of vessels required. Steel armour plating was then added as an outer skin. The overall length of an LCA was 12.7 m (41.6 ft) with a beam of 3 m (10 ft) (Royal Marines Museum). The main feature of LCA's was the bow ramp, used for amphibious landings such as on D-Day. This part of the vessel appears to be missing and may explain why the hulk has no bulkhead or bow features. The main use of the vessel was for troop transport; this featureless area took up most of the length of the hull. The internal frame spacing of LCA's was 0.45 m (Lavery 2009:21). At the after end of the troop compartment was a watertight bulkhead that separated the engine room (Lavery 2009:19). This bulkhead had a hatch for access by the stoker, which may be what is visible on the remaining hulk. After the engine room there was no further armour plating, which serves to explain the complete loss of the stern. It is difficult to positively identify this vessel as, athough the hulk displays several characteristics of an LCA, with the overall lack of structure it is possible that the remains may be of a barge or similar vessel.

MAS-100016: UNIDENTIFIED OBJECT
This assemblage of metal objects includes an iron handle possibly inscribed with letters; a lead sailmakers palm guard; a bronze scribe; a small gun powder measure; a cup; and what are possibly a musket ball and a rivet; along with several other metal objects of unknown function. All the items appear to be post medieval in date. It is thought that these finds are either being washed into the area from another location or are being exposed by erosion, as each visit to the location reveals more objects.

MAS-100017: MAMMAL REMAINS
This cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema. Providing a relative date for this cattle mandible is challenging without further examination.

Pottery sherd: a rim sherd from a Post Medieval glazed redware flanged bowl with a horizontal looped side handle. The sherd dates to the 17th/18th century. The manufacture and origin of the sherd is unknown due to the mass production of this type of kitchenware.

MAS-O100026: SHIPS TIMBER
Two fragments of waterlogged wood with two copper fasteners dating from the post-medieval period onwards. The wood may be the remains of two planks of wood used in the construction of a ship as the planks are secured with one copper fastening and a hole is visible where another fastening may have also been used. Copper rivets are the standard method of fastening the planks to each other in clinker constructed vessels, or in the planks to the ribs or frames (Traditional Maritime Skills website, accessed September 2017). Clinker is a method of constructing the hull of a boat by fixing wooden planks so that the planks overlap along their edges. The overlapping joint is called a land. If the plank is too short for the hull, it would be necessary to extend the plank by joining with another piece of wood. Planks are also known as strakes (rubbing strake for example) so this method is also known as lapstrake. It is a very traditional method of ship construction. Metallic fastenings followed on from tree nails (also commonly known as trunnels and trennels), which were an older method of securing two planks together using wooden 'nails'.

MAS-O100028: BOTTLE
A bottle made from dark green/black glass, bearing a protruding cork. It has a slightly concave body, flaring moderately at the base, leading to gently rounded shoulders with clear definition where they intersect with the neck. The neck itself is broadly straight, tapering slightly where it meets the finish. The finish is of either a double oil or brandy type. The bottle is reminiscent of a spirit bottle of the squat cylinder style, though vessels of this style were used to contain a variety of products beyond beers, wines and spirits. Bottles of this type were manufactured from at least the 1730's until the late 19th century, examples of both free blown and moulded vessels are known. This bottle is likely to have been hand blown in a mould, it bears a slight lean from the base but otherwise appears uniform.

MAS-D100029: AMPULLA
An incomplete, flask shaped ampulla made of lead dating to the late Medieval period, around AD 1350 to 1500. These objects are believed to have been used to transport holy liquid from pilgrim sites. The ampulla, found in the River Wear, has a rounded body that extends upwards into the neck and diverges outwards towards the top. One handle on the side of the neck is intact and the remains of a second handle is visible on the other side of the neck. The obverse side of the ampulla is rounded and there are no visible decorations remaining. A relief decoration of a small equal-armed cross within a circle is visible under raking light on the reverse, flat side of the body of the object.These are normally associated with Christian cross symbology.

MAS-O100031: TIMBER
Possible ships timber or part of other marine or land based structure. Truncated rounded timber with hole and evidence of mounting plate for furniture, broken or rotted off at one end exposing heart wood and a knot in the wood. Approximately 2000 mm long and 600 mm in diameter. The undamaged half of the timber appears in good condition, implying a more recent date for the timber, whereas the other part appears to have suffered extensive degradation. The arrangement of damage to the timber suggests it may have been partially submerged during its useful life, possibly as part of a shore based instalment such as a jetty or quay.

MAS-D100038: BOTTLE
Four glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - these examples therefore probably date to the 19th century, but pre-dating the 1880s.

MAS-D100051: DRINKING VESSEL
One ivy leaf patterned teacup marked with the Davenport logo. This transfer printed refined ware (either pearlware or whiteware) cup dates to the 19th century. John Davenport acquired his own pottery in 1794, initially producing cream coloured blue-printed earthernware. Within 12 years the company's reputation and the quality of its porcelain was such that the future King George IV was ordering services from the company. John Davenport retired in 1830 and the company was continued to be run by his sons and their children until 1887 when the factory closed and the company was acquired by Burleigh Pottery.

MAS-D100039: CANDLESTICK
Two mass produced glass candlesticks; one blue and one green that is badly damaged presumably having spent at least a century underwater. No further information is known about them at this time.

MAS-O100041: CANDLESTICK
One green glass candlestick measuring 5.5 inches high and 3.5 inches wide. This candlestick is thought to date to the 19th century.

MAS-O100053: BOTTLE
One gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - this examples therefore probably date to the 19th century, but pre-dating the 1880s.

MAS-D100042: BOWL
Fragment of white ceramic bowl or lid marked with black and white geometric design and number '23'. Number appears to be hand-painted or stamped. Found loose on the seabed with a little marine growth present. This is a naval issue bowl probably used for drinking rather than smaller, handled cups, as they were more practical on board a ship. The number refers to the mess number, and the bowls were designed to be stored upside-down. The find dates to the late 19th or 20th century.

MAS-D100045: BOTTLE
Base of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.

Two stoneware jars with feldspathic glaze over yellow ochre dip on upper part of vessels. One carries the stamped mark of the manufacturer: 'Doulton & Watts' Lambeth Pottery'. The firm of Doulton and Watts was established in 1820 as Watts and Doulton, becoming Doulton and Watts by 1826 (Tyler et al. 2005, 12). This particular stamp was used until 1858, when John Watts died, after which the name Doulton appeared alone (Eyles and Irvine 2002, Appendix II), although the company name of Doulton and Watts was used in trade catalogues until at least 1873. Feldspathic glazes were introduced in the 1830s. The two jars are of similar form, although differing slightly in size. This particular jar form is known as an 'export jam jar' in the Doulton & Watts catalogue for 1873, made in sizes from ½ lb to 6 lb (Tyler et al. 2005, fig. 54). The narrow mouth would either have held a bung of some kind, or have been fitted with a patent airtight closure.

MAS-D100047: BOWL
Seven Chinese style bowls most likely to be made of porcelain. There is a parallel for the base mark that looks as though it's imitating Chinese porcelain marks. This is the mark of Charles Meigh of Hanley, Staffordshire, operating between 1835-49, but it was also used by the preceding company, J. Meigh and Son (c.1805-34) and the succeeding company, Charles Meigh and Son (1851-61) (Godden 1964, 428-429). The CM mark in the '..CASTER' stamp suggests that it's Charles Meigh, which puts the date just before the wreck date.

Eleven teacups measuring 4 inches x 3 inches in size. The cups have a Chinese style design with a light grey colour pattern, and appear to be made of porcelain (although this has not been confirmed). Similar in decorative style to the bowls recorded as MAS-D100047, it is assumed that these teacups were made by either Charles Meigh of Hanley, Staffordshire (1835-49), the preceding company, J. Meigh and Son (c.1805-34), or the succeeding company, Charles Meigh and Son (1851-61) (Godden 1964, 428-429).

Four milk jugs with a Chinese style design and a light grey coloured pattern and appear to be made of porcelain (although this has not been confirmed). Similar in decorative style to the bowls recorded as MAS-D100047, it is assumed that the these milk jugs were made by either Charles Meigh of Hanley, Staffordshire (1835-49), the preceding company, J. Meigh and Son (c.1805-34), or the succeeding company, Charles Meigh and Son (1851-61) (Godden 1964, 428-429).

MAS-O100062: HANDAXE
Lower Palaeolithic ovate handaxe dating to around 250,000 years bp (before present). Patina evident on its surface indicates that the tool has been deposited in chalk, therefore it probably originated offshore and was washed onshore (rather than eroded from terrestrial river terraces). This identification was made by Bryan Popple of Bournemouth Natural Science Society and Museum. Matt Leivers, an in-house specialist at Wessex Archaeology believes it is a very rolled and abraded Lower Palaeolithic handaxe that has clearly been around on the seabed for a considerable period of time.

MAS-D100063: BOTTLE
Five olive green case gin bottles with a square tapered body and four dots on base. Some of the earliest spirit bottles were square in cross section and generally designed to contain gin, though undoubtedly contained various types of alcohol and possibly wine. Commonly called "case gin" or "taper gin" bottles since they would pack more efficiently to a case (six to 24 bottles) than round bottles. Case gin bottles are square with a more or less distinct taper inwards from the shoulder to the base. The neck is very short to almost non-existent with the finishes varying from a laid-on ring, flared, mineral finish, oil, and even a blob. This shape and style of bottle originated, and was commonly made, in Europe at least as early as the mid-17th century (https://sha.org/bottle/liquor.htm#CaseGinbottles accessed October 2017). These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later and may therefore be earlier 19th century.

MAS-D100079: CLAY PIPE (SMOKING)
All three pipes here are complete and are of the short or 'cutty' form. Two of the pipes measure 100 mm and have bowls in the form of a male head, wearing a thin-brimmed cap, while the third, which measures 120 mm, has a simple impression pattern around the outside of the rim. The male head on two of the pipes has previously been thought to represent a military figure or the head of a French soldier. They fall into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, that were common in the late 19th and early 20th centuries. Such decorative pipes would have been commonly exported. Tobacco was grown in West Africa from the 17th century, where the inhabitants made their own pipes. The manufacture evolved from that of pottery vessels, but they also imported some through the Atlantic trade (Knight 2010, 67), which is likely what these pipes represent.

MAS-D100080: PERFUME BOTTLE
Two clear glass perfume bottles. One has a square tapered body and measures 85 mm by 35 mm while the other measures 95 mm by 40 mm and has a round body complete with a round stopper and still contains yellow liquid. Perfume bottles were part of the vessel's cargo and many other bottles have been salvaged from the wreck by divers during recent years. Their form would be entirely consistent with a date around the turn of the 19th/20th century.

Three aqua coloured glass bottles with tooled lips; for foodstuffs or other household goods; probably dating to the 19th century. These bottles have a double ring also known as a double collar, double bead, double lip, Davis-type, stacked ring, bead lip with a ring, round band lower flared, broad round collar with lower bevel, inverted double ring, citrate of magnesia finish, double roll collar and stacked ring. This two-part finish is composed of two connected 'rings' - usually with a thicker and slightly wider variably rounded ring at the top of the finish with a thinner and narrower variably rounded to flat ring below. Other variations can have either or both rings somewhat or totally flattened on outside, which is similar to the three bottles recorded here. This popular finish was used on many different bottle types but was most common on a wide array of medicines, many varieties of liquor flasks and various sauces. Between about 1840 and the 1920s, and particularly between 1850 and 1910, this style of finish was one of the most popular and functional finishes used. It can be found on both mouth-blown and machine-made bottles. The lips or double ring on the bottle seem to be a tooled lip which means the lip was formed in the mould itself rather than applied to the bottle separately. The popularity of this finish was probably a combination of corking strength and relative ease of manufacturing (Society for Historical Archaeology webpage, accessed September 2017).

MAS-D100068: WINE BOTTLE
Two green glass wine bottles that appear to have the flat band-like collar around the rim which is typical of Continental (particularly French) wine bottles; the type appeared around the middle of the 19th century. This particular shape was - and still is - referred to as a 'hock' or Rhine wine and was one of the three dominant styles of wine bottles that bridge the time from at least the mid-19th century to the present day. Hock wine bottles are of German or French origin and during the 19th century, typically contained both red and white Rhine and Mosel wines. The distinctive shape of these bottles is typified by being tall and slender with no sharp break where the body merges into the shoulder and the shoulder becomes the neck. They were typically free-blown or dip moulded, often exhibiting pontil scars where the glass was broken away from the rod. Hock wine bottles from the 19th and early 20th centuries are most often seen in shades of olive green or amber, but were produced commonly in a wide array of other colours (Society for Historical Archaeology webpage, accessed Sept 2017).

Six stoneware seltzer bottles, of a type used to carry mineral water from various Continental (mainly German) spas. The term 'seltzer' takes its name from the town of Selters in the lower Rhineland, one of the original producers of effervescent mineral waters. This cylindrical bottle type was used from the early 19th century through to the First World War. These types of bottles were produced by the specialist potters known as Krugbacker, or pot bakers, in the Westerwald region of Germany. These bottles, which changed little throughout the 19th century, were slender and cylindrical and colored reddish brown with straight, vertical sides. Bottles were stamped with marks indicating the bottling company, the jug baker's mark, the well number from which they were filled, and the town from which they were shipped (NMSC Archaeology & Museum Blog webpage, accessed September 2017).

Four stoneware bottles (three large and one smaller) that were probably used for beer, ale, stout or porter. Stoneware bottles provided the ultimate in protection from the detrimental effects of light but were very heavy. They were produced in Britain in the 1800s and many bottles found in the United States were even imported from here. All of these bottles have a feldspathic glaze over an ochre dip on the upper parts of the bottle giving them a darker colour on top. Feldspars (natural rocks of aluminosilicates) are used in stoneware and porcelain glazes because they fuse only at high temperatures. The feldspathic glaze dates the bottles to the 1830s or later while stoneware bottles were more or less superseded by glass by the first decade of the 20th century.

One Hamilton bottle also known as a torpedo or egg bottle. These bottles are named after their English inventor, William Francis Hamilton who took out a patent in 1809 for a method of bottling soda and other mineral waters, involving ovate bottles (although use of ovate bottle probably pre-dated his patent by at least 20 years). These bottles became common in the 1840s when the manufacturing of mineral water became very popular. Before this date, carbonated water was only sold on a small scale. The bottle was invented as a way of keeping the gas in fizzy drinks. The pointed base meant that the cork or stopper was always airtight as it was always wet and swollen due to being laid on its side (Dale 2012). A Swiss chemist, Jacob Schwepper, set up a chemist's shop in London and was selling the newly invited artificial fizzy spring water known as aerated water in the early years of the 19th century, and was an early user of the Hamilton bottles to keep in schweppervescence. However, bottles with a pointed base were difficult to transport and could not be stood upright (Dale 2012). Common use of ovate bottles runs from the 1830s through to the end of the century.

MAS-D100074: INK BOTTLE
A collection of four ink bottles; one large and three small. The larger stoneware ink bottle displays a pourer on the rim and is glazed with a feldspathic glaze. This type of ink bottle was introduced in the 1860s and were superseded by glass bottles by the first decade of the 20th century. Cylindrical stoneware ink bottles were made in England in large quantities throughout the Victorian era. The bottles varied widely in size and were not all brown. The larger or master bottles with a pouring lip brown bottles were commonly used for ink. The pouring spout would be used to distribute the ink in to smaller wells (Hume 2001). Of the three smaller stoneware ink bottles, two are glazed with a feldspathic glaze. This type of ink bottle was introduced in the mid-19th century and were superseded by glass bottles by the first decade of the 20th century. Small ink bottles or wells were usually no more than four inches high and did not have a pouring spout like the master bottles as they were intended to be dipped into (Hume 2001). These ink bottles came in two main varieties; very squat cinders or wide-based cones.

MAS-D100078: EGG CUP
One egg cup made of a refined whiteware.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is not until the Victorian era that eggcups were mass marketed and regularly offered with dinnerware services. Companies, like Wedgwood and Haviland, produced eggcups and decorated them in the styles of their bestselling china patterns although the example recorded here appears to be undecorated. It is thought that this example may date to the 19th or 20th century.

MAS-D100076: ROUNDED BOWL
Six small convex bowls that may have also functioned as cups or tea bowls. All the bowls are made of a refined whiteware and three of them display a hand painted decoration.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily, white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is thought that these examples may be tea wares dating to the 19th or 20th century.

MAS-O100099: HANDAXE
Heavily sea-rolled and worn worked flint tool, covered in chalk patination (see third image). The flint measures 80 mm long, 60 mm wide and 30 mm thick, and unfortunately about 20% of the working end has recently broken off. Due to wear and damage on this hand-worked tool it has been difficult to confidently identify. Bryan Popple of Bournemouth Natural Science Society and Museum believes it could possibly be Homo neanderthalensis dating to around 200,000 years bp (before present). The smaller size indicates typical Neanderthal workings in comparison to the larger and older Homo heidelbergensis handaxe previously reported as MAS-100062. The attached images shows both handaxes for comparison. The possible Neanderthal tool is the smaller darker tool. Matt Leivers, an in-house flint specialist at Wessex Archaeology was unsure whether the flint was a handaxe and would need to visually inspect the object in order to be certain.

A collection of four stoneware ginger beer bottles covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. These bottles relate to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectibles, accessed November 2017). These stoneware ginger beer bottles were produced in Britain by the Doulton Lambeth Company. 'VI' stood for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).

A collection of five bottles comprising two full-size glass bottles, one squat cylindrical glass bottle, one small clear bottle, and one stoneware bottle. All the bottles are believed to be of nineteenth and twentieth century type, although it is difficult to date all but the stoneware bottle. The two full-size glass bottles are thought to be either wine or beer bottles. If the bottles have kicked bases, it would indicate a wine bottle, while a flat base would indicate a beer bottle. The squat cylindrical glass bottle was thought to be a port bottle, however if the base is flat, this could also be another example of a beer bottle. The small clear bottle with a long narrow neck is thought to have been used for foodstuffs, possibly a condiment of some sort. ​The ginger beer stoneware bottle is covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. This bottle relates to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectables, accessed November 2017). This stoneware ginger beer bottle was produced in Britain by the Doulton Lambeth Company. 'VI' stands for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).

MAS-D100085: CLAY PIPE (SMOKING)
A selection of seven clay pipes. Two of the pipes are of 'Irish' type (Atkinson and Oswald 1969, type 31, dated post-1840), with spurs and milled bowl rims, and the remaining five are of a spur-less form copying the briar pipe (ibid., type 30, dated c. 1850-1910). All of the clay pipes are 'cutty' (short) pipes. The spur-less examples are all stamped with the mark 'H B W Russell Co.'. This appears to be the mark of an agent or retailer rather than the pipe manufacturer (as is more usual). H. B. W. Russell may have a connection with Liverpool - pipes stamped 'HBW Russell of Liverpool' have been found in Ghana (Basford 2012), but the company also had a base in Cape Town (Micots 2010).

MAS-D100087: DOMED LID
One ceramic serving dish lid made of a refined whiteware with transfer-printed design in red.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c. 1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate).

Three cylindrical glass bottles. The two larger bottles are full size wine bottles. One is of the 'Burgundy' type and is most likely Continental. The half-size wine bottle, originally thought to be a champagne bottle, also has a Continental style neck. The Continental style neck appears around the middle of the 19th century (Dumbrell 1983). All are of nineteenth or twentieth century type.

Two case gin bottles. Some of the earliest liquor bottles were square in cross section and generally designed to contain gin though undoubtedly contained various types of liquor and possibly wine. Commonly called 'case gin' or 'taper gin' bottles since they would pack more efficiently in a case (6 to 24 bottles) than round bottles. Case gin bottles are square with a distinct taper inwards from the shoulder to the base. The neck is very short to almost non-existent with the finishes varying from a laid-on ring, flared, mineral finish, oil, and even a blob. This shape and style of bottle originated in, and was commonly made in, Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later (Historic Glass Bottle Identification & Information Website, accessed November 2017), and may therefore be earlier 19th century.

MAS-F100103: BOTTLE
This flat-based Hamilton, or 'torpedo' bottle stands 240 mm high, with a 64-mm wide base and is approximately 90 mm wide at the waist. It has a 'bottle logo' embossed on its base. There are possibly other text/numerals that have since worn away. The bottle shows moulding scars on the base and sides. It has a crown top finish. The egg-shaped bottle was first patented by William Francis Hamilton in 1814, the idea being that the bottle had to be stored on its side to keep the cork wet and ensuring a good seal on the reusable bottle. In around 1870, the flat based egg or Hamilton bottle was introduced. Following the 'blob top' finish being replaced by the crown top and cork sometime after 1892, when this cap design was patented, the design became more popular. This was because the bottles could now be reliably stored upright without cork shrinkage and a leaky seal causing loss of the carbonated gas. This is recognisable on this bottle by the beaded rim that the metal cap fitted over. These are also generally c.25mm in diameter. The cap would have been metal with a cork lining. This, however, lead to the decline in the popularity of torpedo bottles as it made them no longer necessary (Lucas, 2010). The mould scar travels up the neck to the lip of the bottle and this would suggest that it was manufactured around 1910 on a semi or fully automated bottle making machine, near to the end of their popularity. The 'bottle logo' on the base is probably the manufactures logo, however, several manufacturers used the same logo as their mark and therefore it has not now been possible to isolate its exact point of manufacture. The bottles were extensively exported from the U.K. and are therefore found around the world, but particularly in the former colonies and North America.

MAS-F100104: SHELL CASES
The shell case measures 660 mm long and is 152 mm in diameter at the base, and 116 mm in diameter at the neck though this has been buckled and stretched. The shell case appears to have been either constructed without a base, or it has been removed at some point in the past. The diameter of the neck and its overall size point to it being a 4.5-inch or possibly a 4.7-inch shell case. Without the base with the details of type, manufacturer and date of manufacture, the history and origin of this case is not clear. It would have been part of a fixed round, i.e. the shell was attached to the shell case like a large rifle round. The maximum weight of these rounds was around 36 kg (80 lbs), which was the weight considered to be sustainable for loading manually loaded fixed ammunition. The 4.5-inch gun has been the standard medium-gun calibre of the Royal Navy for use against surface, aircraft and shore targets since 1938, and in the case of the 4.7-inch gun since 1916. The history of this shell case is unknown, however, based on the damage it has sustained and the degree of corrosion, it appears that the shell was pried out of it and the base cut off with a lathe at some point in the past, before the remainder was lost or discarded.

MAS-F100105: STRUCTURAL TIMBER
These two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.

MAS-F100106: LADDER
These two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut. Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.

MAS-F100107: TRANSPORT
This ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor. The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee. The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.

MAS-F100108: PORTHOLE
This object is the remains of a brass porthole ring measuring 250 mm across with a brass rim 28 mm wide. It is thought that this frame would have been on the outside of the hull of the vessel while an internal frame on the inside of the vessel would have contained the glass element and a hinged deadlight (a metal plate that was both a curtain and a reinforcement against heavy seas). Portholes have been used for centuries to allow light and ventilation to enter the lower, darker levels of vessels and in some early cases, as a means of seeing out of a submersible. Portholes are watertight and are generally crafted from glass, secured within a metal frame that is then bolted to the vessel. The popular metals that are used to create the frame of the portholes are bronze and brass because these metals corrode less in saltwater.

MAS-F100109: BOAT
This find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth. Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.

MAS-F100110: POST
Heavily eroded and abraded timber fragment with marine borer and growth present. As it is so worn, it is difficult to tell what type of wood it is and whether this fragment was originally completely shaped and worked, or just partially worked to achieve its function. The timber does not exhibit any evidence or staining from fastenings, however, there is one hole that could have been a fastening point at some stage. It is thought that this fragment may be a broken post or groyne timber that has come from a beach rather than material relating to a wreck. Groynes are wooden barriers built at right angles to a beach to prevent the movement of material along the coast caused by longshore drift. They can be subjected to storm damage which results in them being broken and drifting out to sea. The possibility that this piece of wood derives from a vessel should not be ruled out, however. Shipwrecks represent an important part of our marine historic landscape and are important in understanding some of the most fundamental aspects relating to human past and experience.

MAS-F100111: AIRCRAFT COMPONENT
Aluminium aircraft section, heavily corroded and damaged. No identifying marks or plates visible, though two cross member plate remnants present. 870 x 45mm. The lack of identifying marks means that the type and origin of the aircraft cannot be definitively identified from this recovered section. Initially thought to be part of a piston engine support frame from something like a Spitfire fighter, a Dakota transport aircraft, or perhaps one of the multi-engined bombers,this theory was discarded as these are generally circular in section. The double row of rivet holes down one side (presumably where it attached to the skin) suggest it is more likely a stringer of some description. A stringer is a Longitudinal member (i.e. in the fuselage aligned with the longitudinal axis and in wings and tail surfaces perpendicular to this axis) which gives the airframe its shape and provides the support for the skin. In fuselages, they link frames and in aerofoils they link ribs. The consensus therefore, is that it is from the outer wing rib of a single engine aeroplane or the fin/tail plane rib of a larger multi engine aircraft from the Second World War; and has characteristics that suggest it is from a Royal Air Force or British aircraft. However, due to the corrosion and the very close variations in measurement between both metric and imperial measurements, i.e. millimetres (mm), standard wire gauge (swg) or thousands of an inch (thou), used by aircraft designers during this period, the use of the spacing and diameter of rivets, bolt holes and other spacings combined with any drilling/stamping errors means that these do not help in identifying the piece. The damage to the piece also means that the use of rivet pitch, which might identify the manufacturer, rather than the country of origin, would be open to a wide degree of error.

MAS-D100115: CARTRIDGE
Images of this find were sent to Trevor Parker of the Ordnance Society. He confirmed that these three shell cases belong to a six-pounder Hotchkiss gun. This particular type of gun was introduced in 1884 for use against torpedo boats. They were used during First World War on the Arethusa and early 'C' class cruisers and a few submarines as well as on Monitors M.15 through M.33. Originally French in origin, they were introduced to Britain in 1886 (Tucker 2013). Many were subsequently used as sub-calibre and saluting guns which meant that they were still available in 1939 (Naval Weapons, Naval Technology and Naval reunions webpage, accessed September 2017). Although these cartridges are empty, there is a good chance that their primers are live.The evidence for this is that they all have their primer protectors in place.These are three-legged covers that clip over the base and have a domed area in the middle that sits over the primer in the middle of the case bottom, to prevent accidental striking of the primer before it's loaded (War Office 2003). The edges of these clips are visible on all three cases and would have been removed before firing. This raises the question of where the shells have gone if they were not fired. The shells would have been held firmly in place therefore it has been suggested that these shell cases are of some age, dating back to the early 1900s, shortly after this type of gun appeared and that the actual shells have rusted away completely.

MAS-O100124: BRASS
One ornate brass piece. The piece has an aperture in the middle, in the centre of a circular disc which is itself recessed slightly into the surface. The disc extends laterally into two leaf-shaped limbs, which are decoratively styled and form curved arrows at their tips. At the end of each limb there is a circular hole, which was likely used to fasten the brass piece to its host object. These holes are countersunk, presumably to accommodate the heads of screws. The piece is approximately 90 mm in length, with a width of 40 mm and thickness of 2 mm. The diameter of the two larger holes on the limbs is 5mm approximately, and the diameter of the central hole is around 2-3 mm, with the central disc of the piece having a diameter of 4 mm. Whilst by no means certain, this object appears to be a fitting for an item of furniture. The recess around the central hole appears to be designed to accommodate the base of a circular or spherical/hemispherical object, suggestive of a handle or knob, while the two other holes are for securing the brass plate to the item of furniture. This, therefore, may be a bracket for a drawer or door handle on an item of furniture.

MAS-O100169: KNIFE
Double edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long. Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and only appears to be blade like.

MAS-D100138: CONTAINERS
Two shards of crockery with makers mark present. The stamp is made up of letters "H A P A G" and a stylised admiralty anchor which has a wooden stock behind a shield. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. The stamps would have been on the base of the corckery therefore it is not clear whether these pieces would have belonged to bowls or plates when they were in use. The shards are white, with dark flecked inclusions and yellowish patches. It is more than likely that these pieces were part of the vessel's everyday tableware.

MAS-D100146: UNIDENTIFIED OBJECT
Find consists of an ornate metal piece, bearing a flyr de lys type of design above a solid bar, presumably used for mounting. No dimensions were given, though it is suggested to be made from lead and H shaped, the finder described it as "part of a fireguard from the ship room". This material type would seem unsuitable for such a purpose, therefore it is still unclear what the purpose of this object is, although it is generally accepted that it is a decorative object of some sort.

MAS-D100173: CLOCK
This record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks. Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular aperture and a ridge running around its circumference. The verdigris corrosion on this item only affects one half of the object, suggesting that it has been partially protected whilst on the seabed. The remaining item is considerably more corroded, though it still appears to be made from a copper alloy. It comprises a hollow circle with a band dividing the central aperture in equal halves, opposite the end of this band are two circular fixing points with screw holes attached to the outside central circular element. The central band has a square hole in its centre, which is unlikely to be much more than 5 mm across. There is an additional element that obscures the upper half of the central circular element which cannot be accurately described from the object. The sixth clock part described by the finder is a flat copper alloy plate with a minimum of 18 holes drilled into it in addition to two square, one rectangular and one open rectangular aperture/s. At the top of the item is what appears to be a latch or clip. This object appears to be part of the mounting for the mechanism, and several of the drilled holes bear the shadows of where bolts and screws would have been attached. Most notably though is the inscription S Thomas, Thomaston C, US which can be observed. This refers to the manufacturer of the time piece, the Seth Thomas Clock Company, details of which are described in the next section. A square piece of glass is described by the finder as being the clock face associated with the clock parts described above. Consultation online with examples of clocks manufactured by S Thomas support this use for the glass, as some of their models do have square faces. The final object relating to clocks is a large oval ring of copper alloy which is described by the finder as the clock face from a grandfather clock. Its size, in comparison to the glass face, would certainly suggest it is from a different larger time piece. To the bottom right of the photograph it is possible to observe a hinge on the outside of the ring, whilst diametrically opposite a possible catch can be seen. These features suggest an opening element, presumably holding an oval glass clock face, may have attached to the recovered item. No other diagnostic features are immediately apparent from the photo provided.

MAS-D100174: CUTLERY
This record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or have had silver plating which can also corrode to a similar colour. There may be a hallmark or makers mark stamped on the back of the object that may shed more light on where it was manufactured. The date of this item is given by the wreck from which it was recovered, which sank in 1878.

MAS-D100175: SHIP FITTINGS
Two brass deck water filler plates and one ceramic door number (45). The water filler plates are 150 mm in diameter and approximately 100 mm thick. They are both heavily degraded and concreted, distorting their 'mushroom-shaped' original form. It appears they have screws running through the wider top surface and hanging down below next to the tinner plug interior. The screws are approximately 50 mm long and 5 mm in diameter. This type of ships fiitting is used to provide an access point by which to fill water tanks on a vessel and are common on many vessels, from pleasure craft to commercial vessels, up until the present. A hole would be drilled through the deck to accomodate the tube and the outer face of the plate would be flush with the deck, the central cap could then be unscrewed to allow a water pipe to be inserted and the tank filled. The plates are manufactured in a material, such as brass or stainless steel, is resistant to corrosion from sea water thereby protecting the rest of the pipework which would connect the pipe to the tank itself fitted lowr in the vessel. The ceramic door number is 50 mm in diameter, and in fair condition. The number '45' has faded, and the white ceramic has been stained yellow in places. Near the edges either side of the number there are two holes roughly 3.5 mm in diameter, used to secure the number plate in place. The exact use for this item is difficult to determine, as it could be cargo or more likely ship fittings. It may correspond to cabin door numbers, crew lockers or the like, its high quality finish suggests that it is unlikely to be part of the crew or operating areas of the vessel and therefore probably relates to the accomodation of the 100 or more passengers the vessel could carry.

MAS-D100177: TIMBER
Section of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships timber that has been exposed for at least part of its life on the sea bed.

MAS-D100178: TOOTHBRUSH
This find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secured. The condition of the brush is poor, especially the handle where the bone is heavily degraded. No markings are evident anywhere on the object. The brush is of a type used for cleaning teeth from the 17th through to early 20th century, closer dating is not possible without markings or further typological detail accessed March 2020).

MAS-O100179: ORDNANCE
This find consists of 12 lead balls varying in diameter between c. 15 mm and 21mm. All appear unfired and bear the mould lines and sprue marks from being hand moulded in a 2 part mould. The balls themselves are in fair condition, though some bear concretion/encrustation. Images of the finds were sent to Charles Trollop, an expert in historical ordnance, who advised that in all likelihood these are English Standard Musket (0.775 " or 19.79 mm) and Carbine (0.615 " or 15.64 mm) Balls. These standards relate to most of the black powder/smooth bore period from the 17th to 19th centuries.

MAS-D100183: UNIDENTIFIED OBJECT
Find comprises of a single length of copper or copper alloy wire, measuring approximately 140 mm long and 10 mm in thickness. The wire consists of a central core of copper alloy strands, which are then wrapped or sheathed in a strand of copper alloy tightly wound around the core. The wire appears to taper towards one end, though it is not clear if this part of its manufacture or damage occurring to it during its use or post deposition on the seabed. The function of this item, clearly incomplete as evidenced by its severed ends, is unclear. Its finding was recorded as being in close proximity to a swivel gun (MAS-D100180) and it is possible that its function related to the use or maintenance of the weapon. It would seem unlikely that it functioned as a cable, due to the use of copper alloy which is not known for it tensile strength. Similarly, though copper is used extensively in modern electrical wiring, the date of the associated Brandy wreck would preclude its use within electronics. Of course this find may be intrusive and not relate to the wreck at all. One further consideration is the possibility it is a fragment of a lightning rod that may have been fitted to a ships mast for protection during and electrical storm at sea.

MAS-D100184: UNIDENTIFIED OBJECT
A single piece of copper alloy sheeting, measuring approximately 70 mm by 55 mm with a thickness of c. 2 mm. The item bears 4 grooves pressed into the metal along the long axis on one face, only one of which is evident on the opposite face. The item appears to be distorted from its original shape, all the edges appear intact suggesting it is otherwise complete. The function of such an item is unclear, though it was recovered in close proximity to a swivel gun (MAS-D100180) and may relate to the functioning of such a weapon in some way.

MAS-D100180: CANNON
This item appears to be a small calibre black powder weapon, such as a swivel gun, commonly mounted on vessels throughout the age of sail as well as being used in terrestrial settings. The weapon is approximately 750 mm in overall length, with external muzzle diameter of approximately 110 mm flaring to an external diameter of 180 mm at the breech end. The condition of the artefact is poor due to heave concretion, though visual analysis suggests it is a muzzle loading gun. No Trunnions for mounting the weapon are immediately apparent despite the concretion. As their name suggests, swivel guns were small cannons mounted on iron staves or sticks so that the point of aim could be quickly and easily changed. They are essentially close in defence weapons, designed to be fired over short distances to deter attempts to board the vessel which they are defending. Commonly the ammunition used would be cannister, a small case packed with musket balls or the like, which upon firing would spread out in a cone potentially hitting multiple targets. Such a weapon would be particularly effective against small boats or boarding parties where large numbers of enemies would be packed together.

MAS-D100181: TIMBER
Find consists of two sections of timber or wood. The first measures approximately 1650 mm in length, 85 mm in width and 90 mm in depth. There are no diagnostic elements visible upon the timber, such as tool marks or fixing points, and therefore its function remains unknown. It does, however, appear to be faced and is therefore unlikely to be a piece of natural driftwood. The second piece of wood measures approximately 196 mm in length and 20 mm in width. There is at least one possible nail hole visible and again it appears to have been faced or worked by human hands. It is heavily degraded and this, coupled with a lack of diagnostic details, preclude any comment on its original function or use. Both pieces of timber appear to have been at least prepared for use by human action, though how they came to be in the sea or when is unknown at this point. It may be that they relate to ships timbers, originating from a wreck or discarded overboard, part of shoreline installations, such as a pier or jetty, or simpley be lost cargo from a ship carrying timber as cargo. The nail hole in the second piece suggests that this has been used and is therefore unlikely to be cargo, whereas the lack of bolt holes or othwer fixings on the larger timber may suggest the opposite. The fact that the larger timber was photographed with with a swivel gun (MAS-D100180) may indicate that it was recovered from the same area on the seabed.

MAS-O100189: NAIL
The find consists of 8 iron nails and an unidentifiable object that contains one further nail and is made of, or covered in, what appears to be fur. The nails range in length from 135 - 175 mm, and c. 10 - 20 mm in width at their widest point below the head. All 8 nails have a rose type head and taper to a broad point. These features suggest that the nails were hand wrought, rather than cut or wire, a method where each nail is manufactured individually by hand on a blacksmiths anvil. The invention of the slitting mill c. 1590 simplified this process by manufacturing iron rods from which nails could be cut, tapered and given a head. Between 1790 and 1820 this process began to be replaced by machine cut nails, before eventual replacement by wire nails in the late 19th century. These nails, therefore, likely date from before the mid-19th century. The level of preservation of iron objects in an intertidal environment also suggests that they are likely to be more recent than the 1590 development of the slitting mill, a date of mid-18th to mid-19th centuries is tentatively suggested. Images of the other object were sent to in-house finds secialist and animal bone specialist at Wessex Archaeology who both said it appeared to be animal skin that had been bundled up but could not tell what it was for. As the object has no readily diagnostic features, it remains unidentifiable.

MAS-D100190: CONTAINERS
This find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and that the figure is actually holding a mug of ale. It should have a hole in the bottom where the cork would have been placed once filled. As this figure was found in isolation, it is not clear whether it was part of the sunken vessel's cargo, a posession of the crew/passengers, a mess item, or an object discarded/lost over an earlier wreck site by chance.

MAS-D100191: COIN
This find comprises of a single gold coin from the USA with a value of $10. This 1847 minted coin was created for standard circulation and measures 27 mm in diameter with a weight of 16.72 grammes, the coin is minted in an alloy of 90% gold and 10% copper. It is of a type known as a Coronet Head - Eagle, based on the depictions on each face. The head side shows a side profile of lady liberty wearing a coront inscribed with the word "LIBERTY", the obverse bearing a spread eagle with a crest upon it and the words "UNITED STATES OF AMERICA TEN D." inscribed around the circumference of the coin. The edge of the coin is finished with a pattern known as reeding. A total of 862,258 of these coins were minted in 1847 and these are considered to be of high value due to their rarity. Another batch of coins was produced in the same year but bear the letter O below the eagle on the obverse face (https://en.numista.com/catalogue/pieces16125.html accessed 10 March 2020). The engraving of the master coin was carried out by a Christian Gobrecht and the coins were minted in Philadelphia accessed 10 March 2020). It is not clear why the SS Pomerania was carrying such a coin, though the vessel carried passengers between Europe and the United States. It may have belonged to a passenger, although as the vessel was en route to the USA this would have required changing currency prior to departure. Alternatively it may have belonged to a crew member or the vessel itself for purchasing supplies and the like whilst in US ports.

MAS-D100192: PERSONAL ACCESSORY
One gold T piece to believe part of a watch chain. These pieces were used to fasten the watch chain to an item of clothing, most often a wasitcoat. The T piece has a rounded embossing in the centre of the strip, with a small ring attached at this point for attaching the piece to a chain. The right end of the piece has a single ringed pattern shortly before terminating in a straight clean end. The left side of the piece has steps from the thicker piece to a thinner section extruding out a short distance. Given the date of sinking of the vessel from which it was recovered this item can reliably be dated to the middle of the 19th century.

MAS-D100193: ENGINE
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side approximately 25 mm from the upper edge. This circular aperture, with the lug at its centre, has a diameter of c. 95 mm. The interior of the object is not recessed beneath the edges of the aperture and therefore forms a a solid shape between the solid and open faces, conforming to the circumference of the aperture. The solid face, presumably forming the rear of the object, is approximately 6 mm thick. The outline of what may be a screw hole for affixing is visible 3 - 4 mm from the top edge just to right of centre on the solid face. The object has 3 closed and one open side, where the circular aperture flairs outwards. Of the closed sides two are straight, running at right angles to the opens side, with the remaining closed side opposite the open side being slightly curved. This slightly more aesthetically pleasing element may indicate that this is in fact the top edge of the object. The intended function of the item is not immediately apparent, though clearly something is intended to either run through the object or pivot around the central lug. Though no firm identification has been established the suggested functions include a bearing case, a rail mount, a hinge pivot or a cable relay.

MAS-D100194: BOWL
One complete round bowl with a diameter of 241.3 mm and one part of a broken plate, both displaying the markers mark. Both pieces of ceramics have dark coloured decorative bands running around the outside and inside rim and have fractal cracks present. The white ceramic also has brown blemishes in places, but overall is in fair condition. The symbol crest in the centre of the bowl is a shield with "H.A.P. A.G" inscribed, overlying an anchor. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. It is more than likely that these pieces were part of the vessel's everyday tableware.

MAS-D100196: CLAY PIPE (SMOKING)
Five small smoking pipes that are complete, four small smoking pipes that are broken, one large smoking pipe that is complete, six large smoking pipe that are broken. The pipes are mainly derived from two different styles: the long-stemmed style and the short-stemmed. The longer-stemmed bears no decoration or cartouche, along with absence of heel. The bowl is large, owing perhaps to the fall in tobacco prices in the 19th century and would have most likely been a cheap item. The shorter-stemmed pipes display ornate decoration on the bowl, in the form of a hatted head, and are made from darker clay. The bowls are at a sharper angle to stem, nearly 90 degrees in most cases. The male head on five of the pipes have previously thought to represent a military figures or the head of a French soldier. They fall into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, common in the late 19th and early 20th centuries. Such decorative pipes would have been commonly exported and it is believed that all of these pipes represent a vessels cargo.

Six glass gin bottles. 'Case gin' or 'taper gin' bottles have a square cross section that means that packing became more effective than with round bottles. The bodies taper wider towards a sharp shoulder, short neck and a champagne finish. The bottles are olive green in colour, and are in a fair condition despite encrusting towards the neck. This shape and style of bottle originated in and was commonly made in Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later and may therefore be earlier 19th century (https://sha.org/bottle/liquor.htm#CaseGinbottles accessed January 2019).

Find consists of a fragment of a porcelain cup, representing about 1/4 - 1/3 of the total vessel including a complete base bearing a backstamp of BRYONIA U & C. Though only partially surviving, what remains is in fair condition with evidence of slight encrustation around the base. No scale was provided, however, other examples of this pattern and manufacturer have a diameter of c. 75 mm. The U & C inscription refers to Utzschneider & Co, a company based originally in Sarreguemines, North East France. This region was previously part of Alsace-Lorraine and therefore the manufacture of this vessel would have likely have been in Germany. The company name existed between 1800 and 1919 and therefore this vessel likely dates to the later part of this period due to the date the ship from which it was recovered sank. The pattern on the cup is known as Black Mulberry Bryonia Pattern, to which the BRYONIA inscription refers.

MAS-O100203: HANDAXE
Images of this find were sent to Andrew Shaw, flint specialist at Wessex Archaeology who determined that this object is an ovate biface handaxe that is in mint condition. This example is approximately 50-60 mm in width and 80-100 mm in long-axis. He said that the form of the butt and lateral margins are reminiscent of late Middle Palaeolithic handaxes, and it's possible that deposits of that age may be found in the intertidal and offshore zone in. Based on the images alone, he said that it's possibly a late Middle Palaeolithic handaxe dating from between 60,000 to 30,000 years ago. Handaxes are the longest used tools in human history, used for cutting, digging and hunting. This artefact exhibits bilateral symmetry with a pointed tip and rounded base.

MAS-D100205: TOBACCO PIPE
Complete example of a clay tobacco pipe of the bent billiard style, probably dating to the 19th century. Overall length of 80 mm, with the stem being 50 mm in length. The "short stem" is circular in profile at the heel, changing to a hexaganol profile 20 mm from the mouth piece, which bears beading around the aperture. The left hand side of the stem, from the users perspective, bears a cartouche comprising an embossed diamond lozenge in turn enclosing an incised inscription of SQUATTERS OWN. The opposite side of the stem bears an identical lozenge enclosing the incised word SYDNEY. The bowl is approximately 35 mm in height, from base to mouth, with the mouth having an exterior width of 25 mm on the long axis. the shape of the bowl is slightly rounded on the outside, with no evidence of flatenning of the heel. The clay fabric is of an off white or ivory colour with a smooth satin like finish. The inscription "Squatters Own" refers to a series of pipes manufactured solely for the Australian market in England, sometimes also referred to as "Squatters Own Budgaree" or "Squatters Bungaree" (Budgaree/Bungaree is derived from Aboriginal languages, meaning good). Though uncertain, these pipes were probably manufactured in Rainford at the Hill Top Pipe Works, run by David Swallow, though other manufacturers in Scotland and elsewhere in England may have subsequently copied this style (Gojack and Stuart 1999). Examples of these pipes have not been found outside Australia and New Zealand other than at the Rainford works and one unusual example of two fragments recovered in New Jersey (Springate 2010). Examples of these pipes often exhibit narrow bowls with intricate designs, known as effigy pipes, this example has a fuller and larger bowl without an effigy however.

MAS-D100206: BOTTLES
This find comprises of four stoneware bottles with the inscription "A PHILLIPS VICTORIA VI" and one stoneware ink bottle inscribed "BLACKWOODS" bearing a pouring lip. All vessels are constructed in a cream stoneware ceramic with a clear glaze. The four A PHILLIPS bottles are approximately 220 mm in overall height (150 mm from heel to sharply angled shoulder), with an exterior diameter of 80 mm in the body and 30 mm at the finish. The finish is of a type known as an applied finish, from glass bottle construction where an additional strip of glass is applied around the rim of the bottle, in this case this ring was likely to have been part of the mould in which the bottle was manufactured. The body is cylindrical with a sharp angle at the shoulder, with the constriction above the shoulder being straight before curving into the short neck immediately beneath the finish. the vessel in the photo is of good condition with one small chip at the base. The ink bottle is approximately 180 mm in height (120 mm from heel to sharply angled shoulder), with an exterior diameter of 80 mm in the body, 30 mm at the neck and 45 mm at the flared finish and pouring lip. The neck bears two horizontal beaded rings <5 mm thick, approximately 10 mm apart and 15 mm below the flared finish. The body is cylindrical with a sharp angle at the shoulder, with the constriction above the shoulder being slightly concave as is curves into the short neck.The vessel is in moderately good condition, though there is some cracking of the glaze evident and a small amound of encrustation around the base. Dating of these vessels, based on the known operating period of the companies inscribed upon them, is likely after 1858 (A Phillips arrives in Victoria), but prior to 1871 when the patent of Blackwoods bottles and change in form is likely. This is predicated on the vessels being from the same wreck. The A PHILLIPS inscriptions refer to the Pioneer Syrup, Soda & Cider Works established by Alexander Aaron Phillips of Victoria, British Columbia after 1858. Mr Phillips is the first recorded Jewish resident of Victoria (http://www.jmaw.org/phillips-victoria-jewish-bc/ accessed January 2019). The vessels presumably predate the 1881 change of the business name to A Phillips and Son. No record of where these vessels were produced could be found, though given the large quantities of stoneware vessels exported to Canada and the USA from Great Britain in the mid-19th century it is possible these were being exported to Canada for Mr Phillips. The other bottle, though the inscription is only partially visible in photo, appears to be an ink bottle from ink manufacturer Blackwood & Co, London. This company appears to have existed from at least 1851, based on an advertisement in the 4th November 1851 issue of The Times. In 1856 the company patented their design of pouring ink bottle, and again in 1871, with the later examples bearing the words "PATENT SYPHON" immediately below the company name. That this inscription is missing from this vessel, that the patented vessels bear a more pronounced and elongated lip, along with a small hole in the rear of the neck opposite the spout, implies this particular example predates 1871.

Long necked glass bottle in clear or aqua marine glass. Overall height of 210 mm from base to finish, the height of body from base to shoulder being 120 mm. The finish being of the applied style, bearing a ring of glass approximately 15 mm wide over a further ring extending a further 5-10 mm down the neck. The base of the vessels exhibits a slightly concave punt <10 mm deep. In profile the body appears to be of a flattened hexagon shape, approximately 70 mm wide. the largest pane of the hexagonal shape being 45 mm across. The contraction from body to neck is severe, narrowing to 30 mm in only 10 mm of height, the contraction being convex in shape. The exterior of the neck is 30 mm wide at its base, tapering to 20 mm where it meets the finish. the finish being approximately 25 - 30 mm across. The body bears the inscription of C & B embosed near the base of the largest pane of the hexagon. The intended use of the vessel is unclear, being of a fairly unique design, and may relate to medicinal products or possibly the bottling of gin. No exact details of the company or product to which the logo C & B relates can be ascertained at this time. As it was found with mid to late 19th century finds, it implies a probable date of this period. The verall condition is good as the vessel is complete, though there is soe evidence of encrustation along one side of the body.

MAS-D100219: VALVE
One small brass expansion valve. It is wheel operated from two opposite ends, roughly 260 mm apart. Approximately 50 mm in from each wheel there is a piped connection with the pipes roughly 25 mm diameter and both kinking into a right angle. Between the two wheels and the pipe connection, at the centre of the expansion valve, is a large metal boss, possibly where the two ends were fixed together. Item is heavily corroded and in poor condition.

MAS-D100220: VALVE
Two small brass valves and one small double valve. The first item has three conections, with two sections of thinner pipe (10 mm diameter approx) still attached perpendicular to threaded fixing, and both twisted. The thicker pipe (38 mm approx) runs parallel and opposite to threaded fixing. In all cases the rest of the pipes have sheared off. The second valve is similar in characteristics to the first, with three connections and a threaded fixing. This valve is slightly smaller and less encrusted, and only one section of thin (10 mm approx) pipe attached perpendicular to threaded fixing. Both valves have quite spherical central sections. Third valve is a double valve, with only one connection perpendicular to threaded fixing and wider second connnection (100 mm approx) opposite and parallel to threaded fixing. This item is heavily encrusted so unsure as to accuracy of interpretation. Both are heavily corroded and in poor condition.

MAS-D100221: VALVE
One brass stopper and one brass valve. The valve has spherical central body, with three different piped connections conjoining at right angles, each indentical in style; circular and 30 mm long, with a 180 mm approximate diameter. It is wheel-operated, with the wheel shaft thinner than the piped connections at 25 mm, before expanding to a larger shaft with diameter of 65 mm. The condition of the valve is heavily corroded and encrusted with metal growths. The stopper is in a similar condition, although one nut and bolt at its centre appears to be in fair condition.

Bordeaux style bottle manufactured in clear aquamarine coloured glass, though weathering has caused the colours to distort and becom pearlescent towards the base of the vessel. It has a wide and straight neck and is finished in the applied ring or champagne style. The body is cylindrical, with low profile rounded shoulders. The height of the bottle is approximately 230 mm, the diameter of the body 60 mm and the neck 30 mm. Though this bottle is smaller than the more common 300 mm tall, 750 ml wine bottles it is most likely a wine bottle. It's clear colour suggests a dessert or sweet wine, at the very least a vessel for white rather than red wine.

This copper alloy valve has a spherical central body with three sperate connections. One of the connections has a 25 mm long male thread evident, whilst the remaining two are concealed by concretion. One of the connections is probably a female thread entry and the third of the connections an elbow pipe union. The diameter of the connections is approximately 30 mm. Overall dimensions are approximately 100 mm by 100 mm. The exact purpose of such a valve is not immediately apparent, though it likely relates to the vessels' operation and machinery rather than any cargo. As a coal powered steam vessel it may relate to the steam system employed or, probably more likely, relates to management of water around the vessel.

Four pieces of hand-decorated tableware. There are two bowls of 75 mm diameter and 55 mm high. The other two pieces are two pearly white plates with 122 mm diameter. They probably belong to the cargo or tableware of the wreck SS Strathclyde that sank in 1876 thereofre can be dated to the end of the 19th century. Any stamps or markings on the base of the tableware would give more inidcation as to the location and date of manufacture.

Three bottles of blown glass. The frst two bottles are torpedo or Hamilton´s type bottle (Hamilton introduced this type of blow molding) from the mid-nineteenth century dedicated to containing carbonated water or 'soda'. Both are light blue/green 'aqua' glass and measure 250 mm long and have a diameter of 75 mm with a 'bottom-weighted' blob finish. The inscription "Aerated Water" "Bombay" makes reference to the content and place of distribution, something that manufacturers of this type of packaging commonly did. The design ensured that the bottles would be stored on their side, keeping the cork in contact with the liquid and thereby preventing it from drying out and allowing the gas to escape. The third of the bottles is a small light blue/green 'aqua' glass container, hexagonal in shape and measuring 75 mm in high by 45 mm in diameter. This would probably be a small ink bottle. This style of bottle was very popular around the middle of the 19th century from around 1835 to 1865 (Covill 1971).

Brown ceramic bottle with a glazed surface. It was intended to contain gin of Dutch origin. The bottle measures 310 mm long and has a diameter of 85 mm with a ring type handle on the neck of the bottle. The bottle is printed with the phrase 'WYNAND FOCKINK' 'AMSTERDAM'. In Amsterdam, Wynand Focknik has been making distinctive hand-crafted liqueurs and jenevers (Dutch gin) since 1679 (Greenberg 2012). In the 17th century, when the Dutch East Indiaman ships brought herbs, spices and sugar to Amsterdam, distillers started distilling liqueurs on a large scale. The city had become very prosperous and liqueur, contrary to beer and genever, was an expensive drink which only the rich could afford to drink on a regular basis. When in 1724 Wynand Fockink acquired the distillery and the bar in the Pijlsteeg dating back to 1679, Amsterdam was still a rich and prosperous city with a thriving liqueur industry. Under Wynand Fockink and his descendants, the liqueur distillery became one of the largest Dutch distilleries. By the end of the 18th century the company owned six large premises on the Oudezijds Voorburgwal and another six in the Pijlsteeg. In the first decade of the 19th century the company expanded through export as well which could explain why these bottles were found on a vessel bound for Bombay. By the 19th century, Wynand Fockink owned trading houses in Berlin, Vienna, Brussels and Paris and between 1815 and 1860, France was one of the largest liqueur customers. The Wynand Fockink distillery in Amsterdam is still open today (http://wynand-fockink.nl/tasting-tavern/history).

MAS-D100232: INK BOTTLE
Four small stoneware cylindrical ceramic inkwells. The ceramic is made of a light brown paste with a salt-glazed surface. The dimensions are 45 mm in diameter by 50 mm high. This type of inkwell was commonly known as a "penny ink" bottle. They were corked, sealed with sealing wax and cost a penny each. They contained writing ink. This type of ink bottle was introduced in the mid-19th century and were superseded by glass bottles by the first decade of the 20th century. Small ink bottles or wells were usually no more than four inches high and did not have a pouring spout like the master bottles as they were intended to be dipped into (Hume 2001). These ink bottles came in two main varieties; very squat cylinders or wide-based cones.

This find appears to be some form of decorative finial manufactured from a non-ferrous metal, possibly a copper alloy. It measures approximately 356 mm in length, 102 mm in width at the base and 127 mm in width at the widest point just below the top of the object. The base appears to be damaged, though clearly separates into three possible legs or feet. Approximately 76 mm from the base it seems to narrow slightly, possibly due to bearing a ring decoration, though this is difficult to ascertain due to the level of encrustation on the object. The shaft of the item extends for a further c. 76 mm before expanding to a Doric column style embellishment of three gradually expanding rings, the uppermost having rounded edges. Above this is an elaborate styled decoration with six radially arranges loops, coming to a point in the centre. The intended use of the object is not evident from the available information and it is not clear whether this was cargo or part of a vessels fittings. Suggested uses include a fire dog or part of a fireplace, decorative finial of some description. In terms of date the style appears to be 19th century or later and, given that it comes from a wreck dating to 1878 this seems most likely.

MAS-O100234: BARREL
This find comprises of the remains of three to four wooden barrels, which were buried in the intertidal sandy substrate of a pleasure beach. The action of the tide revealed the barrels and it is unclear how much of the barrels remain. End of the staves, lengths of timber making the sides of the barrel, are visible and clearly degraded. In some cases these give the appearance of flaring outwards, implying that only the lower portion of the barrel remains. At least one barrel exhibits inwardly projecting staves, suggesting more than half of the barrel remains. There is some evidence for the remains of posts protruding from the barrels which otherwise give the appearance of having been filled with sand and stone. The term cask is also used to describe barrels specifically intended for the storage of liquid, most commonly alcohol such as wine and beer. It has not been possible at this stage to ascertain the exact size and type of the barrels comprising this find, though it is estimated that they are of a small to medium size such as a Rundlet or Tierce. What the barrels were originally used for is not readily discernible, though it does appear that they have been repurposed for another function. The presence of posts within the barrels and their relative positions, laid out in a rough rectangle, suggests they used to accommodate foundation posts of a possible structure. This may have been a simple platform for bathers or anglers or something more complex such as a temporary jetty or pontoon. An image, submitted by the finder, dating to the 1850s shows structures in approximately the same position as the barrels, which may indicate the structure previously supported by the barrels. Alternatively they may relate someway to the practicing for the D-Day Landings in Normandy, which incorporated the beach and construction of landing pontoons. It has not been possible to firmly date this find from the available data, but given their condition and the preservation of the timber elements a more recent, post-medieval, date is tentatively suggested.