2026-10-15T03:53:48+01:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results33210finds-169169MAS-O100169KNIFEPOST MEDIEVALDouble edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long. Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and only appears to be blade like.Tools and equipment3641026/183MAS2017-10-15T00:00:00Zcutting equipmentWith finder2018-01-20T18:52:51Z2020-03-26T16:22:12Z16902527018275PAS5C50379B001E6C225469Isle of WightSZ428050.61820269-1.40768541blesses.recline.numeral10MAS MASMASIron11019IncompleteConcretedPOST MEDIEVALx41047MODERNx41047Coastal walking169_20180205_150952.jpg409images/MASRobbie Trevelyan2024-10-09T14:16:52.989Zfinds-134134MAS-D100134HANDLEPOST MEDIEVALThe stem of a silver fork or spoon with a hallmark pattern. The set of four hallmarks located together on the piece of cutlery indicates it was made later than 1781, when this practice was first introduced. Based on this image, this type of spoon/fork is possibly a Fiddle pattern - this refers to the shape of the handle - and is a type introduced in the 1780s and still in production today. The Fiddle pattern means that there are shoulders on the stem near the bowl, which is seen on this example. The lower end of the stem juts out around 90 degrees but this example may have been worn down in the marine environment. Dominant throughout the nineteenth century, Fiddle pattern is the most commonly found pattern from the 1800s. Originating in France, it first occurred in England from the 1760s without the shoulders on the stem near the bowl. The most common Fiddle pattern variants are Fiddle & Thread and Fiddle, Thread & Shell. The production of plain Fiddle pattern ceased around the time of World War One (https://www.antiquesilverspoons.co.uk/spoon-info accessed January 2018).This item was found with one stoneware salt glazed jar​ ​(MAS-D100132), two clear glass fruit bottles, one ornate green glass wine bottle, one black glass bottle, one tall wine bottle brown glass hexagonal at base (MAS-D100133) and three ceramic bottles (MAS-D100156)​.FOOD PREPARATION AND CONSUMPTION36411316/173MAS2017-10-18T00:00:00ZCUTLERYWith finder2017-10-23T17:13:40Z2020-03-30T14:05:38Z134122282115PAS5989C577001EA7PAS5989C577001EA72MAS MASMASSilver11728IncompleteFairPOST MEDIEVALx41047MODERNx41047DivingSubmitted as wreck to the Receiver of Wreck156_IMG_3565Large.JPG361images/MASLR2024-10-09T14:16:43.861Zfinds-124124MAS-O100124BRASSPOST MEDIEVALOne ornate brass piece. The piece has an aperture in the middle, in the centre of a circular disc which is itself recessed slightly into the surface. The disc extends laterally into two leaf-shaped limbs, which are decoratively styled and form curved arrows at their tips. At the end of each limb there is a circular hole, which was likely used to fasten the brass piece to its host object. These holes are countersunk, presumably to accommodate the heads of screws. The piece is approximately 90 mm in length, with a width of 40 mm and thickness of 2 mm. The diameter of the two larger holes on the limbs is 5mm approximately, and the diameter of the central hole is around 2-3 mm, with the central disc of the piece having a diameter of 4 mm. Whilst by no means certain, this object appears to be a fitting for an item of furniture. The recess around the central hole appears to be designed to accommodate the base of a circular or spherical/hemispherical object, suggestive of a handle or knob, while the two other holes are for securing the brass plate to the item of furniture. This, therefore, may be a bracket for a drawer or door handle on an item of furniture.3641320/173MAS2017-09-08T00:00:00Z2017-09-11T19:19:58Z2020-03-27T15:02:05Z12424090174115PAS5C5037EF001C032SW822050.04012553-5.04588056loaning.rounds.drifters6MAS MASMASCopper alloy10627CastCompletePOST MEDIEVALx41047MODERNx41047Diving124_IMG_01.jpg324images/MASPT2024-10-09T14:16:41.294Zfinds-110110MAS-F100110POSTPOST MEDIEVALHeavily eroded and abraded timber fragment with marine borer and growth present. As it is so worn, it is difficult to tell what type of wood it is and whether this fragment was originally completely shaped and worked, or just partially worked to achieve its function. The timber does not exhibit any evidence or staining from fastenings, however, there is one hole that could have been a fastening point at some stage. It is thought that this fragment may be a broken post or groyne timber that has come from a beach rather than material relating to a wreck. Groynes are wooden barriers built at right angles to a beach to prevent the movement of material along the coast caused by longshore drift. They can be subjected to storm damage which results in them being broken and drifting out to sea. The possibility that this piece of wood derives from a vessel should not be ruled out, however. Shipwrecks represent an important part of our marine historic landscape and are important in understanding some of the most fundamental aspects relating to human past and experience.ARCHITECTURE36411220/173MAS2017-08-23T00:00:00ZARCHITECTURAL ELEMENTWith finder2017-08-23T08:45:04Z2018-05-08T08:39:55Z110180720114281314PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPoorPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081719.JPG284images/MASABB2024-10-09T14:16:37.773Zfinds-107107MAS-F100107TRANSPORTPOST MEDIEVALThis ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor. The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee. The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.SHIP36411224/173MAS2017-08-23T00:00:00ZTimberWith finder2017-08-23T08:34:54Z2018-05-23T13:57:54Z10711012083011428114PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081739.JPG262images/MASABB2024-10-09T14:16:36.896Zfinds-4848MAS-D100048CUPNINETEENTH CENTURYEleven teacups measuring 4 inches x 3 inches in size. The cups have a Chinese style design with a light grey colour pattern, and appear to be made of porcelain (although this has not been confirmed). Similar in decorative style to the bowls recorded as MAS-D100047, it is assumed that these teacups were made by either Charles Meigh of Hanley, Staffordshire (1835-49), the preceding company, J. Meigh and Son (c.1805-34), or the succeeding company, Charles Meigh and Son (1851-61) (Godden 1964, 428-429).These items were found along with four milk jugs of a similar style (MAS-D100054) and were recovered from the wreck of Josephine Willis. Other items similar in style to the ceramic recorded here have also been recovered on different occasions from this wreck site (MAS-D100047, MAS-D100058 and MAS-D100059) along with other non-ceramic objects including candlesticks, a deadeye and three square portholes. The Josephine Willis was a New Zealand sail and steam propelled packet ship built in c.1840. The ship was carrying 110 people on board bound for Auckland, comprising ten First class passengers, 60 steerage and 40 crew. It sank in 1856 following a collision with Mangerton with the loss of 69 lives. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Josephine Willis.CONTAINER363918561121/173MAS2017-06-04T00:00:00ZROUNDED CUP1025695Kent HER Number: TR 22 NE 45With finder2017-06-04T14:40:20Z2017-09-26T13:21:29Z48115284215PAS57C96ECD001E82PAS57BC21F300115B218210KentTR183051.02800971.10748152immature.twang.uncouth10MAS MASMASCeramic10539CompleteGoodPOST MEDIEVALx41047NINETEENTH CENTURYDivingSubmitted as wreck to the Receiver of Wreck48_6btxqbz9feyo.jpg158images/MASABB2024-10-09T14:15:15.226Zfinds-4545MAS-D100045BOTTLEPOST MEDIEVALBase of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.FOOD AND DRINK SERVING CONTAINER36361120/173MAS2017-05-17T00:00:00ZCONTAINERWith finder2017-05-30T11:34:20Z2020-02-28T15:54:03Z4511828115PAS57C96ECD001E82PAS57C96ECD001E82214362DorsetSZ058050.61968642-1.93068328princely.meaning.pulps10MAS MASMASGlass10879FragmentPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of WreckOnionbottle1.JPG150images/MASABB2024-10-09T14:15:14.327Zfinds-4040MAS-D100040BOTTLEPOST MEDIEVALOne onion bottle dated to c.1700. Glass onion bottles were large hand-blown glass bottles, used aboard sailing ships to hold wine or brandy. For increased stability on rough seas, the bottles were fashioned with a wide-bottom shape to prevent toppling. Between c.1690 and c.1720 the outline of a wine bottle resembled an onion - a wide compressed globular body and a short neck (Robinson and Harding 2015). Most bottles before 1700 had a ring of glass just below the neck that gave anchorage to the string used to hold in variety of stoppers. The Dutch bottles usually had a longer neck than the English ones and featured a flat wraparound rim, while the English bottlenecks had an applied collar or laid on ring (Polak 2016).This item was found along with a large round jug (MAS-D100052) and were recovered from the Goodwin Sands, Kent.Container36361091/173MAS2017-05-23T00:00:00ZFood and liquid storage containerWith finder2017-05-23T19:42:07Z2017-10-04T09:49:26Z401182841415PAS5989C577001EA7PAS57BC21F300115B2MAS MASMASGlass10879BlownCompletePOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of Wreck40_IMG_02.jpg137images/MASLR2024-10-09T14:15:13.095Zfinds-5252MAS-D100052JUGPOST MEDIEVALOne badly damaged ceramic jug with marine encrustration. The vessel is probably stoneware, but possibly glazed redware as there appears to be the characteristic 'orange peel' texture of salt-glazed stoneware visible in the photo, with the 'reeding' that you get round the rims of stoneware vessels. If this is the case it is almost certainly German in origin. The rounded shape would place it somewhere in the second half of the 16th century or first half of the 17th century.This item was found along with an onion bottle (MAS-D100040) and were recovered from the Goodwin Sands, Kent.CONTAINER36361091/173MAS2017-05-23T00:00:00ZDRINK SERVING CONTAINERWith finder2017-05-23T19:42:07Z2017-10-03T14:03:20Z52120282315PAS57C96ECD001E82PAS57BC21F300115B2MAS MASMASStonewareIncompletePoorPOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of Wreck40_mz32qhebl0cg.jpg138images/MASABB2024-10-09T14:15:16.205Zfinds-3838MAS-D100038BOTTLEPOST MEDIEVALFour glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - these examples therefore probably date to the 19th century, but pre-dating the 1880s.This item was found along with an ivy leaf teacup (MAS-D100051).FOOD AND DRINK SERVING CONTAINER36391090/173MAS2017-05-21T00:00:00ZWINE BOTTLEWith finder2017-05-21T14:02:28Z2017-09-26T13:13:09Z38418284115PAS57C96ECD001E82PAS57BC21F300115B218210KentTR233651.079963081.18236287petty.jetting.hazy10MAS MASMASGlass10879CompleteFairPOST MEDIEVALx41047NINETEENTH CENTURYx41047DivingSubmitted as wreck to the Receiver of Wreck38_az9rlbhpze9s.jpg131images/MASABB2024-10-09T14:15:12.611Z