2026-10-15T00:20:40+01:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results3120finds-193193MAS-D100193ENGINENINETEENTH CENTURYUnidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side approximately 25 mm from the upper edge. This circular aperture, with the lug at its centre, has a diameter of c. 95 mm. The interior of the object is not recessed beneath the edges of the aperture and therefore forms a a solid shape between the solid and open faces, conforming to the circumference of the aperture. The solid face, presumably forming the rear of the object, is approximately 6 mm thick. The outline of what may be a screw hole for affixing is visible 3 - 4 mm from the top edge just to right of centre on the solid face. The object has 3 closed and one open side, where the circular aperture flairs outwards. Of the closed sides two are straight, running at right angles to the opens side, with the remaining closed side opposite the open side being slightly curved. This slightly more aesthetically pleasing element may indicate that this is in fact the top edge of the object. The intended function of the item is not immediately apparent, though clearly something is intended to either run through the object or pivot around the central lug. Though no firm identification has been established the suggested functions include a bearing case, a rail mount, a hinge pivot or a cable relay.This item was found with pepper pot (MAS-D100190).TRANSPORT3941118/183MAS2018-06-03T00:00:00ZVESSEL COMPONENTWith finder2018-06-21T20:58:32Z2020-03-26T13:10:03Z1021935111417415PAS5C5037EF001C0322625East SussexTV768950.674056230.48951592undersigned.participation.rapidity10MAS MASMASCopper alloy10627CompleteNINETEENTH CENTURYMODERNDiving193_193_IMG_01.JPG465images/MASPT2024-10-09T14:16:59.013Zfinds-106106MAS-F100106LADDERNINETEENTH CENTURYThese two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut. Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.Tools and equipment39411222/173MAS2017-08-23T00:00:00ZCompanion ladderWith finder2017-08-23T08:31:10Z2018-05-08T08:40:53Z10621428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081767.JPG254images/MASABB2024-10-09T14:16:36.661Zfinds-105105MAS-F100105STRUCTURAL TIMBERNINETEENTH CENTURYThese two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.ARCHITECTURE39411223/173MAS2017-08-23T00:00:00ZARCHITECTURAL FRAGMENTWith finder2017-08-23T08:21:58Z2018-05-22T15:29:55Z10521428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081780.JPG251images/MASABB2024-10-09T14:16:36.428Z