2024-03-28T19:24:57+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results51120finds-1212MAS-100012LANDING CRAFT INFANTRYMODERNThis hulk is situated on the River Deben, just outside of Melton (Suffolk) and is estimated to measure 11.5 m in length and 3 m in width. The structure is rectangular in shape with squared edges and straight sides. One end suggests the presence of a bulkhead and a hatch or doorway, while the other end is missing. Parts of possible rudder components are located close to the bulkhead, suggesting that this is the stern. Internal frames can be seen throughout the remaining structure; estimated measurements reveal a spacing of approximately 0.42 m. The hull is constructed of wood in a double diagonal layout, with metal plating over the top on the exterior of the hull. The hulk shows extensive deterioration and many of its fixtures and fittings have been stripped. A large proportion of the vessel is now missing.
The shape, size and construction are all indicative of a British Landing Craft Assault (LCA) from the Second World War (WW2). The basic structure of this type of landing craft was a double diagonal wooden hull, commonly built using mahogany (Lavery 2009:20), although other timber species were used to keep up with the number of vessels required. Steel armour plating was then added as an outer skin. The overall length of an LCA was 12.7 m (41.6 ft) with a beam of 3 m (10 ft) (Royal Marines Museum). The main feature of LCA's was the bow ramp, used for amphibious landings such as on D-Day. This part of the vessel appears to be missing and may explain why the hulk has no bulkhead or bow features. The main use of the vessel was for troop transport; this featureless area took up most of the length of the hull. The internal frame spacing of LCA's was 0.45 m (Lavery 2009:21). At the after end of the troop compartment was a watertight bulkhead that separated the engine room (Lavery 2009:19). This bulkhead had a hatch for access by the stoker, which may be what is visible on the remaining hulk. After the engine room there was no further armour plating, which serves to explain the complete loss of the stern. It is difficult to positively identify this vessel as, athough the hulk displays several characteristics of an LCA, with the overall lack of structure it is possible that the remains may be of a barge or similar vessel. The British LCA was developed early in WW2 to meet the need for landing troops on invasion beaches, being built between 1939 and 1945. The LCA was developed from a prototype designed by John Thornycroft Ltd, who then took up much of the LCA construction throughout the war (Lavery 2009:18). The landing craft proved to be a vital tool in WW2, particularly in the invasion of mainland Europe. The vessel allowed troops to be ferried from the main transport to the beachhead, with a shallow draft allowing it to be driven right into the shallows. Additionally, the low silhouette and almost silent engines added to the success of the vessel.
If this vessel is an LCA, its location suggests that it was possibly used as a training vessel. The south coast of Suffolk was extensively used for all kinds of training during WW2. A large area directly to the east of Woodbridge, and across the river from the hulk, was acquisitioned by the military for training purposes (Liddiard and Sims 2014:37). The coastline also made it ideal for training in amphibious landings.
The NRHE and Suffolk HER reference numbers cited in this record refer to the 'Melton (north) hulk assemblage', an assemblage of seven hulked vessels in the intertidal zone at Melton, on the north bank of the River Deben. This site is recorded in two surveys: Rapid Field Survey of the Suffolk Coast and Intertidal Zone (Suffolk County Council Archaeological Service 2003) and Hulk Assemblages: Assessing the national context (Museum of London Archaeology 2011, 2013), however no vessel types are recorded. It has also been recorded through the Coastal and Intertidal Zone Archaeological Network (CITiZAN) No. 82023. Maritime craft41411939194513MAS2016-09-30T00:00:00ZLanding craft1526476Suffolk HER: TM 25 SE 52In situ2016-09-30T16:14:24Z2016-10-10T11:56:02Z123000115001142428235PAS57F2732E001889215934SuffolkTM285052.10131961.32763397hindering.declines.plays10MAS MASMASWood11988Steel11786IncompletePoorMODERNMODERNCoastal walkingSubmitted as wreck to the Receiver of Wreckimage1.JPG33images/MASTH2017-11-06T18:24:41.953Zfinds-77MAS-100007SPOONMODERNThis spoon is made of a metal alloy, possibly copper alloy, and was probably originally plated. Its manufacture would have been cast. The Royal Australian Air Force (RAAF) crest is stamped into the end of the spoon. The crest features the RAAF monogram with a laurel wreath surmounted by a crown. This crest is the same style as that used for cap badges and is modelled from a Royal Air Force (RAF) crest.
The more widely adopted RAAF crest was commissioned and designed in 1937 and accepted in 1939. It is composed of the imperial crown mounted on a circle featuring the words 'Royal Australian Air Force' and overlaid with a wedge-tailed eagle. Beneath this the scroll work displays the Latin motto 'Per Ardua Ad Astra' (through adversity to the stars).
This spoon may have been issued by the RAAF victualling department for squadron members to use in the mess, or to a particular individual as one item of their personal mess gear accompanied by crockery and other cutlery. It was the Australian Defence Force that adopted the cutlery moniker 'eating irons'.
The spoon was discovered on Batten Beach, Plymouth, which is in proximity to RAF Mount Batten, a RAF station and flying boat base, and indicates the likely origin and time period of its loss, although it may have been produced any time after 1921, when the RAAF was formed.The RAF Station Mount Batten was used as a base for flying boats to defend south-west England since 1 October 1928. The start of the Second World War (WW2) saw an increase in operational flying from the base and it was also targeted during German air raids. Two Australian squadrons were under RAF operation control at Mount Batten during WW2: No 461 and No 10 Squadron, both flying the Short Sunderland.
No 461 Squadron was formed at RAF Mount Batten on 25 April 1942 as an anti-submarine squadron and was stationed there until 31 August 1942. It was disbanded on 4 June 1945, having destroyed six German U-boats. Sixty-four of the 86 squadron members killed were Australian.
No 10 Squadron was formed on 1 July 1939 and was the first RAAF and British Commonwealth squadron to see active service in WW2. Running anti-submarine operations and patrols, No 10 Squadron operated mainly from bases in southern Britain. It took over the base at Mount Batten in April 1940, however moved to Pembroke in May 1941. No 10 Squadron returned to Mount Batten in January 1942 and remained stationed there until it was disbanded on 26 October 1945, and left for Australia. The squadron sank six U-boats and lost 161 personnel during WW2.
The NRHE and City of Plymouth HER reference numbers cited in this record refer to the base at Mount Batten.Food preparation and consumption414119401945382/163MAS2016-07-25T00:00:00ZCutlery1200528City of Plymouth HER Number: SX 45 SE 589With finder2016-09-08T08:56:24Z2016-12-14T10:47:45Z71728411445PAS57BC1B67001A23PAS57BC1E1600176F223147DevonSX485350.35723329-4.13817474filled.record.crash10MAS MASMASCopper alloy10627CastPlatedCompleteCorrodedMODERNMODERNCoastal walkingSubmitted as wreck to the Receiver of WreckDSC_0292.JPG15images/MASMF2017-11-06T18:25:06.061Zfinds-104104MAS-F100104SHELL CASESMODERNThe shell case measures 660 mm long and is 152 mm in diameter at the base, and 116 mm in diameter at the neck though this has been buckled and stretched. The shell case appears to have been either constructed without a base, or it has been removed at some point in the past. The diameter of the neck and its overall size point to it being a 4.5-inch or possibly a 4.7-inch shell case. Without the base with the details of type, manufacturer and date of manufacture, the history and origin of this case is not clear. It would have been part of a fixed round, i.e. the shell was attached to the shell case like a large rifle round. The maximum weight of these rounds was around 36 kg (80 lbs), which was the weight considered to be sustainable for loading manually loaded fixed ammunition. The 4.5-inch gun has been the standard medium-gun calibre of the Royal Navy for use against surface, aircraft and shore targets since 1938, and in the case of the 4.7-inch gun since 1916.
The history of this shell case is unknown, however, based on the damage it has sustained and the degree of corrosion, it appears that the shell was pried out of it and the base cut off with a lathe at some point in the past, before the remainder was lost or discarded. ARMOUR AND WEAPONS41411221/173MAS2017-08-23T00:00:00ZAMMUNITIONWith finder2017-08-23T08:19:22Z2018-05-08T08:41:12Z104152660150282114PAS57C96ECD001E82PAS59C90C510011A322625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASYellow metalIncompleteFairMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081783.JPG246images/MASABB2018-05-08T07:41:12.137Zfinds-109109MAS-F100109BOATMODERNThis find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth.
Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.TRANSPORT41411219/173MAS2017-08-23T00:00:00ZWATER CRAFTWith finder2017-08-23T08:40:58Z2018-05-08T08:40:03Z109524094012728114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081726.JPG277images/MASABB2018-05-08T07:40:03.024Zfinds-108108MAS-F100108PORTHOLEMODERNThis object is the remains of a brass porthole ring measuring 250 mm across with a brass rim 28 mm wide. It is thought that this frame would have been on the outside of the hull of the vessel while an internal frame on the inside of the vessel would have contained the glass element and a hinged deadlight (a metal plate that was both a curtain and a reinforcement against heavy seas).
Portholes have been used for centuries to allow light and ventilation to enter the lower, darker levels of vessels and in some early cases, as a means of seeing out of a submersible. Portholes are watertight and are generally crafted from glass, secured within a metal frame that is then bolted to the vessel. The popular metals that are used to create the frame of the portholes are bronze and brass because these metals corrode less in saltwater.Fixtures and Fittings41411225/173MAS2017-08-23T00:00:00ZPortholeWith finder2017-08-23T08:38:12Z2018-05-08T08:40:10Z10825032815028214PAS57C96ECD001E82PAS5A27DDB80016AC22625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASYellow metalIncompleteMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081732.JPG272images/MASABB2018-05-08T07:40:10.128Zfinds-111111MAS-F100111AIRCRAFT COMPONENTMODERNAluminium aircraft section, heavily corroded and damaged. No identifying marks or plates visible, though two cross member plate remnants present. 870 x 45mm.
The lack of identifying marks means that the type and origin of the aircraft cannot be definitively identified from this recovered section. Initially thought to be part of a piston engine support frame from something like a Spitfire fighter, a Dakota transport aircraft, or perhaps one of the multi-engined bombers,this theory was discarded as these are generally circular in section. The double row of rivet holes down one side (presumably where it attached to the skin) suggest it is more likely a stringer of some description. A stringer is a Longitudinal member (i.e. in the fuselage aligned with the longitudinal axis and in wings and tail surfaces perpendicular to this axis) which gives the airframe its shape and provides the support for the skin. In fuselages, they link frames and in aerofoils they link ribs. The consensus therefore, is that it is from the outer wing rib of a single engine aeroplane or the fin/tail plane rib of a larger multi engine aircraft from the Second World War; and has characteristics that suggest it is from a Royal Air Force or British aircraft. However, due to the corrosion and the very close variations in measurement between both metric and imperial measurements, i.e. millimetres (mm), standard wire gauge (swg) or thousands of an inch (thou), used by aircraft designers during this period, the use of the spacing and diameter of rivets, bolt holes and other spacings combined with any drilling/stamping errors means that these do not help in identifying the piece. The damage to the piece also means that the use of rivet pitch, which might identify the manufacturer, rather than the country of origin, would be open to a wide degree of error.TRANSPORT41411218/173MAS2017-08-23T00:00:00ZVehicle componentWith finder2017-08-23T08:47:41Z2018-05-23T13:59:19Z111458701272811422625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWhite metal11967FragmentMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_201708174.JPG288images/MAS2018-05-23T12:59:19.121Zfinds-103103MAS-F100103BOTTLEMODERNThis flat-based Hamilton, or 'torpedo' bottle stands 240 mm high, with a 64-mm wide base and is approximately 90 mm wide at the waist. It has a 'bottle logo' embossed on its base. There are possibly other text/numerals that have since worn away. The bottle shows moulding scars on the base and sides. It has a crown top finish.
The egg-shaped bottle was first patented by William Francis Hamilton in 1814, the idea being that the bottle had to be stored on its side to keep the cork wet and ensuring a good seal on the reusable bottle. In around 1870, the flat based egg or Hamilton bottle was introduced. Following the 'blob top' finish being replaced by the crown top and cork sometime after 1892, when this cap design was patented, the design became more popular. This was because the bottles could now be reliably stored upright without cork shrinkage and a leaky seal causing loss of the carbonated gas. This is recognisable on this bottle by the beaded rim that the metal cap fitted over. These are also generally c.25mm in diameter. The cap would have been metal with a cork lining. This, however, lead to the decline in the popularity of torpedo bottles as it made them no longer necessary (Lucas, 2010).
The mould scar travels up the neck to the lip of the bottle and this would suggest that it was manufactured around 1910 on a semi or fully automated bottle making machine, near to the end of their popularity. The 'bottle logo' on the base is probably the manufactures logo, however, several manufacturers used the same logo as their mark and therefore it has not now been possible to isolate its exact point of manufacture. The bottles were extensively exported from the U.K. and are therefore found around the world, but particularly in the former colonies and North America.BOTTLE41413MAS2017-08-23T00:00:00ZFood and liquid storage containerWith finder2017-08-23T08:15:00Z2018-05-23T14:00:10Z24010390118284911422625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASGlass10879MouldedCompleteFairMODERNMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081795.JPG241images/MAS2018-05-23T13:00:10.772Zfinds-221221MAS-D100221VALVEMODERNOne brass stopper and one brass valve. The valve has spherical central body, with three different piped connections conjoining at right angles, each indentical in style; circular and 30 mm long, with a 180 mm approximate diameter. It is wheel-operated, with the wheel shaft thinner than the piped connections at 25 mm, before expanding to a larger shaft with diameter of 65 mm. The condition of the valve is heavily corroded and encrusted with metal growths. The stopper is in a similar condition, although one nut and bolt at its centre appears to be in fair condition.This item was found with 11 hamilton bottles (MAS-D100222), four ink bottles (MAS-D100223), a copper saucepan (MAS-D100224) and two glass fruit storage bottles (MAS-D100225).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Transport4141302/183MAS2018-09-17T00:00:00ZVessel component813607Kent HER Number: TR 33 NW 23With finder2018-09-21T09:36:49Z2020-02-19T13:15:27Z2212202901745515PAS5C50379B001E6C218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCopper alloy10627FabricatedCompleteEncrustedMODERNMODERNDiving221_IMG_8756Large.JPG579images/MASRobbie Trevelyan2020-02-19T13:15:27.309Zfinds-3131MAS-O100031TIMBERMODERNPossible ships timber or part of other marine or land based structure. Truncated rounded timber with hole and evidence of mounting plate for furniture, broken or rotted off at one end exposing heart wood and a knot in the wood. Approximately 2000 mm long and 600 mm in diameter. The undamaged half of the timber appears in good condition, implying a more recent date for the timber, whereas the other part appears to have suffered extensive degradation. The arrangement of damage to the timber suggests it may have been partially submerged during its useful life, possibly as part of a shore based instalment such as a jetty or quay.Timber29413MAS2017-03-09T00:00:00ZUnclassified worked timber2017-03-09T16:32:49Z2020-02-21T11:57:28Z316002000114235PAS5C5037EF001C03217765HampshireSZ699850.77748385-1.0227273minute.catch.muddy10MAS MASMASWood11988IncompletePoorMEDIEVALx14221MODERNCoastal walkingIMG_2450.JPG92images/MASPhil Trim2020-02-21T11:57:28.321Zfinds-220220MAS-D100220VALVEMODERNTwo small brass valves and one small double valve. The first item has three conections, with two sections of thinner pipe (10 mm diameter approx) still attached perpendicular to threaded fixing, and both twisted. The thicker pipe (38 mm approx) runs parallel and opposite to threaded fixing. In all cases the rest of the pipes have sheared off. The second valve is similar in characteristics to the first, with three connections and a threaded fixing. This valve is slightly smaller and less encrusted, and only one section of thin (10 mm approx) pipe attached perpendicular to threaded fixing. Both valves have quite spherical central sections. Third valve is a double valve, with only one connection perpendicular to threaded fixing and wider second connnection (100 mm approx) opposite and parallel to threaded fixing. This item is heavily encrusted so unsure as to accuracy of interpretation. Both are heavily corroded and in poor condition.These items were recovered from the wreck SS Blanefield. Built in 1898 in Sunderland by the Short Brothers Ltd, the SS Blanefield was a screw driven steamship of 3,411 tons, a cargo carrying coaster. She sank following a collision in broad daylight with the four masted barque Kate Thomas on 1st May 1906 approximately 4 miles from Beachy Head, East Sussex. At the time the SS Blanefield was en route from Junin to Dover carrying a cargo of railway sleepers and lines. The vessel sank in under four minutes with most of the crew being rescued with 21 of the crew of 28 surviving the incident. The Kate Thomas was taken to Southampton under tow on the following day. NRHE and East Sussex HER reference numbers cited in this record refer to the wreck of SS Blanefield.Transport41411301/183MAS2018-09-02T00:00:00ZVessel component911487East Sussex HER: TV 58 NE 56With finder2018-09-21T08:53:56Z2020-03-26T11:48:55Z22037725315PAS5C50379B001E6C22625East SussexTV588850.670230920.2345585footballs.criminalist.wildflower10MAS MASMASCopper alloy10627Copper alloy10627FabricatedIncompletePoorMODERNMODERNDiving220_IMG_8682.JPG573images/MASRobbie Trevelyan2020-03-26T11:48:55.212Zfinds-219219MAS-D100219VALVEMODERNOne small brass expansion valve. It is wheel operated from two opposite ends, roughly 260 mm apart. Approximately 50 mm in from each wheel there is a piped connection with the pipes roughly 25 mm diameter and both kinking into a right angle. Between the two wheels and the pipe connection, at the centre of the expansion valve, is a large metal boss, possibly where the two ends were fixed together. Item is heavily corroded and in poor condition.This item was recovered from the wreck SS Clara (1906). Little is known or certain regarding this vessel due to confusion with another vessel of the same name that was torpedoed off the coast of Cornwall in 1917. The 1906 sinking, of a vessel known as the SS Clara, occurred following a collision near the Royal Sovereign Light Tower in June of that year. She had been en route from Brest to Dunkirk when she collided with the SS Irisbrook. Following the collision the SS Clara was taken in tow but soon abandoned as her decks became awash and she started to list, before eventually sinking. Divers have previously recovered spoons marked with the name Clara and the shipping line Burdick & Cook from the wreck confirming her identity. The remains of a vessel known as SS Irisbrook can be found to the east of the SS Clara, which itself sank following a collision in 1911, this may represent the remains of the same vessel which collided with the SS Clara in 1906.Transport414119061300/183MAS2018-08-30T00:00:00ZVessel componentWith finder2018-09-21T08:49:54Z2020-03-26T11:48:39Z2193001725315PAS5C50379B001E6C22625East SussexTV698650.649174330.38917197dalmatian.stretched.barons10MAS MASMASCopper alloy10627FabricatedIncompletePoorMODERNMODERNDiving219_IMG_8685.JPG572images/MASRobbie Trevelyan2020-03-26T11:48:39.94Zfinds-172172MAS-F100172AIRCRAFT COMPONENTMODERNRolls Royce Merlin 45 gear unit, serial number GU 69 677, with a truncated, heavily damaged and corroded, three bladed propeller. All three propeller blades have survived despite heavy corrosion, though the end of one is missing. The wiring in the propeller cam shaft is visible since the outer dome casing has partially disintegrated. The Merlin 45 engine was used in the Mk. V Supermarine Spitfire fighters, in Reconnaissance Spitfires (PR Mk. IG & P MK. IV), and early versions of the naval version the Supermarine Seafire Mk. IB and Mk. IIC). The Merlin 45 saw active service from early 1941 as squadrons were equipped with the new Mk. V Spitfires.
Consultation with Boscombe Down Aviation Collection has suggested that this aircraft likely landed on the water, rather than crashed directly, as the damage to the propellor blades is minimal. Given that the nose of an aircraft is most likely where the initial impact of a crash would occur this would appear a more than probable conclusion. Additionally, following cleaning and initial preservation steps, it was noted that there are two circular scollops in the edge of one of the propellor blades (see image 13 of 13). Boscombe Down Aviation Collection suggest that these are of a diametre closely matching that of cannon shells that may have been fired at the Spitfire from a German aircraft such as a Messerschmitt BF 109E. This evidence suggests that the aircraft, to which this Gear unit belonged, was in combat shortly before its loss. The damaged sustained likely caused the engine to fail, causing the pilot to belly land the aircraft on the sea. It is to be hoped that he successfully exited the aircraft and was rescued following these events. Efforts to identify the exact aircraft from which this gear unit originated are being contiued by Boscombe Down AC.The Mk. V Spitfires were initially developed in late 1940 as a high altitude interceptor and were essentially remodelled Mk I & Mk II spitfires with a new engine, later Mk V's were purpose built airframes.
The PR Mk. IG (Armed) & P MK. IV (Unarmed) Spitfires were variants created to fulfil the role of photo- reconnaissance of enemy held territory. On some variants the planes had all their armament removed and often replaced with additional fuel tanks to increase their operational range. Their speed, small size and high operational ceiling allowed them to either remain undetected or avoid enemy aircraft. This role had previously been performed by light bombers, such as the Bristol Blenheim, or purpose built reconnaissance aircraft, such as the Westland Lysander. They are both relatively slow aircraft and the Lysander had no armament what so ever, as a result early war losses were high and an alternative solution was sought.
The Seafire was a naval version of the Spitfire, adapted for use on aircraft carriers, the first batch of which came into service in late 1941. The earlier variants being used for training to acquaint Fleet Air Arm pilots with the Spitfire air frame and using it on aircraft carriers. vehicle41411059/183MAS2018-04-27T00:00:00Zaircraft engineWith Boscombe Down Aviation Collection2018-04-27T09:07:05Z2020-03-27T15:30:26Z172124512414PAS5C5037EF001C032MAS MASMASSteel11786OtherIncompleteCorrodedMODERNMODERNFishing172_i0000010.jpg418images/MASPhil Trim2020-03-27T15:30:26.261Zfinds-150150MAS-D100150LIDMODERNOne copper item, thought to be a lid by discoverer. It is around 180 mm in diameter with greenish brown discolouration from the oxidising of the copper. At its centre there is a raised disc that has been possibly beaten out of the original shape. This circular embossed disc is approximately 90 mm in diameter and has a small circular aperture in its centre (roughly 10 mm diameter). Other than a lid, the item could be a lamp shade of some sort or a hub of some wheeled apparatus.This items was found with two bowls (MAS-D100127), one brass hinge (MAS-D100128), one brown bottle and one clear bottle (MAS-D100129) and one ceramic mug a (MAS-D100130).UNASSIGNED3941312/173MAS2017-09-30T00:00:00ZDOMED LID2017-10-09T15:46:29Z2020-03-27T15:26:58Z1501801533415PAS5C50379B001E6C2MAS MASMASCopper10626UncertainCorrodedNINETEENTH CENTURYMODERNDiving150_copperlid.JPG759images/MASRobbie Trevelyan2020-03-27T15:26:58.894Zfinds-7676MAS-D100076ROUNDED BOWLNINETEENTH CENTURYSix small convex bowls that may have also functioned as cups or tea bowls. All the bowls are made of a refined whiteware and three of them display a hand painted decoration.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily, white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is thought that these examples may be tea wares dating to the 19th or 20th century.These items were found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZBowl813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T16:13:21Z766528415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG234images/MASLR2017-11-06T18:17:23.969Zfinds-6868MAS-D100068WINE BOTTLENINETEENTH CENTURYTwo green glass wine bottles that appear to have the flat band-like collar around the rim which is typical of Continental (particularly French) wine bottles; the type appeared around the middle of the 19th century. This particular shape was - and still is - referred to as a 'hock' or Rhine wine and was one of the three dominant styles of wine bottles that bridge the time from at least the mid-19th century to the present day.
Hock wine bottles are of German or French origin and during the 19th century, typically contained both red and white Rhine and Mosel wines. The distinctive shape of these bottles is typified by being tall and slender with no sharp break where the body merges into the shoulder and the shoulder becomes the neck. They were typically free-blown or dip moulded, often exhibiting pontil scars where the glass was broken away from the rod. Hock wine bottles from the 19th and early 20th centuries are most often seen in shades of olive green or amber, but were produced commonly in a wide array of other colours (Society for Historical Archaeology webpage, accessed Sept 2017).These items were found with six stoneware seltzer bottles (MAS-D100065), four stoneware beverage bottles (MAS-D100066),three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and an egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZBottle813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:47:13Z682182841415PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASGlass10879BlownCompleteNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG1images/MASLR2017-11-06T18:18:14.453Zfinds-6565MAS-D100065BOTTLENINETEENTH CENTURYSix stoneware seltzer bottles, of a type used to carry mineral water from various Continental (mainly German) spas. The term 'seltzer' takes its name from the town of Selters in the lower Rhineland, one of the original producers of effervescent mineral waters. This cylindrical bottle type was used from the early 19th century through to the First World War. These types of bottles were produced by the specialist potters known as Krugbacker, or pot bakers, in the Westerwald region of Germany. These bottles, which changed little throughout the 19th century, were slender and cylindrical and colored reddish brown with straight, vertical sides. Bottles were stamped with marks indicating the bottling company, the jug baker's mark, the well number from which they were filled, and the town from which they were shipped (NMSC Archaeology & Museum Blog webpage, accessed September 2017).These items were found with four stoneware beverage bottles (MAS-D100066), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and one egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:46:02Z6565284115PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG181images/MASLR2017-11-06T18:18:24.986Zfinds-6666MAS-D100066BOTTLENINETEENTH CENTURYFour stoneware bottles (three large and one smaller) that were probably used for beer, ale, stout or porter.
Stoneware bottles provided the ultimate in protection from the detrimental effects of light but were very heavy. They were produced in Britain in the 1800s and many bottles found in the United States were even imported from here.
All of these bottles have a feldspathic glaze over an ochre dip on the upper parts of the bottle giving them a darker colour on top. Feldspars (natural rocks of aluminosilicates) are used in stoneware and porcelain glazes because they fuse only at high temperatures. The feldspathic glaze dates the bottles to the 1830s or later while stoneware bottles were more or less superseded by glass by the first decade of the 20th century. These items were found with six stoneware seltzer bottles (MAS-D100065), two green glass wine bottles (MAS-D100068), three aqua glass bottles (MAS-D100071), one Hamilton bottle (MAS-D100072), four small stoneware ink bottles (MAS-D100074), six small bowls (MAS-D100076) and an egg cup (MAS-D100078).
All of these items were recovered from the wreck of SS Strathclyde, a British trading steamship built in 1871 in Blackwood, Port Glasgow. The ship sank in 1876 off Dover whilst carrying 23 passengers and 47 crew for Bombay, following a collision with Franconia and resulting in the loss of 38 lives.
NRHE and Kent HER reference numbers cited in this record refer to the wreck of SS Strathclyde.
The location of SS Strathclyde was taken from the British National Grid co-ordinate from the National Record of the Historic Environment.Container39411173/173MAS2017-07-24T00:00:00ZFood and liquid storage container813607Kent HER Number: TR 33 NW 23With finder2017-07-24T21:26:17Z2017-10-05T11:46:18Z6645284215PAS5989C577001EA7PAS57BC21F300115B218210KentTR343851.093539951.34042371fatigue.paddles.woodland10MAS MASMASCeramic10539CompleteGoodNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckIMG_1938.JPG182images/MASLR2017-11-06T18:18:21.703Zfinds-4242MAS-D100042BOWLNINETEENTH CENTURYFragment of white ceramic bowl or lid marked with black and white geometric design and number '23'. Number appears to be hand-painted or stamped. Found loose on the seabed with a little marine growth present. This is a naval issue bowl probably used for drinking rather than smaller, handled cups, as they were more practical on board a ship. The number refers to the mess number, and the bowls were designed to be stored upside-down. The find dates to the late 19th or 20th century.CONTAINER39411119/173MAS2017-05-03T00:00:00ZFOOD SERVING CONTAINERWith finder2017-05-29T15:59:39Z2017-09-26T13:19:10Z425110160152811315PAS5989C577001EA7PAS57BC21F300115B214362DorsetSZ057950.6106936-1.93069645excuse.snore.bookings10MAS MASMASCeramic10539GeometricFragmentPoorNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckLid3.jpg147images/MASLR2017-11-06T18:19:59.264Zfinds-1111MAS-100011CLAY PIPE (SMOKING)NINETEENTH CENTURYThis is a very worn example of a 'cutty' (short) pipe (total length 115 mm) with a round-based spurless bowl imitating a briar pipe, and decorated with multiple 'thorns' - small pointed protrusions around the stem and bowl. This type of bowl was in use between c. 1850 and 1910 (Atkinson and Oswald 1969: type 30), and the thorn design was one of the many decorative types popular during this period (e.g. Ayto 1994:11; Hammond 2009: figure 7).
Clay tobacco pipes were manufactured (using two-piece moulds) in huge quantities in many towns and cities around the UK and were also imported from the Continent. They were cheap, highly disposable items, often given away with a pint of beer by the local publican. The short 'cutty' pipes were popular with working men as they could be smoked while working, whereas the longer pipes were more for smoking at leisure.
This clay pipe was found approximately 250 m outside the offshore designated area for the HMS Coronation wreck site. The period of the pipe's manufacture confirms that it is not associated with this vessel, which was wrecked in 1691. The pipe's location is thought to be within an extensive dumping site featuring artefacts dating from the 19th century through to the modern period.Although the clay pipe is not associated with HMS Coronation, there is still the potential for small and delicate items to be discovered beyond the extent of the protected areas that may be associated with the wreck.
HMS Coronation was an English Royal Navy Second Rate ship of the line, armed with 90 guns. Built at Portsmouth Dockyard and launched in 1685, it was wrecked in a storm in 1691 off Rame Head, Cornwall, with the loss of approximately 600 lives (Lavery 1983: 162).
After the discovery of the site in 1967, it was protected in 1978 under the Protection of Wrecks Act 1973 (1978 - Coronation offshore Site 17; 1989 - Coronation inshore Site 33). The offshore site has an exclusion zone radius of 150 m, while the inshore site has an exclusion zone radius of 250 m. Divers may apply for a licence to visit these sites.
The NRHE and Cornwall & Scilly HER reference numbers cited in this record refer to the wreck of HMS Coronation.Dress and personal accessories3941185019101298/163MAS2016-09-23T00:00:00ZPersonal accessory1082129; 1082130Cornwall & Scilly HER Number: SX 44 NW 53; SX 44 NW 54With finder2016-09-28T13:16:16Z2016-10-12T14:23:58Z111151528439115PAS57BC1B67001A23PAS57BC1E1600176F243750CornwallSX434850.31098713-4.20632722strict.crackles.falters10MAS MASMASCeramic10539OtherMouldedCompleteFairNINETEENTH CENTURYMODERNDivingSubmitted as wreck to the Receiver of WreckWP_20160926_16_45_23_Pro.jpg29images/MASMF2017-11-06T18:24:46.443Zfinds-11MAS-6105BAFIREARMNINETEENTH CENTURYThis gun is a QF (quick firing) 6-pounder Hotchkiss, a light 2.25 inch (57 mm) naval and coastal defence gun from the late 19th century. The design appears to be pre-1890 as it does not have the recoil system that was introduced at that time. The original 1885 Mk I was a built-up gun with a vertical sliding-block breech. The name comes from the French manufacturing company, Hotchkiss, who were the major supplier of light QF guns in the world. This type of gun became a standard torpedo defence weapon; many navies bought this same type of gun (Friedman 2011).This gun was ship mounted and from the location given may have come from the French merchant vessel, SS Saint Andre, a 2457 tons French, screw-driven cargo steamer. In France in 1915, it was decided to arm merchant ships with guns against U-boats. Initially, small naval guns were used, with French steamers of more than 500 tons being issued with two guns with a calibre of 90 mm or more in three stages. First, all ships were armed with at least one gun. These small-calibre guns (47 mm, 57 mm, 65 mm) were then replaced with one more powerful gun. Finally, all steamers were armed with a gun more powerful than 90 mm. In a two-year period between 1916 and 1918, over 1600 merchant ships received one gun and another 400 received a second (Friedman 2011).
SS Saint Andre was built by Ateliers & Chantiers de France, a company founded in 1880, in Dunkerque in 1907 as Yard No. 46. On 19 December 1917, SS Saint Andre was on a voyage from Rouen, France, to Algiers, Algeria, with a cargo of empty casks and barrels, when it was torpedoed and sunk by the German submarine UB-58, commanded by Kapitänleutnant Werner Fürbringer, nine miles southwest of the Eddystone Lighthouse, Devon. At the time of sinking the vessel was owned by Société Navale de l'Ouest, Le Havre. Saint Andre now lies in approximately 70 m of water. NRHE and Cornwall HER reference numbers cited within this record refer to the wreck of SS Saint Andre. Due to the ambiguity of the gun having come from the wreck of SS Saint Andre, the chronology of the find is broader.Armour and weapons3941188519501150/163MAS2016-07-01T00:00:00ZProjectile weapon1257850Cornwall HER Number: SX 33 SE 77With finder2016-07-25T14:12:59Z2016-08-26T12:44:03ZPAS5796105B001ACC12482841414PAS57BC1B67001A23PAS57BC1E1600176F243750CornwallSX170749.93511828-4.55145117contemporary.rickety.muesli10MAS MASMASSteel11786Iron11019CastCompleteCorrodedNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckMAS6105BA_Image1.jpg7images/MASMF2017-11-06T18:25:32.61Z