2024-03-28T23:48:32+00:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results4120finds-107107MAS-F100107TRANSPORTPOST MEDIEVALThis ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor.
The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee.
The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.SHIP36411224/173MAS2017-08-23T00:00:00ZTimberWith finder2017-08-23T08:34:54Z2018-05-23T13:57:54Z10711012083011428114PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081739.JPG262images/MASABB2018-05-23T12:57:54.253Zfinds-105105MAS-F100105STRUCTURAL TIMBERNINETEENTH CENTURYThese two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.ARCHITECTURE39411223/173MAS2017-08-23T00:00:00ZARCHITECTURAL FRAGMENTWith finder2017-08-23T08:21:58Z2018-05-22T15:29:55Z10521428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081780.JPG251images/MASABB2018-05-22T14:29:55.334Zfinds-110110MAS-F100110POSTPOST MEDIEVALHeavily eroded and abraded timber fragment with marine borer and growth present. As it is so worn, it is difficult to tell what type of wood it is and whether this fragment was originally completely shaped and worked, or just partially worked to achieve its function. The timber does not exhibit any evidence or staining from fastenings, however, there is one hole that could have been a fastening point at some stage.
It is thought that this fragment may be a broken post or groyne timber that has come from a beach rather than material relating to a wreck. Groynes are wooden barriers built at right angles to a beach to prevent the movement of material along the coast caused by longshore drift. They can be subjected to storm damage which results in them being broken and drifting out to sea. The possibility that this piece of wood derives from a vessel should not be ruled out, however. Shipwrecks represent an important part of our marine historic landscape and are important in understanding some of the most fundamental aspects relating to human past and experience.ARCHITECTURE36411220/173MAS2017-08-23T00:00:00ZARCHITECTURAL ELEMENTWith finder2017-08-23T08:45:04Z2018-05-08T08:39:55Z110180720114281314PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentPoorPOST MEDIEVALx41047MODERNx41047FishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081719.JPG284images/MASABB2018-05-08T07:39:55.115Zfinds-106106MAS-F100106LADDERNINETEENTH CENTURYThese two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut.
Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.Tools and equipment39411222/173MAS2017-08-23T00:00:00ZCompanion ladderWith finder2017-08-23T08:31:10Z2018-05-08T08:40:53Z10621428114PAS57C96ECD001E82PAS57C96ECD001E8222625East SussexTQ440050.781702980.04126088pastels.dash.stockpile10MAS MASMASWood11988FragmentNINETEENTH CENTURYMODERNFishingSubmitted as wreck to the Receiver of WreckFIPAD_2017081767.JPG254images/MASABB2018-05-08T07:40:53.678Z