Record ID: MAS-D100221
Object type: VALVE
Broad period: MODERN
County: Kent
Workflow stage: Published
One brass stopper and one brass valve. The valve has spherical central body, with three different piped connections conjoining at right angles, each indentical in style; circular and 30 mm long, with a 180 mm approximate diameter. It is wheel-operated, with the wheel shaft thinner than the piped connections at 25 mm, before expanding to a larger shaft with diameter of 65 mm. The condition of the valve is heavily corroded and encrusted with metal growths. The stopper is in a similar condition, although one nut and bolt at its centre appears to be in fair condition.
Created on: Friday 21st September 2018
Last updated: Wednesday 19th February 2020
Spatial data recorded.

Record ID: MAS-D100220
Object type: VALVE
Broad period: MODERN
County: East Sussex
Workflow stage: Published
Two small brass valves and one small double valve. The first item has three conections, with two sections of thinner pipe (10 mm diameter approx) still attached perpendicular to threaded fixing, and both twisted. The thicker pipe (38 mm approx) runs parallel and opposite to threaded fixing. In all cases the rest of the pipes have sheared off. The second valve is similar in characteristics to the first, with three connections and a threaded fixing. This valve is slightly smaller and less encrusted, and only one section of thin (10 mm approx) pipe attached perpendicular to threaded fixin…
Created on: Friday 21st September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100219
Object type: VALVE
Broad period: MODERN
County: East Sussex
Workflow stage: Published
One small brass expansion valve. It is wheel operated from two opposite ends, roughly 260 mm apart. Approximately 50 mm in from each wheel there is a piped connection with the pipes roughly 25 mm diameter and both kinking into a right angle. Between the two wheels and the pipe connection, at the centre of the expansion valve, is a large metal boss, possibly where the two ends were fixed together. Item is heavily corroded and in poor condition.
Created on: Friday 21st September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100193
Object type: ENGINE
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100128
Object type: HINGE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This record refers to the metal hinge and attached timber shown in the top left corner of image one, the other finds are dealt with under separate records. The object is approximately 305 mm in overall length and 204 mm in overall width. For the hinge element of the object only one leaf can be observed from the photo, which measures approximately 64 mm by 127 mm. Given the leaves are likely to be identical in size, this would suggest the overall width is approximately 127 mm making a regular square when fully opened. The metal of the hinge is in generally good condition, with some blu…
Created on: Monday 9th October 2017
Last updated: Wednesday 22nd April 2020
No spatial data available.

Record ID: MAS-O100124
Object type: BRASS
Broad period: POST MEDIEVAL
Workflow stage: Published
One ornate brass piece. The piece has an aperture in the middle, in the centre of a circular disc which is itself recessed slightly into the surface. The disc extends laterally into two leaf-shaped limbs, which are decoratively styled and form curved arrows at their tips. At the end of each limb there is a circular hole, which was likely used to fasten the brass piece to its host object. These holes are countersunk, presumably to accommodate the heads of screws. The piece is approximately 90 mm in length, with a width of 40 mm and thickness of 2 mm. The diameter of the two larger holes…
Created on: Monday 11th September 2017
Last updated: Friday 27th March 2020
Spatial data recorded.

Record ID: MAS-D100115
Object type: CARTRIDGE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Images of this find were sent to Trevor Parker of the Ordnance Society. He confirmed that these three shell cases belong to a six-pounder Hotchkiss gun. This particular type of gun was introduced in 1884 for use against torpedo boats. They were used during First World War on the Arethusa and early 'C' class cruisers and a few submarines as well as on Monitors M.15 through M.33. Originally French in origin, they were introduced to Britain in 1886 (Tucker 2013). Many were subsequently used as sub-calibre and saluting guns which meant that they were still available in 1939 (Naval Weapons,…
Created on: Friday 8th September 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-100007
Object type: SPOON
Broad period: MODERN
County: Devon
Workflow stage: Published
This spoon is made of a metal alloy, possibly copper alloy, and was probably originally plated. Its manufacture would have been cast. The Royal Australian Air Force (RAAF) crest is stamped into the end of the spoon. The crest features the RAAF monogram with a laurel wreath surmounted by a crown. This crest is the same style as that used for cap badges and is modelled from a Royal Air Force (RAF) crest. The more widely adopted RAAF crest was commissioned and designed in 1937 and accepted in 1939. It is composed of the imperial crown mounted on a circle featuring the words 'Royal Austra…
Created on: Thursday 8th September 2016
Last updated: Wednesday 14th December 2016
Spatial data recorded.