MAS-O100234: BARREL
This find comprises of the remains of three to four wooden barrels, which were buried in the intertidal sandy substrate of a pleasure beach. The action of the tide revealed the barrels and it is unclear how much of the barrels remain. End of the staves, lengths of timber making the sides of the barrel, are visible and clearly degraded. In some cases these give the appearance of flaring outwards, implying that only the lower portion of the barrel remains. At least one barrel exhibits inwardly projecting staves, suggesting more than half of the barrel remains. There is some evidence for the remains of posts protruding from the barrels which otherwise give the appearance of having been filled with sand and stone. The term cask is also used to describe barrels specifically intended for the storage of liquid, most commonly alcohol such as wine and beer. It has not been possible at this stage to ascertain the exact size and type of the barrels comprising this find, though it is estimated that they are of a small to medium size such as a Rundlet or Tierce. What the barrels were originally used for is not readily discernible, though it does appear that they have been repurposed for another function. The presence of posts within the barrels and their relative positions, laid out in a rough rectangle, suggests they used to accommodate foundation posts of a possible structure. This may have been a simple platform for bathers or anglers or something more complex such as a temporary jetty or pontoon. An image, submitted by the finder, dating to the 1850s shows structures in approximately the same position as the barrels, which may indicate the structure previously supported by the barrels. Alternatively they may relate someway to the practicing for the D-Day Landings in Normandy, which incorporated the beach and construction of landing pontoons. It has not been possible to firmly date this find from the available data, but given their condition and the preservation of the timber elements a more recent, post-medieval, date is tentatively suggested.
Stable URI: https://marinefinds.org.uk/database/artefacts/record/id/234

MAS-D100221: VALVE
One brass stopper and one brass valve. The valve has spherical central body, with three different piped connections conjoining at right angles, each indentical in style; circular and 30 mm long, with a 180 mm approximate diameter. It is wheel-operated, with the wheel shaft thinner than the piped connections at 25 mm, before expanding to a larger shaft with diameter of 65 mm. The condition of the valve is heavily corroded and encrusted with metal growths. The stopper is in a similar condition, although one nut and bolt at its centre appears to be in fair condition.
Stable URI: https://marinefinds.org.uk/database/artefacts/record/id/221

MAS-D100220: VALVE
Two small brass valves and one small double valve. The first item has three conections, with two sections of thinner pipe (10 mm diameter approx) still attached perpendicular to threaded fixing, and both twisted. The thicker pipe (38 mm approx) runs parallel and opposite to threaded fixing. In all cases the rest of the pipes have sheared off. The second valve is similar in characteristics to the first, with three connections and a threaded fixing. This valve is slightly smaller and less encrusted, and only one section of thin (10 mm approx) pipe attached perpendicular to threaded fixing. Both valves have quite spherical central sections. Third valve is a double valve, with only one connection perpendicular to threaded fixing and wider second connnection (100 mm approx) opposite and parallel to threaded fixing. This item is heavily encrusted so unsure as to accuracy of interpretation. Both are heavily corroded and in poor condition.
Stable URI: https://marinefinds.org.uk/database/artefacts/record/id/220

MAS-D100219: VALVE
One small brass expansion valve. It is wheel operated from two opposite ends, roughly 260 mm apart. Approximately 50 mm in from each wheel there is a piped connection with the pipes roughly 25 mm diameter and both kinking into a right angle. Between the two wheels and the pipe connection, at the centre of the expansion valve, is a large metal boss, possibly where the two ends were fixed together. Item is heavily corroded and in poor condition.

MAS-D100207: BOTTLE
Long necked glass bottle in clear or aqua marine glass. Overall height of 210 mm from base to finish, the height of body from base to shoulder being 120 mm. The finish being of the applied style, bearing a ring of glass approximately 15 mm wide over a further ring extending a further 5-10 mm down the neck. The base of the vessels exhibits a slightly concave punt <10 mm deep. In profile the body appears to be of a flattened hexagon shape, approximately 70 mm wide. the largest pane of the hexagonal shape being 45 mm across. The contraction from body to neck is severe, narrowing to 30 mm in only 10 mm of height, the contraction being convex in shape. The exterior of the neck is 30 mm wide at its base, tapering to 20 mm where it meets the finish. the finish being approximately 25 - 30 mm across. The body bears the inscription of C & B embosed near the base of the largest pane of the hexagon. The intended use of the vessel is unclear, being of a fairly unique design, and may relate to medicinal products or possibly the bottling of gin. No exact details of the company or product to which the logo C & B relates can be ascertained at this time. As it was found with mid to late 19th century finds, it implies a probable date of this period. The verall condition is good as the vessel is complete, though there is soe evidence of encrustation along one side of the body.

MAS-D100205: TOBACCO PIPE
Complete example of a clay tobacco pipe of the bent billiard style, probably dating to the 19th century. Overall length of 80 mm, with the stem being 50 mm in length. The "short stem" is circular in profile at the heel, changing to a hexaganol profile 20 mm from the mouth piece, which bears beading around the aperture. The left hand side of the stem, from the users perspective, bears a cartouche comprising an embossed diamond lozenge in turn enclosing an incised inscription of SQUATTERS OWN. The opposite side of the stem bears an identical lozenge enclosing the incised word SYDNEY. The bowl is approximately 35 mm in height, from base to mouth, with the mouth having an exterior width of 25 mm on the long axis. the shape of the bowl is slightly rounded on the outside, with no evidence of flatenning of the heel. The clay fabric is of an off white or ivory colour with a smooth satin like finish. The inscription "Squatters Own" refers to a series of pipes manufactured solely for the Australian market in England, sometimes also referred to as "Squatters Own Budgaree" or "Squatters Bungaree" (Budgaree/Bungaree is derived from Aboriginal languages, meaning good). Though uncertain, these pipes were probably manufactured in Rainford at the Hill Top Pipe Works, run by David Swallow, though other manufacturers in Scotland and elsewhere in England may have subsequently copied this style (Gojack and Stuart 1999). Examples of these pipes have not been found outside Australia and New Zealand other than at the Rainford works and one unusual example of two fragments recovered in New Jersey (Springate 2010). Examples of these pipes often exhibit narrow bowls with intricate designs, known as effigy pipes, this example has a fuller and larger bowl without an effigy however.

Find consists of a fragment of a porcelain cup, representing about 1/4 - 1/3 of the total vessel including a complete base bearing a backstamp of BRYONIA U & C. Though only partially surviving, what remains is in fair condition with evidence of slight encrustation around the base. No scale was provided, however, other examples of this pattern and manufacturer have a diameter of c. 75 mm. The U & C inscription refers to Utzschneider & Co, a company based originally in Sarreguemines, North East France. This region was previously part of Alsace-Lorraine and therefore the manufacture of this vessel would have likely have been in Germany. The company name existed between 1800 and 1919 and therefore this vessel likely dates to the later part of this period due to the date the ship from which it was recovered sank. The pattern on the cup is known as Black Mulberry Bryonia Pattern, to which the BRYONIA inscription refers.

MAS-D100193: ENGINE
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side approximately 25 mm from the upper edge. This circular aperture, with the lug at its centre, has a diameter of c. 95 mm. The interior of the object is not recessed beneath the edges of the aperture and therefore forms a a solid shape between the solid and open faces, conforming to the circumference of the aperture. The solid face, presumably forming the rear of the object, is approximately 6 mm thick. The outline of what may be a screw hole for affixing is visible 3 - 4 mm from the top edge just to right of centre on the solid face. The object has 3 closed and one open side, where the circular aperture flairs outwards. Of the closed sides two are straight, running at right angles to the opens side, with the remaining closed side opposite the open side being slightly curved. This slightly more aesthetically pleasing element may indicate that this is in fact the top edge of the object. The intended function of the item is not immediately apparent, though clearly something is intended to either run through the object or pivot around the central lug. Though no firm identification has been established the suggested functions include a bearing case, a rail mount, a hinge pivot or a cable relay.

MAS-D100138: CONTAINERS
Two shards of crockery with makers mark present. The stamp is made up of letters "H A P A G" and a stylised admiralty anchor which has a wooden stock behind a shield. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. The stamps would have been on the base of the corckery therefore it is not clear whether these pieces would have belonged to bowls or plates when they were in use. The shards are white, with dark flecked inclusions and yellowish patches. It is more than likely that these pieces were part of the vessel's everyday tableware.

MAS-O100169: KNIFE
Double edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long. Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and only appears to be blade like.

MAS-O100124: BRASS
One ornate brass piece. The piece has an aperture in the middle, in the centre of a circular disc which is itself recessed slightly into the surface. The disc extends laterally into two leaf-shaped limbs, which are decoratively styled and form curved arrows at their tips. At the end of each limb there is a circular hole, which was likely used to fasten the brass piece to its host object. These holes are countersunk, presumably to accommodate the heads of screws. The piece is approximately 90 mm in length, with a width of 40 mm and thickness of 2 mm. The diameter of the two larger holes on the limbs is 5mm approximately, and the diameter of the central hole is around 2-3 mm, with the central disc of the piece having a diameter of 4 mm. Whilst by no means certain, this object appears to be a fitting for an item of furniture. The recess around the central hole appears to be designed to accommodate the base of a circular or spherical/hemispherical object, suggestive of a handle or knob, while the two other holes are for securing the brass plate to the item of furniture. This, therefore, may be a bracket for a drawer or door handle on an item of furniture.

MAS-D100115: CARTRIDGE
Images of this find were sent to Trevor Parker of the Ordnance Society. He confirmed that these three shell cases belong to a six-pounder Hotchkiss gun. This particular type of gun was introduced in 1884 for use against torpedo boats. They were used during First World War on the Arethusa and early 'C' class cruisers and a few submarines as well as on Monitors M.15 through M.33. Originally French in origin, they were introduced to Britain in 1886 (Tucker 2013). Many were subsequently used as sub-calibre and saluting guns which meant that they were still available in 1939 (Naval Weapons, Naval Technology and Naval reunions webpage, accessed September 2017). Although these cartridges are empty, there is a good chance that their primers are live.The evidence for this is that they all have their primer protectors in place.These are three-legged covers that clip over the base and have a domed area in the middle that sits over the primer in the middle of the case bottom, to prevent accidental striking of the primer before it's loaded (War Office 2003). The edges of these clips are visible on all three cases and would have been removed before firing. This raises the question of where the shells have gone if they were not fired. The shells would have been held firmly in place therefore it has been suggested that these shell cases are of some age, dating back to the early 1900s, shortly after this type of gun appeared and that the actual shells have rusted away completely.

MAS-F100111: AIRCRAFT COMPONENT
Aluminium aircraft section, heavily corroded and damaged. No identifying marks or plates visible, though two cross member plate remnants present. 870 x 45mm. The lack of identifying marks means that the type and origin of the aircraft cannot be definitively identified from this recovered section. Initially thought to be part of a piston engine support frame from something like a Spitfire fighter, a Dakota transport aircraft, or perhaps one of the multi-engined bombers,this theory was discarded as these are generally circular in section. The double row of rivet holes down one side (presumably where it attached to the skin) suggest it is more likely a stringer of some description. A stringer is a Longitudinal member (i.e. in the fuselage aligned with the longitudinal axis and in wings and tail surfaces perpendicular to this axis) which gives the airframe its shape and provides the support for the skin. In fuselages, they link frames and in aerofoils they link ribs. The consensus therefore, is that it is from the outer wing rib of a single engine aeroplane or the fin/tail plane rib of a larger multi engine aircraft from the Second World War; and has characteristics that suggest it is from a Royal Air Force or British aircraft. However, due to the corrosion and the very close variations in measurement between both metric and imperial measurements, i.e. millimetres (mm), standard wire gauge (swg) or thousands of an inch (thou), used by aircraft designers during this period, the use of the spacing and diameter of rivets, bolt holes and other spacings combined with any drilling/stamping errors means that these do not help in identifying the piece. The damage to the piece also means that the use of rivet pitch, which might identify the manufacturer, rather than the country of origin, would be open to a wide degree of error.

MAS-F100110: POST
Heavily eroded and abraded timber fragment with marine borer and growth present. As it is so worn, it is difficult to tell what type of wood it is and whether this fragment was originally completely shaped and worked, or just partially worked to achieve its function. The timber does not exhibit any evidence or staining from fastenings, however, there is one hole that could have been a fastening point at some stage. It is thought that this fragment may be a broken post or groyne timber that has come from a beach rather than material relating to a wreck. Groynes are wooden barriers built at right angles to a beach to prevent the movement of material along the coast caused by longshore drift. They can be subjected to storm damage which results in them being broken and drifting out to sea. The possibility that this piece of wood derives from a vessel should not be ruled out, however. Shipwrecks represent an important part of our marine historic landscape and are important in understanding some of the most fundamental aspects relating to human past and experience.

MAS-F100109: BOAT
This find is an unidentified curved aluminium sheet that measures approximately 0.94 m by 0.24 m and has a thickness of 5 mm. The sheet displays one riveted hole and one area still exhibits faint traces of red paint. The sheet is covered in a layer of marine growth. Initially it was believed that this object could be associated with aviation remains, however, after consulting our historic aircraft specialist, it was confirmed that the material is too thick to belong to an aircraft. The colour red does not often appear, other than on external markings or Luftwaffe radio equipment, both of which would have been made of a lighter gauge material. Although the origin of this aluminium sheet is unknown, it is possible that it is of industrial origin; or it may be related to vessel superstructure plating or in the internal construction for retaining insulating material.

MAS-F100108: PORTHOLE
This object is the remains of a brass porthole ring measuring 250 mm across with a brass rim 28 mm wide. It is thought that this frame would have been on the outside of the hull of the vessel while an internal frame on the inside of the vessel would have contained the glass element and a hinged deadlight (a metal plate that was both a curtain and a reinforcement against heavy seas). Portholes have been used for centuries to allow light and ventilation to enter the lower, darker levels of vessels and in some early cases, as a means of seeing out of a submersible. Portholes are watertight and are generally crafted from glass, secured within a metal frame that is then bolted to the vessel. The popular metals that are used to create the frame of the portholes are bronze and brass because these metals corrode less in saltwater.

MAS-F100107: TRANSPORT
This ship's timber is 830 mm long, 110 x 120 mm in profile, with truncated 25 mm diameter treenails; and a 385 x 65 mm slot for the supporting metal work from which the visible corrosion products suggest that they were of iron construction. The images were forwarded to ship expert and author Richard Endsor. The timber appears to be the beam end from a small ship, with evidence of knees on both sides. The small piece of plank let into it crossways may be the remains of a waterway at the side making this face the upper side of the beam. The treenails probably secured the plank. The notch at the beam end may have fitted between the frame timbers of the ship's hull. The recessed slot may be to take a lodging fore and aft knee, and the flat section on the opposite side would be for a hanging knee. The evidence of corrosion products on the beam suggest that it is from a modern ship, as although iron support structures in the construction of ships appeared during the latter part of the18th century, they were only initially used in warships and large merchantmen, and not until later in smaller vessels such as fishing boats and sailing barges. The retrofitting of them in warships was common during the Napoleonic wars. The uptake of iron fitting was very much linked to the availability of wood, and therefore most ships were built of wood with wooden framing components and some iron strengthening, the Cutty Sark, built in 1869, is one example of this approach. The different designs of iron knee, where they survive, also act as a useful guide to dating wreck sites, particularly in the case of British wrecks. European and American built wrecks, where good quality timber was readily available or cheaper means these are less easily dated by their metal components.

MAS-F100106: LADDER
These two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut. Companion ladders or a companion way is usually steep but has treads or stairs rather than rungs typically seen on a ladder. Weight can be spread over a much larger area than concentrated on the surface of the small rungs of a ladder therefore it is possible to carry much heavier loads up and down these ladders. Companionways on modern vessels now tend to be made of aluminium, however on wooden sailing vessels and fishing vessels, wooden ladders may still be used, therefore it is difficult to date these pieces.

MAS-F100105: STRUCTURAL TIMBER
These two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather than a ship's board or rail. The smaller piece appears to be a fragment of an offcut or discarded section of a larger timber piece.

MAS-F100104: SHELL CASES
The shell case measures 660 mm long and is 152 mm in diameter at the base, and 116 mm in diameter at the neck though this has been buckled and stretched. The shell case appears to have been either constructed without a base, or it has been removed at some point in the past. The diameter of the neck and its overall size point to it being a 4.5-inch or possibly a 4.7-inch shell case. Without the base with the details of type, manufacturer and date of manufacture, the history and origin of this case is not clear. It would have been part of a fixed round, i.e. the shell was attached to the shell case like a large rifle round. The maximum weight of these rounds was around 36 kg (80 lbs), which was the weight considered to be sustainable for loading manually loaded fixed ammunition. The 4.5-inch gun has been the standard medium-gun calibre of the Royal Navy for use against surface, aircraft and shore targets since 1938, and in the case of the 4.7-inch gun since 1916. The history of this shell case is unknown, however, based on the damage it has sustained and the degree of corrosion, it appears that the shell was pried out of it and the base cut off with a lathe at some point in the past, before the remainder was lost or discarded.

MAS-F100103: BOTTLE
This flat-based Hamilton, or 'torpedo' bottle stands 240 mm high, with a 64-mm wide base and is approximately 90 mm wide at the waist. It has a 'bottle logo' embossed on its base. There are possibly other text/numerals that have since worn away. The bottle shows moulding scars on the base and sides. It has a crown top finish. The egg-shaped bottle was first patented by William Francis Hamilton in 1814, the idea being that the bottle had to be stored on its side to keep the cork wet and ensuring a good seal on the reusable bottle. In around 1870, the flat based egg or Hamilton bottle was introduced. Following the 'blob top' finish being replaced by the crown top and cork sometime after 1892, when this cap design was patented, the design became more popular. This was because the bottles could now be reliably stored upright without cork shrinkage and a leaky seal causing loss of the carbonated gas. This is recognisable on this bottle by the beaded rim that the metal cap fitted over. These are also generally c.25mm in diameter. The cap would have been metal with a cork lining. This, however, lead to the decline in the popularity of torpedo bottles as it made them no longer necessary (Lucas, 2010). The mould scar travels up the neck to the lip of the bottle and this would suggest that it was manufactured around 1910 on a semi or fully automated bottle making machine, near to the end of their popularity. The 'bottle logo' on the base is probably the manufactures logo, however, several manufacturers used the same logo as their mark and therefore it has not now been possible to isolate its exact point of manufacture. The bottles were extensively exported from the U.K. and are therefore found around the world, but particularly in the former colonies and North America.

MAS-D100085: CLAY PIPE (SMOKING)
A selection of seven clay pipes. Two of the pipes are of 'Irish' type (Atkinson and Oswald 1969, type 31, dated post-1840), with spurs and milled bowl rims, and the remaining five are of a spur-less form copying the briar pipe (ibid., type 30, dated c. 1850-1910). All of the clay pipes are 'cutty' (short) pipes. The spur-less examples are all stamped with the mark 'H B W Russell Co.'. This appears to be the mark of an agent or retailer rather than the pipe manufacturer (as is more usual). H. B. W. Russell may have a connection with Liverpool - pipes stamped 'HBW Russell of Liverpool' have been found in Ghana (Basford 2012), but the company also had a base in Cape Town (Micots 2010).

MAS-D100087: DOMED LID
One ceramic serving dish lid made of a refined whiteware with transfer-printed design in red.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c. 1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate).

MAS-D100084: BOTTLE
Three cylindrical glass bottles. The two larger bottles are full size wine bottles. One is of the 'Burgundy' type and is most likely Continental. The half-size wine bottle, originally thought to be a champagne bottle, also has a Continental style neck. The Continental style neck appears around the middle of the 19th century (Dumbrell 1983). All are of nineteenth or twentieth century type.

MAS-D100100: BOTTLE
A collection of five bottles comprising two full-size glass bottles, one squat cylindrical glass bottle, one small clear bottle, and one stoneware bottle. All the bottles are believed to be of nineteenth and twentieth century type, although it is difficult to date all but the stoneware bottle. The two full-size glass bottles are thought to be either wine or beer bottles. If the bottles have kicked bases, it would indicate a wine bottle, while a flat base would indicate a beer bottle. The squat cylindrical glass bottle was thought to be a port bottle, however if the base is flat, this could also be another example of a beer bottle. The small clear bottle with a long narrow neck is thought to have been used for foodstuffs, possibly a condiment of some sort. ​The ginger beer stoneware bottle is covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. This bottle relates to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectables, accessed November 2017). This stoneware ginger beer bottle was produced in Britain by the Doulton Lambeth Company. 'VI' stands for the crown colony of Vancouver Island. After the colonies were combined in 1866, most companies would switch to using BC or British Columbia. However, the bottles depicting 'VI' would still be used, as special orders for bottles like these could take months, if not more than a year, to reach the new colony, meaning that existing bottles were often recycled (Royal B.C. Museum Learning Portal, accessed November 2017).

MAS-D100068: WINE BOTTLE
Two green glass wine bottles that appear to have the flat band-like collar around the rim which is typical of Continental (particularly French) wine bottles; the type appeared around the middle of the 19th century. This particular shape was - and still is - referred to as a 'hock' or Rhine wine and was one of the three dominant styles of wine bottles that bridge the time from at least the mid-19th century to the present day. Hock wine bottles are of German or French origin and during the 19th century, typically contained both red and white Rhine and Mosel wines. The distinctive shape of these bottles is typified by being tall and slender with no sharp break where the body merges into the shoulder and the shoulder becomes the neck. They were typically free-blown or dip moulded, often exhibiting pontil scars where the glass was broken away from the rod. Hock wine bottles from the 19th and early 20th centuries are most often seen in shades of olive green or amber, but were produced commonly in a wide array of other colours (Society for Historical Archaeology webpage, accessed Sept 2017).

Six stoneware seltzer bottles, of a type used to carry mineral water from various Continental (mainly German) spas. The term 'seltzer' takes its name from the town of Selters in the lower Rhineland, one of the original producers of effervescent mineral waters. This cylindrical bottle type was used from the early 19th century through to the First World War. These types of bottles were produced by the specialist potters known as Krugbacker, or pot bakers, in the Westerwald region of Germany. These bottles, which changed little throughout the 19th century, were slender and cylindrical and colored reddish brown with straight, vertical sides. Bottles were stamped with marks indicating the bottling company, the jug baker's mark, the well number from which they were filled, and the town from which they were shipped (NMSC Archaeology & Museum Blog webpage, accessed September 2017).

Four stoneware bottles (three large and one smaller) that were probably used for beer, ale, stout or porter. Stoneware bottles provided the ultimate in protection from the detrimental effects of light but were very heavy. They were produced in Britain in the 1800s and many bottles found in the United States were even imported from here. All of these bottles have a feldspathic glaze over an ochre dip on the upper parts of the bottle giving them a darker colour on top. Feldspars (natural rocks of aluminosilicates) are used in stoneware and porcelain glazes because they fuse only at high temperatures. The feldspathic glaze dates the bottles to the 1830s or later while stoneware bottles were more or less superseded by glass by the first decade of the 20th century.

MAS-D100074: INK BOTTLE
A collection of four ink bottles; one large and three small. The larger stoneware ink bottle displays a pourer on the rim and is glazed with a feldspathic glaze. This type of ink bottle was introduced in the 1860s and were superseded by glass bottles by the first decade of the 20th century. Cylindrical stoneware ink bottles were made in England in large quantities throughout the Victorian era. The bottles varied widely in size and were not all brown. The larger or master bottles with a pouring lip brown bottles were commonly used for ink. The pouring spout would be used to distribute the ink in to smaller wells (Hume 2001). Of the three smaller stoneware ink bottles, two are glazed with a feldspathic glaze. This type of ink bottle was introduced in the mid-19th century and were superseded by glass bottles by the first decade of the 20th century. Small ink bottles or wells were usually no more than four inches high and did not have a pouring spout like the master bottles as they were intended to be dipped into (Hume 2001). These ink bottles came in two main varieties; very squat cinders or wide-based cones.

MAS-D100078: EGG CUP
One egg cup made of a refined whiteware.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is not until the Victorian era that eggcups were mass marketed and regularly offered with dinnerware services. Companies, like Wedgwood and Haviland, produced eggcups and decorated them in the styles of their bestselling china patterns although the example recorded here appears to be undecorated. It is thought that this example may date to the 19th or 20th century.

MAS-D100076: ROUNDED BOWL
Six small convex bowls that may have also functioned as cups or tea bowls. All the bowls are made of a refined whiteware and three of them display a hand painted decoration.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily, white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is thought that these examples may be tea wares dating to the 19th or 20th century.

MAS-D100079: CLAY PIPE (SMOKING)
All three pipes here are complete and are of the short or 'cutty' form. Two of the pipes measure 100 mm and have bowls in the form of a male head, wearing a thin-brimmed cap, while the third, which measures 120 mm, has a simple impression pattern around the outside of the rim. The male head on two of the pipes has previously been thought to represent a military figure or the head of a French soldier. They fall into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, that were common in the late 19th and early 20th centuries. Such decorative pipes would have been commonly exported. Tobacco was grown in West Africa from the 17th century, where the inhabitants made their own pipes. The manufacture evolved from that of pottery vessels, but they also imported some through the Atlantic trade (Knight 2010, 67), which is likely what these pipes represent.

MAS-D100080: PERFUME BOTTLE
Two clear glass perfume bottles. One has a square tapered body and measures 85 mm by 35 mm while the other measures 95 mm by 40 mm and has a round body complete with a round stopper and still contains yellow liquid. Perfume bottles were part of the vessel's cargo and many other bottles have been salvaged from the wreck by divers during recent years. Their form would be entirely consistent with a date around the turn of the 19th/20th century.

MAS-D100042: BOWL
Fragment of white ceramic bowl or lid marked with black and white geometric design and number '23'. Number appears to be hand-painted or stamped. Found loose on the seabed with a little marine growth present. This is a naval issue bowl probably used for drinking rather than smaller, handled cups, as they were more practical on board a ship. The number refers to the mess number, and the bowls were designed to be stored upside-down. The find dates to the late 19th or 20th century.

MAS-O100031: TIMBER
Possible ships timber or part of other marine or land based structure. Truncated rounded timber with hole and evidence of mounting plate for furniture, broken or rotted off at one end exposing heart wood and a knot in the wood. Approximately 2000 mm long and 600 mm in diameter. The undamaged half of the timber appears in good condition, implying a more recent date for the timber, whereas the other part appears to have suffered extensive degradation. The arrangement of damage to the timber suggests it may have been partially submerged during its useful life, possibly as part of a shore based instalment such as a jetty or quay.

MAS-O100026: SHIPS TIMBER
Two fragments of waterlogged wood with two copper fasteners dating from the post-medieval period onwards. The wood may be the remains of two planks of wood used in the construction of a ship as the planks are secured with one copper fastening and a hole is visible where another fastening may have also been used. Copper rivets are the standard method of fastening the planks to each other in clinker constructed vessels, or in the planks to the ribs or frames (Traditional Maritime Skills website, accessed September 2017). Clinker is a method of constructing the hull of a boat by fixing wooden planks so that the planks overlap along their edges. The overlapping joint is called a land. If the plank is too short for the hull, it would be necessary to extend the plank by joining with another piece of wood. Planks are also known as strakes (rubbing strake for example) so this method is also known as lapstrake. It is a very traditional method of ship construction. Metallic fastenings followed on from tree nails (also commonly known as trunnels and trennels), which were an older method of securing two planks together using wooden 'nails'.

MAS-100017: MAMMAL REMAINS
This cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema. Providing a relative date for this cattle mandible is challenging without further examination.

MAS-100016: UNIDENTIFIED OBJECT
This assemblage of metal objects includes an iron handle possibly inscribed with letters; a lead sailmakers palm guard; a bronze scribe; a small gun powder measure; a cup; and what are possibly a musket ball and a rivet; along with several other metal objects of unknown function. All the items appear to be post medieval in date. It is thought that these finds are either being washed into the area from another location or are being exposed by erosion, as each visit to the location reveals more objects.

MAS-100012: LANDING CRAFT INFANTRY
This hulk is situated on the River Deben, just outside of Melton (Suffolk) and is estimated to measure 11.5 m in length and 3 m in width. The structure is rectangular in shape with squared edges and straight sides. One end suggests the presence of a bulkhead and a hatch or doorway, while the other end is missing. Parts of possible rudder components are located close to the bulkhead, suggesting that this is the stern. Internal frames can be seen throughout the remaining structure; estimated measurements reveal a spacing of approximately 0.42 m. The hull is constructed of wood in a double diagonal layout, with metal plating over the top on the exterior of the hull. The hulk shows extensive deterioration and many of its fixtures and fittings have been stripped. A large proportion of the vessel is now missing. The shape, size and construction are all indicative of a British Landing Craft Assault (LCA) from the Second World War (WW2). The basic structure of this type of landing craft was a double diagonal wooden hull, commonly built using mahogany (Lavery 2009:20), although other timber species were used to keep up with the number of vessels required. Steel armour plating was then added as an outer skin. The overall length of an LCA was 12.7 m (41.6 ft) with a beam of 3 m (10 ft) (Royal Marines Museum). The main feature of LCA's was the bow ramp, used for amphibious landings such as on D-Day. This part of the vessel appears to be missing and may explain why the hulk has no bulkhead or bow features. The main use of the vessel was for troop transport; this featureless area took up most of the length of the hull. The internal frame spacing of LCA's was 0.45 m (Lavery 2009:21). At the after end of the troop compartment was a watertight bulkhead that separated the engine room (Lavery 2009:19). This bulkhead had a hatch for access by the stoker, which may be what is visible on the remaining hulk. After the engine room there was no further armour plating, which serves to explain the complete loss of the stern. It is difficult to positively identify this vessel as, athough the hulk displays several characteristics of an LCA, with the overall lack of structure it is possible that the remains may be of a barge or similar vessel.

MAS-100011: CLAY PIPE (SMOKING)
This is a very worn example of a 'cutty' (short) pipe (total length 115 mm) with a round-based spurless bowl imitating a briar pipe, and decorated with multiple 'thorns' - small pointed protrusions around the stem and bowl. This type of bowl was in use between c. 1850 and 1910 (Atkinson and Oswald 1969: type 30), and the thorn design was one of the many decorative types popular during this period (e.g. Ayto 1994:11; Hammond 2009: figure 7). Clay tobacco pipes were manufactured (using two-piece moulds) in huge quantities in many towns and cities around the UK and were also imported from the Continent. They were cheap, highly disposable items, often given away with a pint of beer by the local publican. The short 'cutty' pipes were popular with working men as they could be smoked while working, whereas the longer pipes were more for smoking at leisure. This clay pipe was found approximately 250 m outside the offshore designated area for the HMS Coronation wreck site. The period of the pipe's manufacture confirms that it is not associated with this vessel, which was wrecked in 1691. The pipe's location is thought to be within an extensive dumping site featuring artefacts dating from the 19th century through to the modern period.

MAS-100007: SPOON
This spoon is made of a metal alloy, possibly copper alloy, and was probably originally plated. Its manufacture would have been cast. The Royal Australian Air Force (RAAF) crest is stamped into the end of the spoon. The crest features the RAAF monogram with a laurel wreath surmounted by a crown. This crest is the same style as that used for cap badges and is modelled from a Royal Air Force (RAF) crest. The more widely adopted RAAF crest was commissioned and designed in 1937 and accepted in 1939. It is composed of the imperial crown mounted on a circle featuring the words 'Royal Australian Air Force' and overlaid with a wedge-tailed eagle. Beneath this the scroll work displays the Latin motto 'Per Ardua Ad Astra' (through adversity to the stars). This spoon may have been issued by the RAAF victualling department for squadron members to use in the mess, or to a particular individual as one item of their personal mess gear accompanied by crockery and other cutlery. It was the Australian Defence Force that adopted the cutlery moniker 'eating irons'. The spoon was discovered on Batten Beach, Plymouth, which is in proximity to RAF Mount Batten, a RAF station and flying boat base, and indicates the likely origin and time period of its loss, although it may have been produced any time after 1921, when the RAAF was formed.

MAS-1F5444: BEAD
Twenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing the layers to be seen from the side. These polychrome beads are of a type known as 'chevron' or 'rosetta' beads, which for several hundred years have been a speciality of the Venetian glassmakers. First appearing in the late 15th century, they were made from a short section of drawn-out hollow cane in a translucent greenish glass, coated with six further layers of white, translucent greenish, red and blue glass, and given a star-like cross-section by pressing in a 12-pointed corrugated mould; the canes were then cut into short lengths and the ends ground to expose the inner layers. Later beads may have fewer layers; they are still being made in Venice today, albeit in very small quantities. These beads can reach up to 90 mm in length and 60 mm in diameter, however the more common size is 20-30 mm in length and 10 mm in diameter. In the UK, chevron beads usually belong to 16th or 17th century contexts, but they were also made in quantity for export to West Africa and the Americas, and the peak of production came during the 19th and early 20th centuries. These later beads were usually of four and six layers, in red, blue and white. Chevron beads are still highly valued in present-day West Africa, where they continue to be worn for prestige and ceremonial purposes, and are occasionally buried with the dead.

MAS-100004: CLAY PIPE (SMOKING)
All three white pipes here are complete, and are of the short or 'cutty' form. Two carry relief moulded decoration featuring Masonic emblems (incorporating the crossed compass and square), while the third is in the form of a male head, wearing a thin-brimmed cap, possibly a military figure. Pipes with Masonic emblems were made from the mid-18th century in the UK, but remained popular into the early 20th century, while the male head falls into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, common in the late 19th and early 20th centuries. Such decorative pipes would have been commonly exported. Tobacco was grown in West Africa from the 17th century; the inhabitants made their own pipes, the manufacture evolving from that of pottery vessels, but they also imported some through the Atlantic trade (Knight 2010, 67). The inclusion here of the Masonic pipes is of interest; their use was not necessarily confined to Freemasons, but it is likely that they would have been of greater significance to smokers for whom the symbols they bore had meaning (White and Beaudry 2009, 220).

MAS-6105BA: FIREARM
This gun is a QF (quick firing) 6-pounder Hotchkiss, a light 2.25 inch (57 mm) naval and coastal defence gun from the late 19th century. The design appears to be pre-1890 as it does not have the recoil system that was introduced at that time. The original 1885 Mk I was a built-up gun with a vertical sliding-block breech. The name comes from the French manufacturing company, Hotchkiss, who were the major supplier of light QF guns in the world. This type of gun became a standard torpedo defence weapon; many navies bought this same type of gun (Friedman 2011).