2026-09-10T18:19:55+01:00https://marinefinds.org.uk/database/search/results/format/jsonhttps://marinefinds.org.uk/database/search/results/format/xmlhttps://marinefinds.org.uk/database/search/results/format/rsshttps://marinefinds.org.uk/database/search/results/format/atomhttps://marinefinds.org.uk/database/search/results/format/kmlhttps://marinefinds.org.uk/database/search/results/format/geojsonhttps://marinefinds.org.uk/database/search/results/format/qrcodehttps://marinefinds.org.uk/database/search/results112110finds-88MAS-100008MAMMAL REMAINSUNKNOWNThis tooth is a cattle (Bos spp) molar from the upper jaw. It has four crescentic cusps (polycuspid) forming a square crown, as well as four root elements. These characteristics are typical of selenodont teeth which are found in ruminant herbivores (e.g. cattle, goats, sheep, or deer). Viewed from the side, the crown of the tooth forms triangular profiles which, in combination with ridges, makes the sideways jaw motion of ruminants an effective way to break-up tough plant matter. Thus their function as crushing and grinding teeth. The alternating layers of enamel, dentine and cementum are exposed. The surface of the neck of the tooth is white and grey, however, there is also a distinct bluish tinge to parts of the tooth that may indicate the presence of the iron phosphate mineral, vivianite. The presence of vivianite attached to bones is generally accepted as evidence of subfossil status. Providing a relative date for this tooth is challenging as there are numerous reasons as to why it has not fully fossilised. It may be that not enough time has elapsed since the animal died, or the conditions in which the remains were deposited may not have been optimal for fossilisation. While the domestication of cattle occurred approximately 10,500 years ago in the Near East, it is generally accepted that domesticated cattle first appeared in England during the Neolithic (circa 4,000 BC) (Lynch et al. 2008).Ecofacts9363MAS2015-01-01T00:00:00ZVertebrate remainsWith finder2016-09-12T10:19:24Z2016-09-27T14:24:55Z811528425PAS57BC1B67001A23PAS57BC1E1600176F243674NorthumberlandNZ327955.1043857-1.50000143league.shunts.prices10MAS MASMASAnimal skeletal material10232CompleteGoodNEOLITHICx14337POST MEDIEVALx41047Coastal walkingSubmitted as wreck to the Receiver of WreckTooth01.JPG17images/MASMF2024-10-09T14:13:33.767Zfinds-1717MAS-100017MAMMAL REMAINSUNKNOWNThis cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema. Providing a relative date for this cattle mandible is challenging without further examination.Cattle are arguably the most important species of livestock - providing products such as meat, milk and leather; and strength for agricultural tasks (e.g. ploughing) (Zhang et al. 2013). The domestication of cattle (Bos spp) is generally accepted to have occurred around 10,500 years ago in the Near East (Zhang et al. 2013). Cattle dentition is an important archaeological signature of ancient cattle husbandry, as dentition varies between individual cattle due to genetics, diet and the geographical location in which they were raised. The age of an animal at death can also be determined by the stage of dental development and the wear of the mandibular teeth (McGrory et al. 2012: 3224).Ecofacts294113MAS2016-10-17T00:00:00ZVertebrate remainsIn situ2016-10-18T08:58:44Z2017-01-16T15:01:10Z172152825PAS57BC1B67001A23PAS57C96ECD001E82219687EssexTQ818251.507938610.60677648workroom.fragments.went10MAS MASMASAnimal skeletal material10232IncompleteMEDIEVALx14221MODERNCoastal walkingSubmitted as wreck to the Receiver of WreckIMG_20161016_080811389.jpg64images/MASMF2024-10-09T14:15:06.973Zfinds-1010MAS-100010FOOD AND DRINK SERVING CONTAINERROMANThis is a group of nine sherds of ceramic, of which six are samian ware (also called terra sigillata). Samian pottery is a mould-made, glossy red, mass-produced, fine tableware. It was first manufactured in northern Italy at the end of the 1st century BC, however by AD 43 production had moved to Gaul (France). The production of samian ware ended around AD 260. The following interpretation is based on the photographs associated with this record. An examination of the fabric and surviving decorative elements may provide further information on the region of manufacture or production centre and the identity of the potter, which can indicate a more accurate date of production. Images 1 & 4: A sherd of the base of a samian vessel, form unknown. The easily legible name-stamp is that of Advocisus who worked at Lezoux (Central Gaul) c. AD 160 to AD 200. Images 2 & 5: Three decorated samian sherds that all appear to be from form 37 bowls and are suspected to be from Central Gaul. All three have surviving decorative elements. Image 3: This smaller samian base sherd was probably part of a cup form. Interestingly, it has been observed that samian cup forms are very strongly represented in the Essex region, especially at rural sites, to a degree not seen elsewhere (Willis 2004). Image 5 (top right): The form of this non-samian sherd suggests that it is of 1st or earlier 2nd century AD date. Images 6 & 8: This is a Roman jug rim that was probably made in Britain. Image 7: This is the rim of an imported Roman amphora. Amphora are a type of wheel-thrown container used for the transport and storage of liquids and dry products. As an inexpensive container for the transport of goods, they were broken up and discarded at their destination rather than being reused.Samian vessels are known to occur in structured deposits associated with water, and therefore are interpreted to have played a role in the activities undertaken at such locations (Willis 2004). In some instances, in Britain, samian ware was a selected and prominent element within assemblages deposited in wells or shafts and other wet places (Willis 2004). Food preparation and consumption2121-1003001037/173MAS2016-09-14T00:00:00ZContainer by functionWith finder2016-09-28T09:50:33Z2017-04-13T10:05:01Z10952813925PAS57BC1B67001A23219687EssexTQ818251.507938610.60677648workroom.fragments.went10MAS MASMASCeramic10539OtherMouldedFragmentGoodROMANx41218ROMANx41218x41218Coastal walkingSubmitted as wreck to the Receiver of WreckMAS100010a.jpg27images/MASMF2024-10-09T14:13:34.321Zfinds-33MAS-1F5444BEADPOST MEDIEVALTwenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing the layers to be seen from the side. These polychrome beads are of a type known as 'chevron' or 'rosetta' beads, which for several hundred years have been a speciality of the Venetian glassmakers. First appearing in the late 15th century, they were made from a short section of drawn-out hollow cane in a translucent greenish glass, coated with six further layers of white, translucent greenish, red and blue glass, and given a star-like cross-section by pressing in a 12-pointed corrugated mould; the canes were then cut into short lengths and the ends ground to expose the inner layers. Later beads may have fewer layers; they are still being made in Venice today, albeit in very small quantities. These beads can reach up to 90 mm in length and 60 mm in diameter, however the more common size is 20-30 mm in length and 10 mm in diameter. In the UK, chevron beads usually belong to 16th or 17th century contexts, but they were also made in quantity for export to West Africa and the Americas, and the peak of production came during the 19th and early 20th centuries. These later beads were usually of four and six layers, in red, blue and white. Chevron beads are still highly valued in present-day West Africa, where they continue to be worn for prestige and ceremonial purposes, and are occasionally buried with the dead.These beads were recovered from the wreck of ​Loanda​, along with three clay pipes recorded as MAS-100004. ​Built in 1891 at Barrow-in-Furness (Cumbria) by the Naval Construction and Armaments Co., Loanda was a two-masted screw-driven steamer owned by the British and African Steam Navigation Co. On 31 May 1908, following a collision with SS Junona, Loanda foundered while under tow 1 mile east of St Margaret's at Cliffe, Kent. At the time of loss, the vessel was bound from Hamburg, Germany, to West Africa with a general cargo. This cargo, which has seen significant recovery by divers, included: clay pipes; bottles of wine and gin; glass beads; perfume bottles; pencils, writing slates and inkpots; lamps; and teacups, lids, dishes, pots, saucers, plates, jugs and eggcups. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Loanda.Dress and personal accessories3641150019081196/163MAS2016-07-12T00:00:00ZJewellery901835Kent HER Number: TR 34 SE 108; TR 45 NE 256; TR 34 SE 112With finder2016-08-03T14:44:36Z2016-09-30T11:57:40ZPAS57A1F5440013D68252618284317115PAS57BC1B67001A23PAS57BC1E1600176F218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS-1FC389MAS MASMASGlass10879OtherDrawnCompleteFairPOST MEDIEVALx41047MODERNx41047DivingSubmitted as wreck to the Receiver of WreckP1050090.JPG2images/MASMF2024-10-09T14:04:48.598Zfinds-99MAS-100009SHOTPOST MEDIEVALThis is an assemblage of six round cast iron and stone projectiles of varying sizes. Due to the ubiquitous nature of their design, it is difficult to accurately date cannonballs with any certainty. This issue is compounded by the wide variation in designs and calibres of the cannons that fired them and the lifespan of the weapon, with obsolete designs often still in use on merchant ships long after they had fallen out of service with the various navies of Northern Europe, who also used captured weapons on their vessels. Cast iron cannonballs are thought to have appeared at some point during the 15th century and were used as late as the last quarter of the 19th century, having gradually superseded stone cannonballs. By this time, rifled artillery had become the norm. From their general condition and flaking, these examples are heavily corroded. The round shot of speckled appearance could be granite, and may pre-date the cast iron round shot. An element of lead may also be involved in the manufacture of some of the shot in this assemblage. The following potential identifications are based on the associated images for this record. Images 1, 2 & 4: Left: 4¼ inch iron cannonball, originally weighing approximately 10 pounds. A shot of this size may have been fired by a demi culverin. Demi culverin guns fired round shot of 4 - 4½ inch diameter weighing approximately 12 pounds (Collins 2016). The breaks may have happened after deposition due to the rusting and fracturing of iron. Middle: 3¼ inch iron cannonball, originally weighing approximately 5 pounds. A shot of this size may have been fired by a saker. Saker guns fired round shot of 3 - 3¾ inch diameter weighing approximately 6 pounds (Collins 2016). Right: 3¾ inch iron cannonball, originally weighing approximately 7 pounds. A shot of this size may have been fired by a saker. This is only a fragment of the cannonball, about two-thirds remain. Images 3, 5 & 6: Left: 2 inch stone shot (possibly granite), originally weighing approximately 1 pound. A shot of this size may have been fired by a falcon. Falcon ordnance of 2½ inch calibre fired round shot weighing approximately 1½ pounds (Collins 2016). Middle: 1¾ inch possible lead alloy shot, originally weighing approximately 12 ounces. A shot of this size may have been fired by a base. Base ordnance of 1½ inch calibre fired round shot weighing approximately ½ a pound (Collins 2016). Right: 1¼ inch possible lead alloy shot, originally weighing approximately 4 ounces. A shot of this size may have been fired by a musket. A musket is a long gun, fired from the shoulder, which is muzzle-loaded and has a smooth bore (Collins 2016).Armour and weapons3639160018751036/173MAS2016-09-14T00:00:00ZAmmunitionWith finder2016-09-28T09:40:32Z2017-04-13T10:06:30Z968282145PAS57BC1B67001A23219687EssexTQ818251.507938610.60677648workroom.fragments.went10MAS MASMASIron11019CastIncompleteCorrodedPOST MEDIEVALx41047NINETEENTH CENTURYx41047Coastal walkingSubmitted as wreck to the Receiver of WreckMAS100009Shot123a.jpg21images/MASMF2024-10-09T14:13:34.028Zfinds-44MAS-100004CLAY PIPE (SMOKING)POST MEDIEVALAll three white pipes here are complete, and are of the short or 'cutty' form. Two carry relief moulded decoration featuring Masonic emblems (incorporating the crossed compass and square), while the third is in the form of a male head, wearing a thin-brimmed cap, possibly a military figure. Pipes with Masonic emblems were made from the mid-18th century in the UK, but remained popular into the early 20th century, while the male head falls into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, common in the late 19th and early 20th centuries. Such decorative pipes would have been commonly exported. Tobacco was grown in West Africa from the 17th century; the inhabitants made their own pipes, the manufacture evolving from that of pottery vessels, but they also imported some through the Atlantic trade (Knight 2010, 67). The inclusion here of the Masonic pipes is of interest; their use was not necessarily confined to Freemasons, but it is likely that they would have been of greater significance to smokers for whom the symbols they bore had meaning (White and Beaudry 2009, 220).These clay pipes were recovered from the wreck ​Loanda, along with 26 beads recorded as MAS-1F5444. Built in 1891 at Barrow-in-Furness (Cumbria) by the Naval Construction and Armaments Co., Loanda was a two-masted screw-driven steamer owned by the British and African Steam Navigation Co. On 31 May 1908, following a collision with SS Junona, Loanda foundered while under tow 1 mile east of St Margaret's at Cliffe, Kent. At the time of loss, the vessel was bound from Hamburg, Germany, to West Africa with a general cargo. This cargo, which has seen significant recovery by divers, included: clay pipes; bottles of wine and gin; glass beads; perfume bottles; pencils, writing slates and inkpots; lamps; and teacups, lids, dishes, pots, saucers, plates, jugs and eggcups. NRHE and Kent HER reference numbers cited in this record refer to the wreck of Loanda.Dress and personal accessories3641175019081196/163MAS2016-07-12T00:00:00ZPersonal accessory901835Kent HER Number: TR 34 SE 108; TR 45 NE 256; TR 34 SE 112With finder2016-07-28T14:12:59Z2019-01-29T13:01:43Z4401253528439115PAS57BC1B67001A23PAS57BC1E1600176F218210KentTR384451.14575261.4013985ramp.slouched.ambient10MAS-A50DBFMAS MASMASCeramic10539OtherMouldedCompleteFairPOST MEDIEVALx41047MODERNx41047DivingSubmitted as wreck to the Receiver of WreckP1050093.JPG3images/MASMF2024-10-09T14:14:02.986Zfinds-1616MAS-100016UNIDENTIFIED OBJECTPOST MEDIEVALThis assemblage of metal objects includes an iron handle possibly inscribed with letters; a lead sailmakers palm guard; a bronze scribe; a small gun powder measure; a cup; and what are possibly a musket ball and a rivet; along with several other metal objects of unknown function. All the items appear to be post medieval in date. It is thought that these finds are either being washed into the area from another location or are being exposed by erosion, as each visit to the location reveals more objects.36411038/173MAS2016-10-16T00:00:00ZWith finder2016-10-17T10:36:11Z2017-08-15T10:49:03Z16172835PAS57BC1B67001A23PAS57BC21F300115B219687EssexTQ818251.507938610.60677648workroom.fragments.went10MAS MASMASUncertainPOST MEDIEVALx41047MODERNx41047Coastal walkingSubmitted as wreck to the Receiver of WreckMAS100016b.jpg56images/MASMF2024-10-09T14:15:06.736Zfinds-2020MAS-100020JARPOST MEDIEVALPottery sherd: a rim sherd from a Post Medieval glazed redware flanged bowl with a horizontal looped side handle. The sherd dates to the 17th/18th century. The manufacture and origin of the sherd is unknown due to the mass production of this type of kitchenware.Container3636160018001390/163MAS2016-10-31T00:00:00ZFood and liquid storage containerWessex Archaeology, Salisbury2016-12-13T09:55:35Z2017-04-03T11:14:33Z201528154PAS57C96ECD001E82PAS57BC21F300115B218210KentTR188251.494889831.13915054flipside.fearfulness.underpinned10MAS MASMASCeramic10539FragmentEncrustedPOST MEDIEVALx41047POST MEDIEVALx41047x41047Other chance findSubmitted as wreck to the Receiver of WreckPC120161.JPG74images/MASABB2024-10-09T14:15:07.95Zfinds-1818MAS-100018COSTRELPOST MEDIEVALA salt-glazed stoneware barrel costrel, almost certainly German and probably dating to the 17th century. Recovered in 1966 during a dive at a depth of approximately 50-60 ft, and found in association with two lots of cannon, cannonballs and lead sheeting.EMContainer36361600169913MAS2016-10-19T00:00:00ZFood and liquid storage containerWith finder2016-10-21T13:09:27Z2018-05-23T14:04:36Z181202829152-2.4749.45namely.bumps.misnamedMAS MASMASStonewareMouldedIncompletePOST MEDIEVALx41047POST MEDIEVALx41047x41047DivingSubmitted as wreck to the Receiver of WreckMAS100018a.jpg66images/MAS2024-10-09T14:15:07.249Zfinds-2828MAS-O100028BOTTLEPOST MEDIEVALA bottle made from dark green/black glass, bearing a protruding cork. It has a slightly concave body, flaring moderately at the base, leading to gently rounded shoulders with clear definition where they intersect with the neck. The neck itself is broadly straight, tapering slightly where it meets the finish. The finish is of either a double oil or brandy type. The bottle is reminiscent of a spirit bottle of the squat cylinder style, though vessels of this style were used to contain a variety of products beyond beers, wines and spirits. Bottles of this type were manufactured from at least the 1730's until the late 19th century, examples of both free blown and moulded vessels are known. This bottle is likely to have been hand blown in a mould, it bears a slight lean from the base but otherwise appears uniform.Container3639015/183MAS2017-02-22T00:00:00ZFood and liquid storage container2017-02-25T10:51:15Z2020-02-21T11:59:00Z2811814414213PAS5C5037EF001C03225469Isle of WightSZ629150.71533209-1.12317252corrupted.provider.spud10MAS MASMASGlass10879Wood11988BlownCompleteGoodPOST MEDIEVALx41047NINETEENTH CENTURYx41047UnknownFB_IMG_1488019587915.jpg87images/MASPT2024-10-09T14:15:10.005Z