Record ID: MAS-100007
Object type: SPOON
Broad period: MODERN
County: Devon
Workflow stage: Published
This spoon is made of a metal alloy, possibly copper alloy, and was probably originally plated. Its manufacture would have been cast. The Royal Australian Air Force (RAAF) crest is stamped into the end of the spoon. The crest features the RAAF monogram with a laurel wreath surmounted by a crown. This crest is the same style as that used for cap badges and is modelled from a Royal Air Force (RAF) crest. The more widely adopted RAAF crest was commissioned and designed in 1937 and accepted in 1939. It is composed of the imperial crown mounted on a circle featuring the words 'Royal Austra…
Created on: Thursday 8th September 2016
Last updated: Wednesday 14th December 2016
Spatial data recorded.

Record ID: MAS-D100115
Object type: CARTRIDGE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Images of this find were sent to Trevor Parker of the Ordnance Society. He confirmed that these three shell cases belong to a six-pounder Hotchkiss gun. This particular type of gun was introduced in 1884 for use against torpedo boats. They were used during First World War on the Arethusa and early 'C' class cruisers and a few submarines as well as on Monitors M.15 through M.33. Originally French in origin, they were introduced to Britain in 1886 (Tucker 2013). Many were subsequently used as sub-calibre and saluting guns which meant that they were still available in 1939 (Naval Weapons,…
Created on: Friday 8th September 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-O100124
Object type: BRASS
Broad period: POST MEDIEVAL
Workflow stage: Published
One ornate brass piece. The piece has an aperture in the middle, in the centre of a circular disc which is itself recessed slightly into the surface. The disc extends laterally into two leaf-shaped limbs, which are decoratively styled and form curved arrows at their tips. At the end of each limb there is a circular hole, which was likely used to fasten the brass piece to its host object. These holes are countersunk, presumably to accommodate the heads of screws. The piece is approximately 90 mm in length, with a width of 40 mm and thickness of 2 mm. The diameter of the two larger holes…
Created on: Monday 11th September 2017
Last updated: Friday 27th March 2020
Spatial data recorded.

Record ID: MAS-D100128
Object type: HINGE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This record refers to the metal hinge and attached timber shown in the top left corner of image one, the other finds are dealt with under separate records. The object is approximately 305 mm in overall length and 204 mm in overall width. For the hinge element of the object only one leaf can be observed from the photo, which measures approximately 64 mm by 127 mm. Given the leaves are likely to be identical in size, this would suggest the overall width is approximately 127 mm making a regular square when fully opened. The metal of the hinge is in generally good condition, with some blu…
Created on: Monday 9th October 2017
Last updated: Wednesday 22nd April 2020
No spatial data available.

Record ID: MAS-D100173
Object type: CLOCK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks. Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 9th April 2020
Spatial data recorded.

Record ID: MAS-D100174
Object type: CUTLERY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100184
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
A single piece of copper alloy sheeting, measuring approximately 70 mm by 55 mm with a thickness of c. 2 mm. The item bears 4 grooves pressed into the metal along the long axis on one face, only one of which is evident on the opposite face. The item appears to be distorted from its original shape, all the edges appear intact suggesting it is otherwise complete. The function of such an item is unclear, though it was recovered in close proximity to a swivel gun (MAS-D100180) and may relate to the functioning of such a weapon in some way.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100193
Object type: ENGINE
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100220
Object type: VALVE
Broad period: MODERN
County: East Sussex
Workflow stage: Published
Two small brass valves and one small double valve. The first item has three conections, with two sections of thinner pipe (10 mm diameter approx) still attached perpendicular to threaded fixing, and both twisted. The thicker pipe (38 mm approx) runs parallel and opposite to threaded fixing. In all cases the rest of the pipes have sheared off. The second valve is similar in characteristics to the first, with three connections and a threaded fixing. This valve is slightly smaller and less encrusted, and only one section of thin (10 mm approx) pipe attached perpendicular to threaded fixin…
Created on: Friday 21st September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100221
Object type: VALVE
Broad period: MODERN
County: Kent
Workflow stage: Published
One brass stopper and one brass valve. The valve has spherical central body, with three different piped connections conjoining at right angles, each indentical in style; circular and 30 mm long, with a 180 mm approximate diameter. It is wheel-operated, with the wheel shaft thinner than the piped connections at 25 mm, before expanding to a larger shaft with diameter of 65 mm. The condition of the valve is heavily corroded and encrusted with metal growths. The stopper is in a similar condition, although one nut and bolt at its centre appears to be in fair condition.
Created on: Friday 21st September 2018
Last updated: Wednesday 19th February 2020
Spatial data recorded.

Record ID: MAS-D100219
Object type: VALVE
Broad period: MODERN
County: East Sussex
Workflow stage: Published
One small brass expansion valve. It is wheel operated from two opposite ends, roughly 260 mm apart. Approximately 50 mm in from each wheel there is a piped connection with the pipes roughly 25 mm diameter and both kinking into a right angle. Between the two wheels and the pipe connection, at the centre of the expansion valve, is a large metal boss, possibly where the two ends were fixed together. Item is heavily corroded and in poor condition.
Created on: Friday 21st September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100233
Object type: UNIDENTIFIED OBJECT
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find appears to be some form of decorative finial manufactured from a non-ferrous metal, possibly a copper alloy. It measures approximately 356 mm in length, 102 mm in width at the base and 127 mm in width at the widest point just below the top of the object. The base appears to be damaged, though clearly separates into three possible legs or feet. Approximately 76 mm from the base it seems to narrow slightly, possibly due to bearing a ring decoration, though this is difficult to ascertain due to the level of encrustation on the object. The shaft of the item extends for a further …
Created on: Wednesday 10th October 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100228
Object type: VALVE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This copper alloy valve has a spherical central body with three sperate connections. One of the connections has a 25 mm long male thread evident, whilst the remaining two are concealed by concretion. One of the connections is probably a female thread entry and the third of the connections an elbow pipe union. The diameter of the connections is approximately 30 mm. Overall dimensions are approximately 100 mm by 100 mm. The exact purpose of such a valve is not immediately apparent, though it likely relates to the vessels' operation and machinery rather than any cargo. As a coal powered …
Created on: Tuesday 25th September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.