Record ID: MAS-D100207
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Long necked glass bottle in clear or aqua marine glass. Overall height of 210 mm from base to finish, the height of body from base to shoulder being 120 mm. The finish being of the applied style, bearing a ring of glass approximately 15 mm wide over a further ring extending a further 5-10 mm down the neck. The base of the vessels exhibits a slightly concave punt <10 mm deep. In profile the body appears to be of a flattened hexagon shape, approximately 70 mm wide. the largest pane of the hexagonal shape being 45 mm across. The contraction from body to neck is severe, narrowing to 30 …
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100197
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Six glass gin bottles. 'Case gin' or 'taper gin' bottles have a square cross section that means that packing became more effective than with round bottles. The bodies taper wider towards a sharp shoulder, short neck and a champagne finish. The bottles are olive green in colour, and are in a fair condition despite encrusting towards the neck. This shape and style of bottle originated in and was commonly made in Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later and may therefore be earlier …
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-O100053
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
One gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine …
Created on: Monday 29th May 2017
Last updated: Monday 19th March 2018
Spatial data recorded.

Record ID: MAS-D100038
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Four glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - …
Created on: Sunday 21st May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-1F5444
Object type: BEAD
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Twenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing th…
Created on: Wednesday 3rd August 2016
Last updated: Friday 30th September 2016
Spatial data recorded.