Record ID: MAS-1F5444
Object type: BEAD
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Twenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing th…
Created on: Wednesday 3rd August 2016
Last updated: Friday 30th September 2016
Spatial data recorded.

Record ID: MAS-O100028
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Published
A bottle made from dark green/black glass, bearing a protruding cork. It has a slightly concave body, flaring moderately at the base, leading to gently rounded shoulders with clear definition where they intersect with the neck. The neck itself is broadly straight, tapering slightly where it meets the finish. The finish is of either a double oil or brandy type. The bottle is reminiscent of a spirit bottle of the squat cylinder style, though vessels of this style were used to contain a variety of products beyond beers, wines and spirits. Bottles of this type were manufactured from at lea…
Created on: Saturday 25th February 2017
Last updated: Friday 21st February 2020
Spatial data recorded.

Record ID: MAS-D100038
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Four glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - …
Created on: Sunday 21st May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100040
Object type: BOTTLE
Broad period: POST MEDIEVAL
Workflow stage: Published
One onion bottle dated to c.1700. Glass onion bottles were large hand-blown glass bottles, used aboard sailing ships to hold wine or brandy. For increased stability on rough seas, the bottles were fashioned with a wide-bottom shape to prevent toppling. Between c.1690 and c.1720 the outline of a wine bottle resembled an onion - a wide compressed globular body and a short neck (Robinson and Harding 2015). Most bottles before 1700 had a ring of glass just below the neck that gave anchorage to the string used to hold in variety of stoppers. The Dutch bottles usually had a longer neck than…
Created on: Tuesday 23rd May 2017
Last updated: Wednesday 4th October 2017
No spatial data available.

Record ID: MAS-D100045
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Base of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.
Created on: Tuesday 30th May 2017
Last updated: Friday 28th February 2020
Spatial data recorded.

Record ID: MAS-D100197
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Six glass gin bottles. 'Case gin' or 'taper gin' bottles have a square cross section that means that packing became more effective than with round bottles. The bodies taper wider towards a sharp shoulder, short neck and a champagne finish. The bottles are olive green in colour, and are in a fair condition despite encrusting towards the neck. This shape and style of bottle originated in and was commonly made in Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later and may therefore be earlier …
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.