Record ID: MAS-D100233
Object type: UNIDENTIFIED OBJECT
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find appears to be some form of decorative finial manufactured from a non-ferrous metal, possibly a copper alloy. It measures approximately 356 mm in length, 102 mm in width at the base and 127 mm in width at the widest point just below the top of the object. The base appears to be damaged, though clearly separates into three possible legs or feet. Approximately 76 mm from the base it seems to narrow slightly, possibly due to bearing a ring decoration, though this is difficult to ascertain due to the level of encrustation on the object. The shaft of the item extends for a further …
Created on: Wednesday 10th October 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100232
Object type: INK BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Four small stoneware cylindrical ceramic inkwells. The ceramic is made of a light brown paste with a salt-glazed surface. The dimensions are 45 mm in diameter by 50 mm high. This type of inkwell was commonly known as a "penny ink" bottle. They were corked, sealed with sealing wax and cost a penny each. They contained writing ink. This type of ink bottle was introduced in the mid-19th century and were superseded by glass bottles by the first decade of the 20th century. Small ink bottles or wells were usually no more than four inches high and did not have a pouring spout like the maste…
Created on: Tuesday 2nd October 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100230
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Three bottles of blown glass. The frst two bottles are torpedo or Hamilton´s type bottle (Hamilton introduced this type of blow molding) from the mid-nineteenth century dedicated to containing carbonated water or 'soda'. Both are light blue/green 'aqua' glass and measure 250 mm long and have a diameter of 75 mm with a 'bottom-weighted' blob finish. The inscription "Aerated Water" "Bombay" makes reference to the content and place of distribution, something that manufacturers of this type of packaging commonly did. The design ensured that the bottles would be stored on their side, keepi…
Created on: Tuesday 2nd October 2018
Last updated: Wednesday 1st April 2020
Spatial data recorded.

Record ID: MAS-D100229
Object type: BOWL
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Four pieces of hand-decorated tableware. There are two bowls of 75 mm diameter and 55 mm high. The other two pieces are two pearly white plates with 122 mm diameter. They probably belong to the cargo or tableware of the wreck SS Strathclyde that sank in 1876 thereofre can be dated to the end of the 19th century. Any stamps or markings on the base of the tableware would give more inidcation as to the location and date of manufacture.
Created on: Tuesday 2nd October 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100228
Object type: VALVE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This copper alloy valve has a spherical central body with three sperate connections. One of the connections has a 25 mm long male thread evident, whilst the remaining two are concealed by concretion. One of the connections is probably a female thread entry and the third of the connections an elbow pipe union. The diameter of the connections is approximately 30 mm. Overall dimensions are approximately 100 mm by 100 mm. The exact purpose of such a valve is not immediately apparent, though it likely relates to the vessels' operation and machinery rather than any cargo. As a coal powered …
Created on: Tuesday 25th September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100227
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Bordeaux style bottle manufactured in clear aquamarine coloured glass, though weathering has caused the colours to distort and becom pearlescent towards the base of the vessel. It has a wide and straight neck and is finished in the applied ring or champagne style. The body is cylindrical, with low profile rounded shoulders. The height of the bottle is approximately 230 mm, the diameter of the body 60 mm and the neck 30 mm. Though this bottle is smaller than the more common 300 mm tall, 750 ml wine bottles it is most likely a wine bottle. It's clear colour suggests a dessert or sweet wi…
Created on: Tuesday 25th September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100207
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Long necked glass bottle in clear or aqua marine glass. Overall height of 210 mm from base to finish, the height of body from base to shoulder being 120 mm. The finish being of the applied style, bearing a ring of glass approximately 15 mm wide over a further ring extending a further 5-10 mm down the neck. The base of the vessels exhibits a slightly concave punt <10 mm deep. In profile the body appears to be of a flattened hexagon shape, approximately 70 mm wide. the largest pane of the hexagonal shape being 45 mm across. The contraction from body to neck is severe, narrowing to 30 …
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100206
Object type: BOTTLES
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find comprises of four stoneware bottles with the inscription "A PHILLIPS VICTORIA VI" and one stoneware ink bottle inscribed "BLACKWOODS" bearing a pouring lip. All vessels are constructed in a cream stoneware ceramic with a clear glaze. The four A PHILLIPS bottles are approximately 220 mm in overall height (150 mm from heel to sharply angled shoulder), with an exterior diameter of 80 mm in the body and 30 mm at the finish. The finish is of a type known as an applied finish, from glass bottle construction where an additional strip of glass is applied around the rim of the bottle…
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100205
Object type: TOBACCO PIPE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Complete example of a clay tobacco pipe of the bent billiard style, probably dating to the 19th century. Overall length of 80 mm, with the stem being 50 mm in length. The "short stem" is circular in profile at the heel, changing to a hexaganol profile 20 mm from the mouth piece, which bears beading around the aperture. The left hand side of the stem, from the users perspective, bears a cartouche comprising an embossed diamond lozenge in turn enclosing an incised inscription of SQUATTERS OWN. The opposite side of the stem bears an identical lozenge enclosing the incised word SYDNEY. The…
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100199
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This find is a small medicine style bottle in green glass. No scale was provided but these vessels are usually 160 - 190 mm in overall height. The vessel is flat bottomed with a rectangular shape in plan, with the short sides being rounded. it has a short but wide neck ending in a bead type finish, common to medicine bottles. Embossed on the shoulders of the vessel is the word KEPLER, which refers to the product which it contained. The base is embossed with SNOW HILL, B. W. & Co, LONDON, which refers to the manufacturer and their factory in London. The condition of the vessel is go…
Created on: Wednesday 4th July 2018
Last updated: Wednesday 19th February 2020
No spatial data available.

Record ID: MAS-D100198
Object type: CUP
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Find consists of a fragment of a porcelain cup, representing about 1/4 - 1/3 of the total vessel including a complete base bearing a backstamp of BRYONIA U & C. Though only partially surviving, what remains is in fair condition with evidence of slight encrustation around the base. No scale was provided, however, other examples of this pattern and manufacturer have a diameter of c. 75 mm. The U & C inscription refers to Utzschneider & Co, a company based originally in Sarreguemines, North East France. This region was previously part of Alsace-Lorraine and therefore the manuf…
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100196
Object type: CLAY PIPE (SMOKING)
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Five small smoking pipes that are complete, four small smoking pipes that are broken, one large smoking pipe that is complete, six large smoking pipe that are broken. The pipes are mainly derived from two different styles: the long-stemmed style and the short-stemmed. The longer-stemmed bears no decoration or cartouche, along with absence of heel. The bowl is large, owing perhaps to the fall in tobacco prices in the 19th century and would have most likely been a cheap item. The shorter-stemmed pipes display ornate decoration on the bowl, in the form of a hatted head, and are made from…
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100194
Object type: BOWL
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One complete round bowl with a diameter of 241.3 mm and one part of a broken plate, both displaying the markers mark. Both pieces of ceramics have dark coloured decorative bands running around the outside and inside rim and have fractal cracks present. The white ceramic also has brown blemishes in places, but overall is in fair condition. The symbol crest in the centre of the bowl is a shield with "H.A.P. A.G" inscribed, overlying an anchor. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. It…
Created on: Saturday 23rd June 2018
Last updated: Wednesday 19th February 2020
Spatial data recorded.

Record ID: MAS-D100193
Object type: ENGINE
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100192
Object type: PERSONAL ACCESSORY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One gold T piece to believe part of a watch chain. These pieces were used to fasten the watch chain to an item of clothing, most often a wasitcoat. The T piece has a rounded embossing in the centre of the strip, with a small ring attached at this point for attaching the piece to a chain. The right end of the piece has a single ringed pattern shortly before terminating in a straight clean end. The left side of the piece has steps from the thicker piece to a thinner section extruding out a short distance. Given the date of sinking of the vessel from which it was recovered this item can r…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100191
Object type: COIN
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find comprises of a single gold coin from the USA with a value of $10. This 1847 minted coin was created for standard circulation and measures 27 mm in diameter with a weight of 16.72 grammes, the coin is minted in an alloy of 90% gold and 10% copper. It is of a type known as a Coronet Head - Eagle, based on the depictions on each face. The head side shows a side profile of lady liberty wearing a coront inscribed with the word "LIBERTY", the obverse bearing a spread eagle with a crest upon it and the words "UNITED STATES OF AMERICA TEN D." inscribed around the circumference of the…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100190
Object type: CONTAINERS
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Published
This find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and t…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100175
Object type: SHIP FITTINGS
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two brass deck water filler plates and one ceramic door number (45). The water filler plates are 150 mm in diameter and approximately 100 mm thick. They are both heavily degraded and concreted, distorting their 'mushroom-shaped' original form. It appears they have screws running through the wider top surface and hanging down below next to the tinner plug interior. The screws are approximately 50 mm long and 5 mm in diameter. This type of ships fiitting is used to provide an access point by which to fill water tanks on a vessel and are common on many vessels, from pleasure craft to com…
Created on: Wednesday 9th May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100138
Object type: CONTAINERS
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two shards of crockery with makers mark present. The stamp is made up of letters "H A P A G" and a stylised admiralty anchor which has a wooden stock behind a shield. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. The stamps would have been on the base of the corckery therefore it is not clear whether these pieces would have belonged to bowls or plates when they were in use. The shards are white, with dark flecked inclusions and yellowish patches. It is more than likely that these pieces we…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100146
Object type: UNIDENTIFIED OBJECT
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Find consists of an ornate metal piece, bearing a flyr de lys type of design above a solid bar, presumably used for mounting. No dimensions were given, though it is suggested to be made from lead and H shaped, the finder described it as "part of a fireguard from the ship room". This material type would seem unsuitable for such a purpose, therefore it is still unclear what the purpose of this object is, although it is generally accepted that it is a decorative object of some sort.
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100173
Object type: CLOCK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks. Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 9th April 2020
Spatial data recorded.

Record ID: MAS-D100174
Object type: CUTLERY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100133
Object type: BOTTLES
Broad period: POST MEDIEVAL
Workflow stage: Published
Two clear glass fruit bottles, one ornate green glass wine bottle, one tall brown wine bottle with glass hexagonal base (94 stamped on base) and one black glass bottle. The fruit bottles are 280 mm long and 70 mm wide. One appears to be more encrusted and discoloured than the other, but both are consistent in their shape. They possess straight bodies, abrubtly curving shoulders and straight necks running to applied finishes. One is still stoppered and contains what appears to be olives. Both are indicative of fruit bottles in style and shape. The two wine bottles differ in appearance…
Created on: Monday 23rd October 2017
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-D100132
Object type: INK BOTTLE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
One stoneware ink bottle. Ink bottles or inkwells were made of various materials including glass, various metals, various stones, various woods, horn, ceramics and stoneware, and even hard rubber. Prior to beginning of the 19th century, virtually all ink came in ceramic containers which were still commonly used throughout most of the 19th century. Stoneware bottles were superseded by glass bottles by the first decade of the 20th century. Ink bottles of this size are known as the bulk or master ink bottles (https://sha.org/bottle/household.htm, accessed March 2020). The master bottles …
Created on: Monday 23rd October 2017
Last updated: Monday 30th March 2020
No spatial data available.

Record ID: MAS-D100156
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
Three salt glazed stoneware bottles. This form of bottle was a type used to carry seltzer water and gin. Seltzer water was exported by various Continental (mainly German) spas. The term 'seltzer' takes its name from the town of Selters in the lower Rhineland, one of the original producers of effervescent mineral waters. This cylindrical bottle type was used from the early 19th century through to the First World War and were produced by the specialist potters known as Krugbacker, or pot bakers, in the Westerwald region of Germany. These bottles, which changed little throughout the 19t…
Created on: Monday 23rd October 2017
Last updated: Monday 30th March 2020
No spatial data available.

Record ID: MAS-D100128
Object type: HINGE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This record refers to the metal hinge and attached timber shown in the top left corner of image one, the other finds are dealt with under separate records. The object is approximately 305 mm in overall length and 204 mm in overall width. For the hinge element of the object only one leaf can be observed from the photo, which measures approximately 64 mm by 127 mm. Given the leaves are likely to be identical in size, this would suggest the overall width is approximately 127 mm making a regular square when fully opened. The metal of the hinge is in generally good condition, with some blu…
Created on: Monday 9th October 2017
Last updated: Wednesday 22nd April 2020
No spatial data available.

Record ID: MAS-D100129
Object type: BOTTLES
Broad period: POST MEDIEVAL
Workflow stage: Published
Two bottles with dark glass. Both appear to be 250 mm from finish to base and 50 mm in diameter. One bottle is dark green and the other black. Both have been encrusted and marked with biological activity, which could be mistaken for ornate symbols and badges. Neither are corked or stoppered. Both are very similar in style with straight bodies, rounded and slightly abrupt shoulders that lead into slightly bulging necks before an applied wine finish. From this shape and size, both bottles are assumed to be wine bottles, or perhaps liquor bottles from the 19-20th century. The finish of …
Created on: Monday 9th October 2017
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-D100150
Object type: LID
Broad period: MODERN
Workflow stage: Published
One copper item, thought to be a lid by discoverer. It is around 180 mm in diameter with greenish brown discolouration from the oxidising of the copper. At its centre there is a raised disc that has been possibly beaten out of the original shape. This circular embossed disc is approximately 90 mm in diameter and has a small circular aperture in its centre (roughly 10 mm diameter). Other than a lid, the item could be a lamp shade of some sort or a hub of some wheeled apparatus.
Created on: Monday 9th October 2017
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-D100115
Object type: CARTRIDGE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Images of this find were sent to Trevor Parker of the Ordnance Society. He confirmed that these three shell cases belong to a six-pounder Hotchkiss gun. This particular type of gun was introduced in 1884 for use against torpedo boats. They were used during First World War on the Arethusa and early 'C' class cruisers and a few submarines as well as on Monitors M.15 through M.33. Originally French in origin, they were introduced to Britain in 1886 (Tucker 2013). Many were subsequently used as sub-calibre and saluting guns which meant that they were still available in 1939 (Naval Weapons,…
Created on: Friday 8th September 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-F100106
Object type: LADDER
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
These two timbers are two components of a companion ladder. The larger piece measures 1.14 m long by 0.15 m wide and based on the visible ridges to accommodate the stairs, would have been the left-hand side banister of the ladder. The smaller piece measures 0.56 m wide and is 20 mm thick. This piece is one of the stairs that would have fitted between both banisters and still slots in to one of the grooves on the remaining banister. The join is step and groove radiused rather than square cut. Companion ladders or a companion way is usually steep but has treads or stairs rather than run…
Created on: Wednesday 23rd August 2017
Last updated: Tuesday 8th May 2018
Spatial data recorded.

Record ID: MAS-F100105
Object type: STRUCTURAL TIMBER
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
These two unidentified timbers measure 790 x 75 x 90 mm and 160 x 100 x 60 mm and were recovered from a boat's trawl nets whilst working out of Newhaven, East Sussex. The small piece shows evidence of a longer period of immersion in terms of abrasion and marine borer damage, though this may also be due to the relative hardness and variety of the two woods, or any treatment that might have been received to protect the timber. Neither timber appears to be of ship related origin, with the larger darker piece looking as if it might have been a post and rail fence board originally, rather t…
Created on: Wednesday 23rd August 2017
Last updated: Tuesday 22nd May 2018
Spatial data recorded.

Record ID: MAS-D100085
Object type: CLAY PIPE (SMOKING)
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
A selection of seven clay pipes. Two of the pipes are of 'Irish' type (Atkinson and Oswald 1969, type 31, dated post-1840), with spurs and milled bowl rims, and the remaining five are of a spur-less form copying the briar pipe (ibid., type 30, dated c. 1850-1910). All of the clay pipes are 'cutty' (short) pipes. The spur-less examples are all stamped with the mark 'H B W Russell Co.'. This appears to be the mark of an agent or retailer rather than the pipe manufacturer (as is more usual). H. B. W. Russell may have a connection with Liverpool - pipes stamped 'HBW Russell of Liverpool' …
Created on: Friday 11th August 2017
Last updated: Thursday 7th December 2017
Spatial data recorded.

Record ID: MAS-D100087
Object type: DOMED LID
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One ceramic serving dish lid made of a refined whiteware with transfer-printed design in red.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c. 1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate).
Created on: Friday 11th August 2017
Last updated: Wednesday 6th December 2017
Spatial data recorded.

Record ID: MAS-D100084
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Three cylindrical glass bottles. The two larger bottles are full size wine bottles. One is of the 'Burgundy' type and is most likely Continental. The half-size wine bottle, originally thought to be a champagne bottle, also has a Continental style neck. The Continental style neck appears around the middle of the 19th century (Dumbrell 1983). All are of nineteenth or twentieth century type.
Created on: Friday 11th August 2017
Last updated: Wednesday 6th December 2017
Spatial data recorded.

Record ID: MAS-D100101
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two case gin bottles. Some of the earliest liquor bottles were square in cross section and generally designed to contain gin though undoubtedly contained various types of liquor and possibly wine. Commonly called 'case gin' or 'taper gin' bottles since they would pack more efficiently in a case (6 to 24 bottles) than round bottles. Case gin bottles are square with a distinct taper inwards from the shoulder to the base. The neck is very short to almost non-existent with the finishes varying from a laid-on ring, flared, mineral finish, oil, and even a blob. This shape and style of bottl…
Created on: Friday 11th August 2017
Last updated: Tuesday 22nd May 2018
Spatial data recorded.

Record ID: MAS-D100082
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
A collection of four stoneware ginger beer bottles covered with a feldpathic glaze and stamped with 'A Phillips Victoria VI'. These bottles relate to Alexander Phillips of Vancouver Island, British Columbia, whose business ran from 1858. In 1879, his son became a partner in the business after which time the bottles are stamped 'A Phillips & Son' (B.C. & Vancouver Island - Bottles, Antiques & Collectibles, accessed November 2017). These stoneware ginger beer bottles were produced in Britain by the Doulton Lambeth Company. 'VI' stood for the crown colony of Vancouver Island. …
Created on: Friday 11th August 2017
Last updated: Wednesday 6th December 2017
Spatial data recorded.

Record ID: MAS-D100100
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
A collection of five bottles comprising two full-size glass bottles, one squat cylindrical glass bottle, one small clear bottle, and one stoneware bottle. All the bottles are believed to be of nineteenth and twentieth century type, although it is difficult to date all but the stoneware bottle. The two full-size glass bottles are thought to be either wine or beer bottles. If the bottles have kicked bases, it would indicate a wine bottle, while a flat base would indicate a beer bottle. The squat cylindrical glass bottle was thought to be a port bottle, however if the base is flat, thi…
Created on: Friday 11th August 2017
Last updated: Tuesday 22nd May 2018
Spatial data recorded.

Record ID: MAS-D100071
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Three aqua coloured glass bottles with tooled lips; for foodstuffs or other household goods; probably dating to the 19th century. These bottles have a double ring also known as a double collar, double bead, double lip, Davis-type, stacked ring, bead lip with a ring, round band lower flared, broad round collar with lower bevel, inverted double ring, citrate of magnesia finish, double roll collar and stacked ring. This two-part finish is composed of two connected 'rings' - usually with a thicker and slightly wider variably rounded ring at the top of the finish with a thinner and narrowe…
Created on: Monday 24th July 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-D100068
Object type: WINE BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two green glass wine bottles that appear to have the flat band-like collar around the rim which is typical of Continental (particularly French) wine bottles; the type appeared around the middle of the 19th century. This particular shape was - and still is - referred to as a 'hock' or Rhine wine and was one of the three dominant styles of wine bottles that bridge the time from at least the mid-19th century to the present day. Hock wine bottles are of German or French origin and during the 19th century, typically contained both red and white Rhine and Mosel wines. The distinctive shape…
Created on: Monday 24th July 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-D100065
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Six stoneware seltzer bottles, of a type used to carry mineral water from various Continental (mainly German) spas. The term 'seltzer' takes its name from the town of Selters in the lower Rhineland, one of the original producers of effervescent mineral waters. This cylindrical bottle type was used from the early 19th century through to the First World War. These types of bottles were produced by the specialist potters known as Krugbacker, or pot bakers, in the Westerwald region of Germany. These bottles, which changed little throughout the 19th century, were slender and cylindrical and…
Created on: Monday 24th July 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-D100066
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Four stoneware bottles (three large and one smaller) that were probably used for beer, ale, stout or porter. Stoneware bottles provided the ultimate in protection from the detrimental effects of light but were very heavy. They were produced in Britain in the 1800s and many bottles found in the United States were even imported from here. All of these bottles have a feldspathic glaze over an ochre dip on the upper parts of the bottle giving them a darker colour on top. Feldspars (natural rocks of aluminosilicates) are used in stoneware and porcelain glazes because they fuse only at hi…
Created on: Monday 24th July 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-D100072
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One Hamilton bottle also known as a torpedo or egg bottle. These bottles are named after their English inventor, William Francis Hamilton who took out a patent in 1809 for a method of bottling soda and other mineral waters, involving ovate bottles (although use of ovate bottle probably pre-dated his patent by at least 20 years). These bottles became common in the 1840s when the manufacturing of mineral water became very popular. Before this date, carbonated water was only sold on a small scale. The bottle was invented as a way of keeping the gas in fizzy drinks. The pointed base meant …
Created on: Monday 24th July 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-D100074
Object type: INK BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
A collection of four ink bottles; one large and three small. The larger stoneware ink bottle displays a pourer on the rim and is glazed with a feldspathic glaze. This type of ink bottle was introduced in the 1860s and were superseded by glass bottles by the first decade of the 20th century. Cylindrical stoneware ink bottles were made in England in large quantities throughout the Victorian era. The bottles varied widely in size and were not all brown. The larger or master bottles with a pouring lip brown bottles were commonly used for ink. The pouring spout would be used to distribute …
Created on: Monday 24th July 2017
Last updated: Tuesday 21st November 2017
Spatial data recorded.

Record ID: MAS-D100078
Object type: EGG CUP
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One egg cup made of a refined whiteware.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is not until the Victorian era that eggcups were mass marketed and regularly offered with dinnerware services. Companies, like Wedgwood and Haviland, produced eggcups and decorate…
Created on: Monday 24th July 2017
Last updated: Tuesday 29th January 2019
Spatial data recorded.

Record ID: MAS-D100076
Object type: ROUNDED BOWL
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Six small convex bowls that may have also functioned as cups or tea bowls. All the bowls are made of a refined whiteware and three of them display a hand painted decoration.The term 'whiteware' is used in historical archaeology to denote refined ceramics with a whiter and denser body than pearlware that generally postdates c.1830. Whiteware is a class of ceramic products that include porcelain and china. They are usually, but not necessarily, white and consist typically of clays, feldspar, potter's flint, and whiting (calcium carbonate). It is thought that these examples may be tea war…
Created on: Monday 24th July 2017
Last updated: Thursday 5th October 2017
Spatial data recorded.

Record ID: MAS-D100063
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Five olive green case gin bottles with a square tapered body and four dots on base. Some of the earliest spirit bottles were square in cross section and generally designed to contain gin, though undoubtedly contained various types of alcohol and possibly wine. Commonly called "case gin" or "taper gin" bottles since they would pack more efficiently to a case (six to 24 bottles) than round bottles. Case gin bottles are square with a more or less distinct taper inwards from the shoulder to the base. The neck is very short to almost non-existent with the finishes varying from a laid-on ri…
Created on: Saturday 15th July 2017
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-D100079
Object type: CLAY PIPE (SMOKING)
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
All three pipes here are complete and are of the short or 'cutty' form. Two of the pipes measure 100 mm and have bowls in the form of a male head, wearing a thin-brimmed cap, while the third, which measures 120 mm, has a simple impression pattern around the outside of the rim. The male head on two of the pipes has previously been thought to represent a military figure or the head of a French soldier. They fall into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, that were common in the late 19th and early 20th centuries. Such decora…
Created on: Saturday 15th July 2017
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-D100080
Object type: PERFUME BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two clear glass perfume bottles. One has a square tapered body and measures 85 mm by 35 mm while the other measures 95 mm by 40 mm and has a round body complete with a round stopper and still contains yellow liquid. Perfume bottles were part of the vessel's cargo and many other bottles have been salvaged from the wreck by divers during recent years. Their form would be entirely consistent with a date around the turn of the 19th/20th century.
Created on: Saturday 15th July 2017
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-D100054
Object type: JUG
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Four milk jugs with a Chinese style design and a light grey coloured pattern and appear to be made of porcelain (although this has not been confirmed). Similar in decorative style to the bowls recorded as MAS-D100047, it is assumed that the these milk jugs were made by either Charles Meigh of Hanley, Staffordshire (1835-49), the preceding company, J. Meigh and Son (c.1805-34), or the succeeding company, Charles Meigh and Son (1851-61) (Godden 1964, 428-429).
Created on: Sunday 4th June 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100047
Object type: BOWL
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Seven Chinese style bowls most likely to be made of porcelain. There is a parallel for the base mark that looks as though it's imitating Chinese porcelain marks. This is the mark of Charles Meigh of Hanley, Staffordshire, operating between 1835-49, but it was also used by the preceding company, J. Meigh and Son (c.1805-34) and the succeeding company, Charles Meigh and Son (1851-61) (Godden 1964, 428-429). The CM mark in the '..CASTER' stamp suggests that it's Charles Meigh, which puts the date just before the wreck date.
Created on: Saturday 3rd June 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100046
Object type: JAR
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two stoneware jars with feldspathic glaze over yellow ochre dip on upper part of vessels. One carries the stamped mark of the manufacturer: 'Doulton & Watts' Lambeth Pottery'. The firm of Doulton and Watts was established in 1820 as Watts and Doulton, becoming Doulton and Watts by 1826 (Tyler et al. 2005, 12). This particular stamp was used until 1858, when John Watts died, after which the name Doulton appeared alone (Eyles and Irvine 2002, Appendix II), although the company name of Doulton and Watts was used in trade catalogues until at least 1873. Feldspathic glazes were introduc…
Created on: Saturday 3rd June 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100042
Object type: BOWL
Broad period: NINETEENTH CENTURY
County: Dorset
Workflow stage: Published
Fragment of white ceramic bowl or lid marked with black and white geometric design and number '23'. Number appears to be hand-painted or stamped. Found loose on the seabed with a little marine growth present. This is a naval issue bowl probably used for drinking rather than smaller, handled cups, as they were more practical on board a ship. The number refers to the mess number, and the bowls were designed to be stored upside-down. The find dates to the late 19th or 20th century.
Created on: Monday 29th May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-O100041
Object type: CANDLESTICK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One green glass candlestick measuring 5.5 inches high and 3.5 inches wide. This candlestick is thought to date to the 19th century.
Created on: Monday 29th May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-O100053
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
One gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine …
Created on: Monday 29th May 2017
Last updated: Monday 19th March 2018
Spatial data recorded.

Record ID: MAS-D100039
Object type: CANDLESTICK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Two mass produced glass candlesticks; one blue and one green that is badly damaged presumably having spent at least a century underwater. No further information is known about them at this time.
Created on: Monday 22nd May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100051
Object type: DRINKING VESSEL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
One ivy leaf patterned teacup marked with the Davenport logo. This transfer printed refined ware (either pearlware or whiteware) cup dates to the 19th century. John Davenport acquired his own pottery in 1794, initially producing cream coloured blue-printed earthernware. Within 12 years the company's reputation and the quality of its porcelain was such that the future King George IV was ordering services from the company. John Davenport retired in 1830 and the company was continued to be run by his sons and their children until 1887 when the factory closed and the company was acquired b…
Created on: Sunday 21st May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-100011
Object type: CLAY PIPE (SMOKING)
Broad period: NINETEENTH CENTURY
County: Cornwall
Workflow stage: Published
This is a very worn example of a 'cutty' (short) pipe (total length 115 mm) with a round-based spurless bowl imitating a briar pipe, and decorated with multiple 'thorns' - small pointed protrusions around the stem and bowl. This type of bowl was in use between c. 1850 and 1910 (Atkinson and Oswald 1969: type 30), and the thorn design was one of the many decorative types popular during this period (e.g. Ayto 1994:11; Hammond 2009: figure 7). Clay tobacco pipes were manufactured (using two-piece moulds) in huge quantities in many towns and cities around the UK and were also imported fro…
Created on: Wednesday 28th September 2016
Last updated: Wednesday 12th October 2016
Spatial data recorded.

Record ID: MAS-6105BA
Object type: FIREARM
Broad period: NINETEENTH CENTURY
County: Cornwall
Workflow stage: Published
This gun is a QF (quick firing) 6-pounder Hotchkiss, a light 2.25 inch (57 mm) naval and coastal defence gun from the late 19th century. The design appears to be pre-1890 as it does not have the recoil system that was introduced at that time. The original 1885 Mk I was a built-up gun with a vertical sliding-block breech. The name comes from the French manufacturing company, Hotchkiss, who were the major supplier of light QF guns in the world. This type of gun became a standard torpedo defence weapon; many navies bought this same type of gun (Friedman 2011).
Created on: Monday 25th July 2016
Last updated: Friday 26th August 2016
Spatial data recorded.