Record ID: MAS-100017
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Essex
Workflow stage: Published
This cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema. Providing a relative date for this cattle mandible is challenging without further e…
Created on: Tuesday 18th October 2016
Last updated: Monday 16th January 2017
Spatial data recorded.

Record ID: MAS-100009
Object type: SHOT
Broad period: POST MEDIEVAL
County: Essex
Workflow stage: Published
This is an assemblage of six round cast iron and stone projectiles of varying sizes. Due to the ubiquitous nature of their design, it is difficult to accurately date cannonballs with any certainty. This issue is compounded by the wide variation in designs and calibres of the cannons that fired them and the lifespan of the weapon, with obsolete designs often still in use on merchant ships long after they had fallen out of service with the various navies of Northern Europe, who also used captured weapons on their vessels. Cast iron cannonballs are thought to have appeared at some point d…
Created on: Wednesday 28th September 2016
Last updated: Thursday 13th April 2017
Spatial data recorded.

Record ID: MAS-100018
Object type: COSTREL
Broad period: POST MEDIEVAL
Workflow stage: Published
A salt-glazed stoneware barrel costrel, almost certainly German and probably dating to the 17th century. Recovered in 1966 during a dive at a depth of approximately 50-60 ft, and found in association with two lots of cannon, cannonballs and lead sheeting.
Created on: Friday 21st October 2016
Last updated: Wednesday 23rd May 2018
No spatial data available.

Record ID: MAS-D100036
Object type: SAUCER
Broad period: POST MEDIEVAL
Workflow stage: Published
Pewter bowl measuring 15 inches in diameter by 2 1/2 inches in depth. This find is a pewter dish or saucer (the term 'saucer' is used here to describe vessels used to contain sauces, in order to disguise or enhance the taste of food), probably dating somewhere between the 16th and 18th centuries - there are very similar examples, for instance, in 16th century contexts from Nonsuch Palace in Surrey (Rosemary Weinstein, 'Pewter vessels', in Biddle 2005). That doesn't mean that this vessel is a high-status object - saucers and dishes were among the most commonly made pewter items, and wo…
Created on: Tuesday 25th April 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100052
Object type: JUG
Broad period: POST MEDIEVAL
Workflow stage: Published
One badly damaged ceramic jug with marine encrustration. The vessel is probably stoneware, but possibly glazed redware as there appears to be the characteristic 'orange peel' texture of salt-glazed stoneware visible in the photo, with the 'reeding' that you get round the rims of stoneware vessels. If this is the case it is almost certainly German in origin. The rounded shape would place it somewhere in the second half of the 16th century or first half of the 17th century.
Created on: Tuesday 23rd May 2017
Last updated: Tuesday 3rd October 2017
No spatial data available.

Record ID: MAS-D100050
Object type: ARCHITECTURAL FRAGMENT
Broad period: POST MEDIEVAL
Workflow stage: Published
A rough cut square marble tile with pink colouration and marine growth visible. The tile measures approximately 0.3 m in length. It has not been possible to provide furter identification at this time.
Created on: Tuesday 14th March 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100134
Object type: HANDLE
Broad period: POST MEDIEVAL
Workflow stage: Published
The stem of a silver fork or spoon with a hallmark pattern. The set of four hallmarks located together on the piece of cutlery indicates it was made later than 1781, when this practice was first introduced. Based on this image, this type of spoon/fork is possibly a Fiddle pattern - this refers to the shape of the handle - and is a type introduced in the 1780s and still in production today. The Fiddle pattern means that there are shoulders on the stem near the bowl, which is seen on this example. The lower end of the stem juts out around 90 degrees but this example may have been worn d…
Created on: Monday 23rd October 2017
Last updated: Monday 30th March 2020
No spatial data available.

Record ID: MAS-O100169
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Published
Double edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long. Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and o…
Created on: Saturday 20th January 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100178
Object type: TOOTHBRUSH
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secu…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100177
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Section of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships …
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-O100189
Object type: NAIL
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Published
The find consists of 8 iron nails and an unidentifiable object that contains one further nail and is made of, or covered in, what appears to be fur. The nails range in length from 135 - 175 mm, and c. 10 - 20 mm in width at their widest point below the head. All 8 nails have a rose type head and taper to a broad point. These features suggest that the nails were hand wrought, rather than cut or wire, a method where each nail is manufactured individually by hand on a blacksmiths anvil. The invention of the slitting mill c. 1590 simplified this process by manufacturing iron rods from whi…
Created on: Wednesday 13th June 2018
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-D100190
Object type: CONTAINERS
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Published
This find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and t…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-O100234
Object type: BARREL
Broad period: POST MEDIEVAL
County: Down
Workflow stage: Published
This find comprises of the remains of three to four wooden barrels, which were buried in the intertidal sandy substrate of a pleasure beach. The action of the tide revealed the barrels and it is unclear how much of the barrels remain. End of the staves, lengths of timber making the sides of the barrel, are visible and clearly degraded. In some cases these give the appearance of flaring outwards, implying that only the lower portion of the barrel remains. At least one barrel exhibits inwardly projecting staves, suggesting more than half of the barrel remains. There is some evidence for …
Created on: Monday 15th October 2018
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-O100099
Object type: HANDAXE
Broad period: PALAEOLITHIC
County: Hampshire
Workflow stage: Published
Heavily sea-rolled and worn worked flint tool, covered in chalk patination (see third image). The flint measures 80 mm long, 60 mm wide and 30 mm thick, and unfortunately about 20% of the working end has recently broken off. Due to wear and damage on this hand-worked tool it has been difficult to confidently identify. Bryan Popple of Bournemouth Natural Science Society and Museum believes it could possibly be Homo neanderthalensis dating to around 200,000 years bp (before present). The smaller size indicates typical Neanderthal workings in comparison to the larger and older Homo heidel…
Created on: Saturday 5th August 2017
Last updated: Wednesday 23rd May 2018
Spatial data recorded.

Record ID: MAS-D100128
Object type: HINGE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This record refers to the metal hinge and attached timber shown in the top left corner of image one, the other finds are dealt with under separate records. The object is approximately 305 mm in overall length and 204 mm in overall width. For the hinge element of the object only one leaf can be observed from the photo, which measures approximately 64 mm by 127 mm. Given the leaves are likely to be identical in size, this would suggest the overall width is approximately 127 mm making a regular square when fully opened. The metal of the hinge is in generally good condition, with some blu…
Created on: Monday 9th October 2017
Last updated: Wednesday 22nd April 2020
No spatial data available.

Record ID: MAS-D100173
Object type: CLOCK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks. Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 9th April 2020
Spatial data recorded.

Record ID: MAS-D100174
Object type: CUTLERY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100199
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This find is a small medicine style bottle in green glass. No scale was provided but these vessels are usually 160 - 190 mm in overall height. The vessel is flat bottomed with a rectangular shape in plan, with the short sides being rounded. it has a short but wide neck ending in a bead type finish, common to medicine bottles. Embossed on the shoulders of the vessel is the word KEPLER, which refers to the product which it contained. The base is embossed with SNOW HILL, B. W. & Co, LONDON, which refers to the manufacturer and their factory in London. The condition of the vessel is go…
Created on: Wednesday 4th July 2018
Last updated: Wednesday 19th February 2020
No spatial data available.

Record ID: MAS-D100230
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Three bottles of blown glass. The frst two bottles are torpedo or Hamilton´s type bottle (Hamilton introduced this type of blow molding) from the mid-nineteenth century dedicated to containing carbonated water or 'soda'. Both are light blue/green 'aqua' glass and measure 250 mm long and have a diameter of 75 mm with a 'bottom-weighted' blob finish. The inscription "Aerated Water" "Bombay" makes reference to the content and place of distribution, something that manufacturers of this type of packaging commonly did. The design ensured that the bottles would be stored on their side, keepi…
Created on: Tuesday 2nd October 2018
Last updated: Wednesday 1st April 2020
Spatial data recorded.

Record ID: MAS-D100228
Object type: VALVE
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This copper alloy valve has a spherical central body with three sperate connections. One of the connections has a 25 mm long male thread evident, whilst the remaining two are concealed by concretion. One of the connections is probably a female thread entry and the third of the connections an elbow pipe union. The diameter of the connections is approximately 30 mm. Overall dimensions are approximately 100 mm by 100 mm. The exact purpose of such a valve is not immediately apparent, though it likely relates to the vessels' operation and machinery rather than any cargo. As a coal powered …
Created on: Tuesday 25th September 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.