Record ID: MAS-D100207
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Long necked glass bottle in clear or aqua marine glass. Overall height of 210 mm from base to finish, the height of body from base to shoulder being 120 mm. The finish being of the applied style, bearing a ring of glass approximately 15 mm wide over a further ring extending a further 5-10 mm down the neck. The base of the vessels exhibits a slightly concave punt <10 mm deep. In profile the body appears to be of a flattened hexagon shape, approximately 70 mm wide. the largest pane of the hexagonal shape being 45 mm across. The contraction from body to neck is severe, narrowing to 30 …
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100205
Object type: TOBACCO PIPE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Complete example of a clay tobacco pipe of the bent billiard style, probably dating to the 19th century. Overall length of 80 mm, with the stem being 50 mm in length. The "short stem" is circular in profile at the heel, changing to a hexaganol profile 20 mm from the mouth piece, which bears beading around the aperture. The left hand side of the stem, from the users perspective, bears a cartouche comprising an embossed diamond lozenge in turn enclosing an incised inscription of SQUATTERS OWN. The opposite side of the stem bears an identical lozenge enclosing the incised word SYDNEY. The…
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100197
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Six glass gin bottles. 'Case gin' or 'taper gin' bottles have a square cross section that means that packing became more effective than with round bottles. The bodies taper wider towards a sharp shoulder, short neck and a champagne finish. The bottles are olive green in colour, and are in a fair condition despite encrusting towards the neck. This shape and style of bottle originated in and was commonly made in Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later and may therefore be earlier …
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100190
Object type: CONTAINERS
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Published
This find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and t…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100181
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Find consists of two sections of timber or wood. The first measures approximately 1650 mm in length, 85 mm in width and 90 mm in depth. There are no diagnostic elements visible upon the timber, such as tool marks or fixing points, and therefore its function remains unknown. It does, however, appear to be faced and is therefore unlikely to be a piece of natural driftwood. The second piece of wood measures approximately 196 mm in length and 20 mm in width. There is at least one possible nail hole visible and again it appears to have been faced or worked by human hands. It is heavily deg…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100180
Object type: CANNON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This item appears to be a small calibre black powder weapon, such as a swivel gun, commonly mounted on vessels throughout the age of sail as well as being used in terrestrial settings. The weapon is approximately 750 mm in overall length, with external muzzle diameter of approximately 110 mm flaring to an external diameter of 180 mm at the breech end. The condition of the artefact is poor due to heave concretion, though visual analysis suggests it is a muzzle loading gun. No Trunnions for mounting the weapon are immediately apparent despite the concretion. As their name suggests, swiv…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100184
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
A single piece of copper alloy sheeting, measuring approximately 70 mm by 55 mm with a thickness of c. 2 mm. The item bears 4 grooves pressed into the metal along the long axis on one face, only one of which is evident on the opposite face. The item appears to be distorted from its original shape, all the edges appear intact suggesting it is otherwise complete. The function of such an item is unclear, though it was recovered in close proximity to a swivel gun (MAS-D100180) and may relate to the functioning of such a weapon in some way.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100183
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Find comprises of a single length of copper or copper alloy wire, measuring approximately 140 mm long and 10 mm in thickness. The wire consists of a central core of copper alloy strands, which are then wrapped or sheathed in a strand of copper alloy tightly wound around the core. The wire appears to taper towards one end, though it is not clear if this part of its manufacture or damage occurring to it during its use or post deposition on the seabed. The function of this item, clearly incomplete as evidenced by its severed ends, is unclear. Its finding was recorded as being in close pro…
Created on: Friday 1st June 2018
Last updated: Friday 27th March 2020
Spatial data recorded.

Record ID: MAS-O100179
Object type: ORDNANCE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of 12 lead balls varying in diameter between c. 15 mm and 21mm. All appear unfired and bear the mould lines and sprue marks from being hand moulded in a 2 part mould. The balls themselves are in fair condition, though some bear concretion/encrustation. Images of the finds were sent to Charles Trollop, an expert in historical ordnance, who advised that in all likelihood these are English Standard Musket (0.775 " or 19.79 mm) and Carbine (0.615 " or 15.64 mm) Balls. These standards relate to most of the black powder/smooth bore period from the 17th to 19th centuries.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100178
Object type: TOOTHBRUSH
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secu…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100177
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Section of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships …
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100133
Object type: BOTTLES
Broad period: POST MEDIEVAL
Workflow stage: Published
Two clear glass fruit bottles, one ornate green glass wine bottle, one tall brown wine bottle with glass hexagonal base (94 stamped on base) and one black glass bottle. The fruit bottles are 280 mm long and 70 mm wide. One appears to be more encrusted and discoloured than the other, but both are consistent in their shape. They possess straight bodies, abrubtly curving shoulders and straight necks running to applied finishes. One is still stoppered and contains what appears to be olives. Both are indicative of fruit bottles in style and shape. The two wine bottles differ in appearance…
Created on: Monday 23rd October 2017
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-D100134
Object type: HANDLE
Broad period: POST MEDIEVAL
Workflow stage: Published
The stem of a silver fork or spoon with a hallmark pattern. The set of four hallmarks located together on the piece of cutlery indicates it was made later than 1781, when this practice was first introduced. Based on this image, this type of spoon/fork is possibly a Fiddle pattern - this refers to the shape of the handle - and is a type introduced in the 1780s and still in production today. The Fiddle pattern means that there are shoulders on the stem near the bowl, which is seen on this example. The lower end of the stem juts out around 90 degrees but this example may have been worn d…
Created on: Monday 23rd October 2017
Last updated: Monday 30th March 2020
No spatial data available.

Record ID: MAS-D100129
Object type: BOTTLES
Broad period: POST MEDIEVAL
Workflow stage: Published
Two bottles with dark glass. Both appear to be 250 mm from finish to base and 50 mm in diameter. One bottle is dark green and the other black. Both have been encrusted and marked with biological activity, which could be mistaken for ornate symbols and badges. Neither are corked or stoppered. Both are very similar in style with straight bodies, rounded and slightly abrupt shoulders that lead into slightly bulging necks before an applied wine finish. From this shape and size, both bottles are assumed to be wine bottles, or perhaps liquor bottles from the 19-20th century. The finish of …
Created on: Monday 9th October 2017
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-O100124
Object type: BRASS
Broad period: POST MEDIEVAL
Workflow stage: Published
One ornate brass piece. The piece has an aperture in the middle, in the centre of a circular disc which is itself recessed slightly into the surface. The disc extends laterally into two leaf-shaped limbs, which are decoratively styled and form curved arrows at their tips. At the end of each limb there is a circular hole, which was likely used to fasten the brass piece to its host object. These holes are countersunk, presumably to accommodate the heads of screws. The piece is approximately 90 mm in length, with a width of 40 mm and thickness of 2 mm. The diameter of the two larger holes…
Created on: Monday 11th September 2017
Last updated: Friday 27th March 2020
Spatial data recorded.

Record ID: MAS-D100045
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Base of a broken glass onion bottle found loose on the seabed with quite a lot of marine growth present, including over the broken edges. Found on Marl Beds - not long after passing over an area of numerous fairly amorphous concretions apparently loose on the coarse sandy seabed.
Created on: Tuesday 30th May 2017
Last updated: Friday 28th February 2020
Spatial data recorded.

Record ID: MAS-O100053
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
One gin bottle measuring 11 inches high by 3 1/2 inches wide. This square, mould-blown 'case bottle', has the typical tapering profile. The square shape enabled the bottles to be packed more efficiently in a case than round bottles, and the tapering profile stops them from sticking when removed from the case. They were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine …
Created on: Monday 29th May 2017
Last updated: Monday 19th March 2018
Spatial data recorded.

Record ID: MAS-D100040
Object type: BOTTLE
Broad period: POST MEDIEVAL
Workflow stage: Published
One onion bottle dated to c.1700. Glass onion bottles were large hand-blown glass bottles, used aboard sailing ships to hold wine or brandy. For increased stability on rough seas, the bottles were fashioned with a wide-bottom shape to prevent toppling. Between c.1690 and c.1720 the outline of a wine bottle resembled an onion - a wide compressed globular body and a short neck (Robinson and Harding 2015). Most bottles before 1700 had a ring of glass just below the neck that gave anchorage to the string used to hold in variety of stoppers. The Dutch bottles usually had a longer neck than…
Created on: Tuesday 23rd May 2017
Last updated: Wednesday 4th October 2017
No spatial data available.

Record ID: MAS-D100052
Object type: JUG
Broad period: POST MEDIEVAL
Workflow stage: Published
One badly damaged ceramic jug with marine encrustration. The vessel is probably stoneware, but possibly glazed redware as there appears to be the characteristic 'orange peel' texture of salt-glazed stoneware visible in the photo, with the 'reeding' that you get round the rims of stoneware vessels. If this is the case it is almost certainly German in origin. The rounded shape would place it somewhere in the second half of the 16th century or first half of the 17th century.
Created on: Tuesday 23rd May 2017
Last updated: Tuesday 3rd October 2017
No spatial data available.

Record ID: MAS-D100038
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Four glass bottles that are all square, mould-blown 'case bottles', with a typical tapering profile. The square shape enabled them to be packed more efficiently in a case than round bottles, and the tapering profile stopped them from sticking when removed from the case. These were used for gin (although undoubtedly also sometimes for other spirits or wine). Square case bottles were made in Europe from the middle of the 17th century, but the tapering form seems to have become more common in the 19th century. From the 1880s the bottles were machine made, and the rims properly finished - …
Created on: Sunday 21st May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100051
Object type: DRINKING VESSEL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
One ivy leaf patterned teacup marked with the Davenport logo. This transfer printed refined ware (either pearlware or whiteware) cup dates to the 19th century. John Davenport acquired his own pottery in 1794, initially producing cream coloured blue-printed earthernware. Within 12 years the company's reputation and the quality of its porcelain was such that the future King George IV was ordering services from the company. John Davenport retired in 1830 and the company was continued to be run by his sons and their children until 1887 when the factory closed and the company was acquired b…
Created on: Sunday 21st May 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.

Record ID: MAS-D100036
Object type: SAUCER
Broad period: POST MEDIEVAL
Workflow stage: Published
Pewter bowl measuring 15 inches in diameter by 2 1/2 inches in depth. This find is a pewter dish or saucer (the term 'saucer' is used here to describe vessels used to contain sauces, in order to disguise or enhance the taste of food), probably dating somewhere between the 16th and 18th centuries - there are very similar examples, for instance, in 16th century contexts from Nonsuch Palace in Surrey (Rosemary Weinstein, 'Pewter vessels', in Biddle 2005). That doesn't mean that this vessel is a high-status object - saucers and dishes were among the most commonly made pewter items, and wo…
Created on: Tuesday 25th April 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100032
Object type: WATER CRAFT EQUIPMENT
Broad period: POST MEDIEVAL
Workflow stage: Published
A wooden belaying pin, approximately 0.4 m in length. Belaying pins are either solid metal or wooden objects used on sailing ships to secure the running rigging. They are still seen today on traditional square rigged ships and replica vessels. More modern sailing vessels have tended to replace them with fixed cleats. Their design has little changed, comprising a rounded handle and cylindrical shaft of varying length and thickness, dependant on the workload placed on it. The shaft would fit into holes in pinrails, which lined the inside of the bulwarks around the base of the ship's mas…
Created on: Tuesday 14th March 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100049
Object type: WATER CRAFT EQUIPMENT
Broad period: POST MEDIEVAL
Workflow stage: Published
Two circular wooden pulley sheaves. It is not clear whether these wooden pulley sheaves were a pair or from single sheave pulleys. Generally made from ash (Fraxinus), hickory (Carya) in the case of North America, or Lignum vitae. Lignum vitae, Latin for 'wood of life', is a trade wood, also called Guayacan or Guaiacum from the trees of the genus Guaiacum. The trees are indigenous to the Caribbean and the northern coast of South America and have been an important export crop to Europe since the beginning of the 16th century due to its extraordinary combination of strength, toughness, an…
Created on: Tuesday 14th March 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100050
Object type: ARCHITECTURAL FRAGMENT
Broad period: POST MEDIEVAL
Workflow stage: Published
A rough cut square marble tile with pink colouration and marine growth visible. The tile measures approximately 0.3 m in length. It has not been possible to provide furter identification at this time.
Created on: Tuesday 14th March 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-100018
Object type: COSTREL
Broad period: POST MEDIEVAL
Workflow stage: Published
A salt-glazed stoneware barrel costrel, almost certainly German and probably dating to the 17th century. Recovered in 1966 during a dive at a depth of approximately 50-60 ft, and found in association with two lots of cannon, cannonballs and lead sheeting.
Created on: Friday 21st October 2016
Last updated: Wednesday 23rd May 2018
No spatial data available.

Record ID: MAS-1F5444
Object type: BEAD
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Twenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing th…
Created on: Wednesday 3rd August 2016
Last updated: Friday 30th September 2016
Spatial data recorded.

Record ID: MAS-100004
Object type: CLAY PIPE (SMOKING)
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
All three white pipes here are complete, and are of the short or 'cutty' form. Two carry relief moulded decoration featuring Masonic emblems (incorporating the crossed compass and square), while the third is in the form of a male head, wearing a thin-brimmed cap, possibly a military figure. Pipes with Masonic emblems were made from the mid-18th century in the UK, but remained popular into the early 20th century, while the male head falls into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, common in the late 19th and early 20th cent…
Created on: Thursday 28th July 2016
Last updated: Tuesday 29th January 2019
Spatial data recorded.