Record ID: MAS-D100177
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Section of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships …
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100178
Object type: TOOTHBRUSH
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secu…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-O100179
Object type: ORDNANCE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of 12 lead balls varying in diameter between c. 15 mm and 21mm. All appear unfired and bear the mould lines and sprue marks from being hand moulded in a 2 part mould. The balls themselves are in fair condition, though some bear concretion/encrustation. Images of the finds were sent to Charles Trollop, an expert in historical ordnance, who advised that in all likelihood these are English Standard Musket (0.775 " or 19.79 mm) and Carbine (0.615 " or 15.64 mm) Balls. These standards relate to most of the black powder/smooth bore period from the 17th to 19th centuries.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100183
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Find comprises of a single length of copper or copper alloy wire, measuring approximately 140 mm long and 10 mm in thickness. The wire consists of a central core of copper alloy strands, which are then wrapped or sheathed in a strand of copper alloy tightly wound around the core. The wire appears to taper towards one end, though it is not clear if this part of its manufacture or damage occurring to it during its use or post deposition on the seabed. The function of this item, clearly incomplete as evidenced by its severed ends, is unclear. Its finding was recorded as being in close pro…
Created on: Friday 1st June 2018
Last updated: Friday 27th March 2020
Spatial data recorded.

Record ID: MAS-D100184
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
A single piece of copper alloy sheeting, measuring approximately 70 mm by 55 mm with a thickness of c. 2 mm. The item bears 4 grooves pressed into the metal along the long axis on one face, only one of which is evident on the opposite face. The item appears to be distorted from its original shape, all the edges appear intact suggesting it is otherwise complete. The function of such an item is unclear, though it was recovered in close proximity to a swivel gun (MAS-D100180) and may relate to the functioning of such a weapon in some way.
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100180
Object type: CANNON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This item appears to be a small calibre black powder weapon, such as a swivel gun, commonly mounted on vessels throughout the age of sail as well as being used in terrestrial settings. The weapon is approximately 750 mm in overall length, with external muzzle diameter of approximately 110 mm flaring to an external diameter of 180 mm at the breech end. The condition of the artefact is poor due to heave concretion, though visual analysis suggests it is a muzzle loading gun. No Trunnions for mounting the weapon are immediately apparent despite the concretion. As their name suggests, swiv…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100181
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Find consists of two sections of timber or wood. The first measures approximately 1650 mm in length, 85 mm in width and 90 mm in depth. There are no diagnostic elements visible upon the timber, such as tool marks or fixing points, and therefore its function remains unknown. It does, however, appear to be faced and is therefore unlikely to be a piece of natural driftwood. The second piece of wood measures approximately 196 mm in length and 20 mm in width. There is at least one possible nail hole visible and again it appears to have been faced or worked by human hands. It is heavily deg…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-O100189
Object type: NAIL
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Published
The find consists of 8 iron nails and an unidentifiable object that contains one further nail and is made of, or covered in, what appears to be fur. The nails range in length from 135 - 175 mm, and c. 10 - 20 mm in width at their widest point below the head. All 8 nails have a rose type head and taper to a broad point. These features suggest that the nails were hand wrought, rather than cut or wire, a method where each nail is manufactured individually by hand on a blacksmiths anvil. The invention of the slitting mill c. 1590 simplified this process by manufacturing iron rods from whi…
Created on: Wednesday 13th June 2018
Last updated: Monday 30th March 2020
Spatial data recorded.

Record ID: MAS-D100190
Object type: CONTAINERS
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Published
This find is a figurine measuring 145 mm in length with a diameter of 65mm. It depicts a man wearing a three cornered hat with holes in its top. In consultation with Wessex Archaeology finds specialist, Lorraine Mepham, this item has been identified as a 19th century Toby jug pepper pot figure, probably dating to around 1840 - 1860. For some unknown reason the figurine has lost most of its colour, as it's more usual to see these figures with different coloured clothing to go with the blue jacket. Research has found that these are commonly known as "Staffordshire" Toby pepper pots and t…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100191
Object type: COIN
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find comprises of a single gold coin from the USA with a value of $10. This 1847 minted coin was created for standard circulation and measures 27 mm in diameter with a weight of 16.72 grammes, the coin is minted in an alloy of 90% gold and 10% copper. It is of a type known as a Coronet Head - Eagle, based on the depictions on each face. The head side shows a side profile of lady liberty wearing a coront inscribed with the word "LIBERTY", the obverse bearing a spread eagle with a crest upon it and the words "UNITED STATES OF AMERICA TEN D." inscribed around the circumference of the…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100192
Object type: PERSONAL ACCESSORY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One gold T piece to believe part of a watch chain. These pieces were used to fasten the watch chain to an item of clothing, most often a wasitcoat. The T piece has a rounded embossing in the centre of the strip, with a small ring attached at this point for attaching the piece to a chain. The right end of the piece has a single ringed pattern shortly before terminating in a straight clean end. The left side of the piece has steps from the thicker piece to a thinner section extruding out a short distance. Given the date of sinking of the vessel from which it was recovered this item can r…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100193
Object type: ENGINE
Broad period: NINETEENTH CENTURY
County: East Sussex
Workflow stage: Published
Unidentified non-ferrous object that probably represents part of a ships engine or fixtures and fittings. It appears constructed from a copper alloy, measuring approximately 114 mm by 102 mm, being 52 mm in thickness. The open face of the item exhibits a circular central lug or axle measuring c. 38 mm in diameter, which extends c. 25 mm from the solid rear face. The open face bears a circular aperture, comprising approximately 270 degrees, which flairs out towards the outer edges of the object meeting the top left hand corner on the left side and meeting the edge on the right hand side…
Created on: Thursday 21st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100194
Object type: BOWL
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
One complete round bowl with a diameter of 241.3 mm and one part of a broken plate, both displaying the markers mark. Both pieces of ceramics have dark coloured decorative bands running around the outside and inside rim and have fractal cracks present. The white ceramic also has brown blemishes in places, but overall is in fair condition. The symbol crest in the centre of the bowl is a shield with "H.A.P. A.G" inscribed, overlying an anchor. "H.A.P. A.G" refers to The Hamburg Amerikanische Packetfahrt Aktien Gesellschaft; a German shipping company that operated from 1847 until 1970. It…
Created on: Saturday 23rd June 2018
Last updated: Wednesday 19th February 2020
Spatial data recorded.

Record ID: MAS-D100196
Object type: CLAY PIPE (SMOKING)
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Five small smoking pipes that are complete, four small smoking pipes that are broken, one large smoking pipe that is complete, six large smoking pipe that are broken. The pipes are mainly derived from two different styles: the long-stemmed style and the short-stemmed. The longer-stemmed bears no decoration or cartouche, along with absence of heel. The bowl is large, owing perhaps to the fall in tobacco prices in the 19th century and would have most likely been a cheap item. The shorter-stemmed pipes display ornate decoration on the bowl, in the form of a hatted head, and are made from…
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100197
Object type: BOTTLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Six glass gin bottles. 'Case gin' or 'taper gin' bottles have a square cross section that means that packing became more effective than with round bottles. The bodies taper wider towards a sharp shoulder, short neck and a champagne finish. The bottles are olive green in colour, and are in a fair condition despite encrusting towards the neck. This shape and style of bottle originated in and was commonly made in Europe at least as early as the mid-17th century. These examples do not exhibit the bevelled corners generally seen on bottles of the 1860s or later and may therefore be earlier …
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100198
Object type: CUP
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
Find consists of a fragment of a porcelain cup, representing about 1/4 - 1/3 of the total vessel including a complete base bearing a backstamp of BRYONIA U & C. Though only partially surviving, what remains is in fair condition with evidence of slight encrustation around the base. No scale was provided, however, other examples of this pattern and manufacturer have a diameter of c. 75 mm. The U & C inscription refers to Utzschneider & Co, a company based originally in Sarreguemines, North East France. This region was previously part of Alsace-Lorraine and therefore the manuf…
Created on: Wednesday 4th July 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100199
Object type: BOTTLE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This find is a small medicine style bottle in green glass. No scale was provided but these vessels are usually 160 - 190 mm in overall height. The vessel is flat bottomed with a rectangular shape in plan, with the short sides being rounded. it has a short but wide neck ending in a bead type finish, common to medicine bottles. Embossed on the shoulders of the vessel is the word KEPLER, which refers to the product which it contained. The base is embossed with SNOW HILL, B. W. & Co, LONDON, which refers to the manufacturer and their factory in London. The condition of the vessel is go…
Created on: Wednesday 4th July 2018
Last updated: Wednesday 19th February 2020
No spatial data available.

Record ID: MAS-O100203
Object type: HANDAXE
Broad period: PALAEOLITHIC
County: City of Portsmouth
Workflow stage: Published
Images of this find were sent to Andrew Shaw, flint specialist at Wessex Archaeology who determined that this object is an ovate biface handaxe that is in mint condition. This example is approximately 50-60 mm in width and 80-100 mm in long-axis. He said that the form of the butt and lateral margins are reminiscent of late Middle Palaeolithic handaxes, and it's possible that deposits of that age may be found in the intertidal and offshore zone in. Based on the images alone, he said that it's possibly a late Middle Palaeolithic handaxe dating from between 60,000 to 30,000 years ago. Han…
Created on: Friday 3rd August 2018
Last updated: Tuesday 31st March 2020
Spatial data recorded.

Record ID: MAS-D100205
Object type: TOBACCO PIPE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Complete example of a clay tobacco pipe of the bent billiard style, probably dating to the 19th century. Overall length of 80 mm, with the stem being 50 mm in length. The "short stem" is circular in profile at the heel, changing to a hexaganol profile 20 mm from the mouth piece, which bears beading around the aperture. The left hand side of the stem, from the users perspective, bears a cartouche comprising an embossed diamond lozenge in turn enclosing an incised inscription of SQUATTERS OWN. The opposite side of the stem bears an identical lozenge enclosing the incised word SYDNEY. The…
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100206
Object type: BOTTLES
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This find comprises of four stoneware bottles with the inscription "A PHILLIPS VICTORIA VI" and one stoneware ink bottle inscribed "BLACKWOODS" bearing a pouring lip. All vessels are constructed in a cream stoneware ceramic with a clear glaze. The four A PHILLIPS bottles are approximately 220 mm in overall height (150 mm from heel to sharply angled shoulder), with an exterior diameter of 80 mm in the body and 30 mm at the finish. The finish is of a type known as an applied finish, from glass bottle construction where an additional strip of glass is applied around the rim of the bottle…
Created on: Wednesday 29th August 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.