Record ID: MAS-1F5444
Object type: BEAD
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
Twenty-six long drawn beads with a single cylindrical central perforation extending along the length of the bead. Varying in size, the beads measure approximately 25 mm in length and 8 mm in diameter, and some signs of wear are visible. The beads all have an opaque white core, cased in opaque red, cased in opaque white and finally cased in translucent blue on the exterior. The inner layers form a star pattern. The diameter cross-section is roughly cylindrical in the centre, whilst at the upper and lower ends the cross-section changes to become faceted in an octagonal shape, allowing th…
Created on: Wednesday 3rd August 2016
Last updated: Friday 30th September 2016
Spatial data recorded.

Record ID: MAS-100007
Object type: SPOON
Broad period: MODERN
County: Devon
Workflow stage: Published
This spoon is made of a metal alloy, possibly copper alloy, and was probably originally plated. Its manufacture would have been cast. The Royal Australian Air Force (RAAF) crest is stamped into the end of the spoon. The crest features the RAAF monogram with a laurel wreath surmounted by a crown. This crest is the same style as that used for cap badges and is modelled from a Royal Air Force (RAF) crest. The more widely adopted RAAF crest was commissioned and designed in 1937 and accepted in 1939. It is composed of the imperial crown mounted on a circle featuring the words 'Royal Austra…
Created on: Thursday 8th September 2016
Last updated: Wednesday 14th December 2016
Spatial data recorded.

Record ID: MAS-6105BA
Object type: FIREARM
Broad period: NINETEENTH CENTURY
County: Cornwall
Workflow stage: Published
This gun is a QF (quick firing) 6-pounder Hotchkiss, a light 2.25 inch (57 mm) naval and coastal defence gun from the late 19th century. The design appears to be pre-1890 as it does not have the recoil system that was introduced at that time. The original 1885 Mk I was a built-up gun with a vertical sliding-block breech. The name comes from the French manufacturing company, Hotchkiss, who were the major supplier of light QF guns in the world. This type of gun became a standard torpedo defence weapon; many navies bought this same type of gun (Friedman 2011).
Created on: Monday 25th July 2016
Last updated: Friday 26th August 2016
Spatial data recorded.

Record ID: MAS-100009
Object type: SHOT
Broad period: POST MEDIEVAL
County: Essex
Workflow stage: Published
This is an assemblage of six round cast iron and stone projectiles of varying sizes. Due to the ubiquitous nature of their design, it is difficult to accurately date cannonballs with any certainty. This issue is compounded by the wide variation in designs and calibres of the cannons that fired them and the lifespan of the weapon, with obsolete designs often still in use on merchant ships long after they had fallen out of service with the various navies of Northern Europe, who also used captured weapons on their vessels. Cast iron cannonballs are thought to have appeared at some point d…
Created on: Wednesday 28th September 2016
Last updated: Thursday 13th April 2017
Spatial data recorded.

Record ID: MAS-100008
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Northumberland
Workflow stage: Published
This tooth is a cattle (Bos spp) molar from the upper jaw. It has four crescentic cusps (polycuspid) forming a square crown, as well as four root elements. These characteristics are typical of selenodont teeth which are found in ruminant herbivores (e.g. cattle, goats, sheep, or deer). Viewed from the side, the crown of the tooth forms triangular profiles which, in combination with ridges, makes the sideways jaw motion of ruminants an effective way to break-up tough plant matter. Thus their function as crushing and grinding teeth. The alternating layers of enamel, dentine and cementum…
Created on: Monday 12th September 2016
Last updated: Tuesday 27th September 2016
Spatial data recorded.

Record ID: MAS-100012
Object type: LANDING CRAFT INFANTRY
Broad period: MODERN
County: Suffolk
Workflow stage: Published
This hulk is situated on the River Deben, just outside of Melton (Suffolk) and is estimated to measure 11.5 m in length and 3 m in width. The structure is rectangular in shape with squared edges and straight sides. One end suggests the presence of a bulkhead and a hatch or doorway, while the other end is missing. Parts of possible rudder components are located close to the bulkhead, suggesting that this is the stern. Internal frames can be seen throughout the remaining structure; estimated measurements reveal a spacing of approximately 0.42 m. The hull is constructed of wood in a doubl…
Created on: Friday 30th September 2016
Last updated: Monday 10th October 2016
Spatial data recorded.

Record ID: MAS-100004
Object type: CLAY PIPE (SMOKING)
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published
All three white pipes here are complete, and are of the short or 'cutty' form. Two carry relief moulded decoration featuring Masonic emblems (incorporating the crossed compass and square), while the third is in the form of a male head, wearing a thin-brimmed cap, possibly a military figure. Pipes with Masonic emblems were made from the mid-18th century in the UK, but remained popular into the early 20th century, while the male head falls into a group of more elaborate decorative pipes with bowls moulded in the form of human heads and animals, common in the late 19th and early 20th cent…
Created on: Thursday 28th July 2016
Last updated: Tuesday 29th January 2019
Spatial data recorded.

Record ID: MAS-100011
Object type: CLAY PIPE (SMOKING)
Broad period: NINETEENTH CENTURY
County: Cornwall
Workflow stage: Published
This is a very worn example of a 'cutty' (short) pipe (total length 115 mm) with a round-based spurless bowl imitating a briar pipe, and decorated with multiple 'thorns' - small pointed protrusions around the stem and bowl. This type of bowl was in use between c. 1850 and 1910 (Atkinson and Oswald 1969: type 30), and the thorn design was one of the many decorative types popular during this period (e.g. Ayto 1994:11; Hammond 2009: figure 7). Clay tobacco pipes were manufactured (using two-piece moulds) in huge quantities in many towns and cities around the UK and were also imported fro…
Created on: Wednesday 28th September 2016
Last updated: Wednesday 12th October 2016
Spatial data recorded.

Record ID: MAS-100010
Object type: FOOD AND DRINK SERVING CONTAINER
Broad period: ROMAN
County: Essex
Workflow stage: Published
This is a group of nine sherds of ceramic, of which six are samian ware (also called terra sigillata). Samian pottery is a mould-made, glossy red, mass-produced, fine tableware. It was first manufactured in northern Italy at the end of the 1st century BC, however by AD 43 production had moved to Gaul (France). The production of samian ware ended around AD 260. The following interpretation is based on the photographs associated with this record. An examination of the fabric and surviving decorative elements may provide further information on the region of manufacture or production cent…
Created on: Wednesday 28th September 2016
Last updated: Thursday 13th April 2017
Spatial data recorded.

Record ID: MAS-100017
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Essex
Workflow stage: Published
This cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema. Providing a relative date for this cattle mandible is challenging without further e…
Created on: Tuesday 18th October 2016
Last updated: Monday 16th January 2017
Spatial data recorded.