Record ID: MAS-100009
Object type: SHOT
Broad period: POST MEDIEVAL
County: Essex
Workflow stage: Published
This is an assemblage of six round cast iron and stone projectiles of varying sizes. Due to the ubiquitous nature of their design, it is difficult to accurately date cannonballs with any certainty. This issue is compounded by the wide variation in designs and calibres of the cannons that fired them and the lifespan of the weapon, with obsolete designs often still in use on merchant ships long after they had fallen out of service with the various navies of Northern Europe, who also used captured weapons on their vessels. Cast iron cannonballs are thought to have appeared at some point d…
Created on: Wednesday 28th September 2016
Last updated: Thursday 13th April 2017
Spatial data recorded.

Record ID: MAS-100012
Object type: LANDING CRAFT INFANTRY
Broad period: MODERN
County: Suffolk
Workflow stage: Published
This hulk is situated on the River Deben, just outside of Melton (Suffolk) and is estimated to measure 11.5 m in length and 3 m in width. The structure is rectangular in shape with squared edges and straight sides. One end suggests the presence of a bulkhead and a hatch or doorway, while the other end is missing. Parts of possible rudder components are located close to the bulkhead, suggesting that this is the stern. Internal frames can be seen throughout the remaining structure; estimated measurements reveal a spacing of approximately 0.42 m. The hull is constructed of wood in a doubl…
Created on: Friday 30th September 2016
Last updated: Monday 10th October 2016
Spatial data recorded.

Record ID: MAS-100017
Object type: MAMMAL REMAINS
Broad period: UNKNOWN
County: Essex
Workflow stage: Published
This cattle mandible, or lower jaw, is comprised of two incomplete sections; cattle mandibles are rarely encountered in the archaeological record as conjoined pairs (Zhang et al. 2013). The smaller piece is an incomplete section featuring both pre-molars and molars. The larger piece is fairly complete, with the exception of teeth, extending all the way to the part in which the incisors and canines would be located. This front section is separated from the molar and pre-molar root holes by the diastema. Providing a relative date for this cattle mandible is challenging without further e…
Created on: Tuesday 18th October 2016
Last updated: Monday 16th January 2017
Spatial data recorded.

Record ID: MAS-100018
Object type: COSTREL
Broad period: POST MEDIEVAL
Workflow stage: Published
A salt-glazed stoneware barrel costrel, almost certainly German and probably dating to the 17th century. Recovered in 1966 during a dive at a depth of approximately 50-60 ft, and found in association with two lots of cannon, cannonballs and lead sheeting.
Created on: Friday 21st October 2016
Last updated: Wednesday 23rd May 2018
No spatial data available.

Record ID: MAS-D100029
Object type: AMPULLA
Broad period: MEDIEVAL
County: County Durham
Workflow stage: Published
An incomplete, flask shaped ampulla made of lead dating to the late Medieval period, around AD 1350 to 1500. These objects are believed to have been used to transport holy liquid from pilgrim sites. The ampulla, found in the River Wear, has a rounded body that extends upwards into the neck and diverges outwards towards the top. One handle on the side of the neck is intact and the remains of a second handle is visible on the other side of the neck. The obverse side of the ampulla is rounded and there are no visible decorations remaining. A relief decoration of a small equal-armed cross …
Created on: Tuesday 28th February 2017
Last updated: Wednesday 23rd May 2018
Spatial data recorded.

Record ID: MAS-O100031
Object type: TIMBER
Broad period: MODERN
County: Hampshire
Workflow stage: Published
Possible ships timber or part of other marine or land based structure. Truncated rounded timber with hole and evidence of mounting plate for furniture, broken or rotted off at one end exposing heart wood and a knot in the wood. Approximately 2000 mm long and 600 mm in diameter. The undamaged half of the timber appears in good condition, implying a more recent date for the timber, whereas the other part appears to have suffered extensive degradation. The arrangement of damage to the timber suggests it may have been partially submerged during its useful life, possibly as part of a shore …
Created on: Thursday 9th March 2017
Last updated: Friday 21st February 2020
Spatial data recorded.

Record ID: MAS-D100050
Object type: ARCHITECTURAL FRAGMENT
Broad period: POST MEDIEVAL
Workflow stage: Published
A rough cut square marble tile with pink colouration and marine growth visible. The tile measures approximately 0.3 m in length. It has not been possible to provide furter identification at this time.
Created on: Tuesday 14th March 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100036
Object type: SAUCER
Broad period: POST MEDIEVAL
Workflow stage: Published
Pewter bowl measuring 15 inches in diameter by 2 1/2 inches in depth. This find is a pewter dish or saucer (the term 'saucer' is used here to describe vessels used to contain sauces, in order to disguise or enhance the taste of food), probably dating somewhere between the 16th and 18th centuries - there are very similar examples, for instance, in 16th century contexts from Nonsuch Palace in Surrey (Rosemary Weinstein, 'Pewter vessels', in Biddle 2005). That doesn't mean that this vessel is a high-status object - saucers and dishes were among the most commonly made pewter items, and wo…
Created on: Tuesday 25th April 2017
Last updated: Tuesday 26th September 2017
No spatial data available.

Record ID: MAS-D100052
Object type: JUG
Broad period: POST MEDIEVAL
Workflow stage: Published
One badly damaged ceramic jug with marine encrustration. The vessel is probably stoneware, but possibly glazed redware as there appears to be the characteristic 'orange peel' texture of salt-glazed stoneware visible in the photo, with the 'reeding' that you get round the rims of stoneware vessels. If this is the case it is almost certainly German in origin. The rounded shape would place it somewhere in the second half of the 16th century or first half of the 17th century.
Created on: Tuesday 23rd May 2017
Last updated: Tuesday 3rd October 2017
No spatial data available.

Record ID: MAS-O100099
Object type: HANDAXE
Broad period: PALAEOLITHIC
County: Hampshire
Workflow stage: Published
Heavily sea-rolled and worn worked flint tool, covered in chalk patination (see third image). The flint measures 80 mm long, 60 mm wide and 30 mm thick, and unfortunately about 20% of the working end has recently broken off. Due to wear and damage on this hand-worked tool it has been difficult to confidently identify. Bryan Popple of Bournemouth Natural Science Society and Museum believes it could possibly be Homo neanderthalensis dating to around 200,000 years bp (before present). The smaller size indicates typical Neanderthal workings in comparison to the larger and older Homo heidel…
Created on: Saturday 5th August 2017
Last updated: Wednesday 23rd May 2018
Spatial data recorded.

Record ID: MAS-F100104
Object type: SHELL CASES
Broad period: MODERN
County: East Sussex
Workflow stage: Published
The shell case measures 660 mm long and is 152 mm in diameter at the base, and 116 mm in diameter at the neck though this has been buckled and stretched. The shell case appears to have been either constructed without a base, or it has been removed at some point in the past. The diameter of the neck and its overall size point to it being a 4.5-inch or possibly a 4.7-inch shell case. Without the base with the details of type, manufacturer and date of manufacture, the history and origin of this case is not clear. It would have been part of a fixed round, i.e. the shell was attached to the…
Created on: Wednesday 23rd August 2017
Last updated: Tuesday 8th May 2018
Spatial data recorded.

Record ID: MAS-F100108
Object type: PORTHOLE
Broad period: MODERN
County: East Sussex
Workflow stage: Published
This object is the remains of a brass porthole ring measuring 250 mm across with a brass rim 28 mm wide. It is thought that this frame would have been on the outside of the hull of the vessel while an internal frame on the inside of the vessel would have contained the glass element and a hinged deadlight (a metal plate that was both a curtain and a reinforcement against heavy seas). Portholes have been used for centuries to allow light and ventilation to enter the lower, darker levels of vessels and in some early cases, as a means of seeing out of a submersible. Portholes are waterti…
Created on: Wednesday 23rd August 2017
Last updated: Tuesday 8th May 2018
Spatial data recorded.

Record ID: MAS-D100128
Object type: HINGE
Broad period: NINETEENTH CENTURY
Workflow stage: Published
This record refers to the metal hinge and attached timber shown in the top left corner of image one, the other finds are dealt with under separate records. The object is approximately 305 mm in overall length and 204 mm in overall width. For the hinge element of the object only one leaf can be observed from the photo, which measures approximately 64 mm by 127 mm. Given the leaves are likely to be identical in size, this would suggest the overall width is approximately 127 mm making a regular square when fully opened. The metal of the hinge is in generally good condition, with some blu…
Created on: Monday 9th October 2017
Last updated: Wednesday 22nd April 2020
No spatial data available.

Record ID: MAS-D100134
Object type: HANDLE
Broad period: POST MEDIEVAL
Workflow stage: Published
The stem of a silver fork or spoon with a hallmark pattern. The set of four hallmarks located together on the piece of cutlery indicates it was made later than 1781, when this practice was first introduced. Based on this image, this type of spoon/fork is possibly a Fiddle pattern - this refers to the shape of the handle - and is a type introduced in the 1780s and still in production today. The Fiddle pattern means that there are shoulders on the stem near the bowl, which is seen on this example. The lower end of the stem juts out around 90 degrees but this example may have been worn d…
Created on: Monday 23rd October 2017
Last updated: Monday 30th March 2020
No spatial data available.

Record ID: MAS-O100169
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Published
Double edged blade covered with concretions, around 25 mm wide and 280 mm long. Displays iron oxidation, and the item has not been preserved well. The blade is roughly 200 mm long and the thicker handle is approximately 80 mm long. Following consultation with Henry Yallop of The Royal Armouries museum, this object can only be discribed as roughly the shape of a common blade form , i.e. roughly lenticular, and about 25 mm broad. What is not clear is whether it was once the complete blade, or that this is part of one, or alternatively that it was the part of another forged object, and o…
Created on: Saturday 20th January 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-F100172
Object type: AIRCRAFT COMPONENT
Broad period: MODERN
Workflow stage: Published
Rolls Royce Merlin 45 gear unit, serial number GU 69 677, with a truncated, heavily damaged and corroded, three bladed propeller. All three propeller blades have survived despite heavy corrosion, though the end of one is missing. The wiring in the propeller cam shaft is visible since the outer dome casing has partially disintegrated. The Merlin 45 engine was used in the Mk. V Supermarine Spitfire fighters, in Reconnaissance Spitfires (PR Mk. IG & P MK. IV), and early versions of the naval version the Supermarine Seafire Mk. IB and Mk. IIC). The Merlin 45 saw active service from ear…
Created on: Friday 27th April 2018
Last updated: Friday 27th March 2020
No spatial data available.

Record ID: MAS-D100174
Object type: CUTLERY
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the handle of a metal spoon or fork included within this group of finds. The diagnostic end of the piece is broken and therefore is uncertain whether this is a fork or spoon, and a lack of measurements precludes determining whether this is a tea or desert size in terms of spoon , or cake or main course size of fork. The fabric of the item, though slightly coroded, has a yellowish colour which may indicate gold or gold plating has been used in its manufacture. Alternatively, given the verdigris colour of the corrosion, may have been constructed in a copper alloy or…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100173
Object type: CLOCK
Broad period: NINETEENTH CENTURY
County: Kent
Workflow stage: Published
This record refers to the clock parts recovered as part of a group of finds. The finder described the items as 6 clock parts, the square glass from the clock face and the copper clock face from a grandfather clock, which suggests these finds represent parts of two separate clocks. Three of the clock parts, manufactured in a copper alloy, are circular and bear teeth around their circumference indicating they are part of the clockwork mechanism. Two other parts, also in copper alloy, are circular but without evidence of teeth. One has three screw holes arranged around a central circular…
Created on: Wednesday 2nd May 2018
Last updated: Thursday 9th April 2020
Spatial data recorded.

Record ID: MAS-D100177
Object type: TIMBER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
Section of highly degraded timber measuring approximately 216 mm in length by 31 mm at its widest point. The ends taper to a point, in a regular fashion that seems a deliberate aspect of the timber rather than part of the process of degredation. At least five nail or bolt holes are apparent in the face of the timber, further differentiating the piece from a section of unworked natural wood. The function of the timber is unidentifiable from the data available. As it has been recovered from a wreck it is likely to relate to the vessel itself and can tentatively be interpreted as a ships …
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.

Record ID: MAS-D100178
Object type: TOOTHBRUSH
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Published
This find consists of a brush handle and head manufactured from either bone, horn or ivory, with the bristles missing. The item is approximately 160 mm in overall length, with the head being c. 60 mm, a neck of c. 20 mm and a handle of 80 mm. The head of the brush is c. 15 mm wide, the neck c. 8mm and the handle c.10 mm. There is a small hole in the end of the handle, presumably for accomodating a lanyard or for hanging the brush from. In the head there are 32 holes for accomodating the bristles, with channels recessed and filled on the rear face where the bristles would have been secu…
Created on: Friday 1st June 2018
Last updated: Thursday 26th March 2020
Spatial data recorded.